0001 = Busy
0003 = ER_INV_PAR; invalid parameter in the string 
0005 = SYSTEM: Object no longer exists
0006 = SYSTEM: Invalid ObjectID
0008 = SYSTEM: No more objects can be created
0009 = SYSTEM: Object does not exist
0010 = Incorrect PROM Type, FIXRAM configured ?
0012 = Not enough free PROM/FLASH memory
0013 = PROM/FLASH not protected
0014 = SYSTEM: Not enough system non-cyclic objects
0015 = SYSTEM: Not enough stack area -> PLCSWCFG
0016 = SYSTEM: Stack is too small
0020 = SYSTEM: Task is already suspended
0021 = SYSTEM: Task is already running
0032 = SYSTEM: Attempt to allocate no memory
0033 = SYSTEM: Too much memory allocated at once
0034 = SYSTEM: Too much memory allocated at once
0035 = SYSTEM: Memory classes do not match
0036 = SYSTEM: The memory returned doesn't correspond to the allocation
0051 = SYSTEM: No enough queues configured
0052 = SYSTEM: Too little message buffer is available
0053 = Message queue overrun
0060 = No message received.
0065 = SYSTEM: Not enough semaphores configured (configuration).
0072 = WARNING: The RTC or system time is not set
0073 = WARNING: The RTC or system time is not set
0075 = SYSTEM: Too less timerdevices configured (configuration)
0100 = VISAPI not initialized.
0160 = Version conflict.
0170 = Not enough memory
0180 = Not enough resources.
0190 = VA_Setup already executed.
0240 = End of alarm list.
0245 = Alarm not acknowledged.
0246 = For example, no entries present in the historical list.
0248 = E.g. negative coordinates in drawing commands, incorrect pointers, etc.
0257 = SYSTEM: Incorrect device number
0258 = Frame driver not loaded.
0259 = SYSTEM: Driver function is not supported
1000 = The project could not be found.
1001 = This FBK (function block) is still active (busy).
1002 = The memory area cannot be reserved, i.e. it is full or not present.
1003 = Error freeing up the reserved memory area.
2000 = Incorrect access to hardware component
2001 = Incorrect access to hardware component
2002 = No subslot module inserted
2010 = Incorrect access to hardware component
2011 = Incorrect access to hardware component
2012 = Incorrect access to hardware component
2013 = Incorrect access to hardware component
2015 = Incorrect access to hardware component / Not enough DRAM
2016 = Incorrect access to hardware component
2017 = DRAM copied: Memory already assigned, warmstart not possible
2020 = Incorrect access to hardware component
2021 = Incorrect time at timer activation
2022 = Timer does not support interrupt
2023 = Timer does not support this time
2030 = Incorrect access to hardware component (CRM)
2031 = Incorrect offset for access to CRM
2032 = Incorrect length for access to CRM
2040 = Incorrect access to hardware component (IRC)
2041 = Mode is not supported by IRC
2042 = Incorrect interrupt number transmitted
2043 = Incorrect call by IRC-Routine
2045 = Incorrect mode for IRC_setvector
2046 = Incorrect vector for IRC_setvector
2047 = ENABLE for IRC_setvector not allowed in this mode
2048 = Too many IRQ context handlers
2049 = Default IRQ context handler
2050 = Error during watchdog activation
2055 = No inititialization for IRQ context
2060 = Incorrect access to hardware component (DIS)
2061 = Invalid row entry
2062 = Invalid column entry
2063 = Invalid ASCII character
2064 = Incorrect access to display (2010)
2070 = Incorrect access to hardware component (RTC)
2071 = Incorrect time when setting RTC.
2072 = RTC does not support Hold function
2073 = RTC not initialized
2074 = WARNING: No RTC RAM image
2075 = WARNING: Time / date changed
2080 = Incorrect access to hardware component
2090 = Incorrect access to hardware component (DMA)
2091 = Incorrect access to hardware component (DMA)
2100 = Incorrect access to hardware component (AS1)
2101 = Incorrect access to hardware component (AS1)
2110 = Incorrect access to hardware component (PAP)
2111 = Incorrect access to hardware component (PAP)
2250 = ME010/ME020/... added, coldstart required
2251 = ME010/ME020/... not existing, coldstart required
2252 = ME010/ME020/... changed, coldstart required
2260 = EX101 added, Coldstart necessary
2261 = EX101 missing, Coldstart necessary
2501 = Error installing the I/O controller SPSIO-Bus
2502 = Error initializing the remote I/O master
2503 = Warning: LS191 device driver not found
2900 = No interrupt handler installed for IRL1 Interrupt
3000 = Configuration error in system structures.
3001 = System Structure Configuration Error
3002 = No Memory for Local Allocation
3003 = Invalid Pointer in the System Structure
3004 = Invalid length for system structures.
3005 = System Structure Confuguration Error
3006 = Invalid Entry in System Structure
3007 = Invalid Access Flag
3008 = Frame driver not loaded.
3010 = Invalid Address for a B&R Module
3011 = Offset Error in a B&R Module
3012 = Invalid Section in a B&R Module
3013 = Invalid Data length accessing a B&R Module
3014 = Invalid Block Number
3015 = Module data in the contents directory module and B&R module is different
3016 = ERR_MO_NOINSTALL
3017 = ERR_MO_WRONG_CS
3018 = Invalid name length for a B&R Module
3019 = module module_name not available
3020 = IO Access: No valid table
3021 = IO Access: Incorrect access flag
3022 = IO Access: No PLC IO
3023 = IO Access: Incorrect Parameter
3026 = Too many memory types in PCCSWCFG module
3027 = Memory Info: Attempt in the next bitmap
3028 = Invalid Memory Class
3029 = Not enough Memory Available
3030 = No memory available (target system operating system V1.05)
3031 = Invalid memory class
3032 = ERR_SM_WRONG_DATPTR
3033 = System timer not available
3034 = HS Task class timer not available
3035 = Memory manager: Semaphore occupied
3036 = AVT Link count Error
3037 = AVT already exists
3038 = ERR_AVT_UPDATE
3039 = Global FB not found -> Load library
3045 = Checksum in B&R Module Header is wrong
3050 = No Comm Area configured for a communication task
3051 = No entry found in the connection list of the Comm Area
3052 = Invalid state of a connection in the Comm Area
3053 = No more entries are free in the connection list of the Comm Area
3054 = Invalid Index for KA_del_entry
3060 = ERR_HI_NOMOD
3061 = ERR_ER_NOMOD
3062 = Multiple run through of the ring buffer
3070 = Invalid flag
3071 = Invalid pointer
3072 = Invalid Task Class for a PV to be forced
3073 = Invalid data type for a PV to be forced
3074 = Invalid Base pointer for a PV to be forced
3075 = Invalid B&R physical address (Extension bit) for a PV to be forced
3076 = Invalid Index, PV will not be forced
3077 = This PV is already forced
3080 = Incorrect offset
3085 = No User Exception task found
3089 = Error 'info' in the communication
3090 = device != 0 is not allowed in the base system V1.10.
3091 = Invalid function number in a INSTTRAP-Call
3092 = Invalid function number in a BURTRAP-Call
3093 = Invalid function number in a BTCTRAP-Call
3094 = Invalid function number in a PPTRAP-Call
3100 = Size of a bit map unit is too large or 0
3101 = Attempt to generate a bitmap with 0 units
3102 = The pointer in the bitmap management data is not WORD aligned
3103 = A large enough memory area could be found
3104 = Invalid pointer
3105 = The requested data length is larger than the total memory area
3106 = BITMAP: The memory to be freed is already free
3120 = SYS_SERVICE: Initialization error
3121 = SYS_SERVICE: Incorrect Mode
3122 = SYS_SERVICE: Entry to be deleted is not available
3123 = SYS_SERVICE: Entry defined twice
3124 = SYS_SERVICE: Too many entries
3125 = SYS_SERVICE: Parallel call, try again
3130 = NonCyclic-Loader: Initialization not possible
3131 = NonCyclic-Loader: Entry not found
3150 = Incorrect mode when calling MO_copy
3300 = Incorrect resource number
3301 = Invalid offset for read/write access to a data object.
3302 = Incorrect module/object status
3303 = Error from UT_recmsg()
3304 = SM_attach() timed out
3305 = Object already exists
3306 = Object already exists
3307 = BURLIB: Linkcnt <> 0 or Linkcnt > 127
3308 = Error occurred with DA_burn() / DA_fix()
3309 = Error from UT_recmsg()
3310 = Inactive area accessed
3311 = Invalid area code
3312 = Invalid extension bit
3313 = Invalid version of the SYS_LIB library
3314 = Invalid length entry
3315 = Maximum link count (127) reached
3316 = Link count = 0 (AVT_release())
3317 = Illegal parameter
3319 = Wrong module type
3320 = Semaphore object already deleted
3324 = Object not available
3328 = Incorrect object type (module type)
3332 = Object not found or object table full (with SM_create())
3333 = Long names for PVs are not supported
3336 = Invalid object ID or object with this name not found (SM_ident())
3365 = BURLIB: Not enough semaphore configured (PLCSWCFG)
3560 = No semaphore object available
3564 = Semaphore occupied
3568 = Semaphore object deleted
3582 = invalid time
3584 = No time available
3588 = Invalid date
3592 = Invalid time
3596 = Invalid tick number
3600 = Memory not available
3601 = Memory not available
3602 = Not enough memory in the OS area.
3603 = Not enough memory for digital variables in the memory pool.
3604 = Not enough memory in Ana. System Area
3605 = Not enough memory in the debug area.
3606 = Not enough memory in the copy area.
3607 = Not enough memory in the driver area.
3608 = Not enough memory available in the PP DRP area.
3610 = Not enough memory in Dig. IO Area
3611 = Too little memory available in the analog I/O area.
3612 = Not enough memory in IO Management Area
3620 = Not enough memory for digital RIO variables.
3621 = Not enough memory for analog RIO variables.
3622 = Not enough memory in the RIO management area.
3623 = Not enough memory in the local RIO area.
3698 = Not enough memory available for malloc().
3699 = Invalid memory class with MEM_alloc.
3700 = Invalid input parameter in the release memory function
3701 = Invalid input parameter in the release memory function
3702 = Invalid parameter for MEM_free in the OS area.
3703 = Invalid parameter for MEM_free in the digital internal variable area.
3704 = Invalid parameter for MEM_free in the analog internal variable area.
3705 = Invalid parameter for MEM_free in the debug area.
3706 = Invalid parameter for MEM_free in the copy area.
3707 = Invalid parameter for MEM_free in the driver area.
3708 = Invalid parameter for MEM_free in the PP DPR area.
3710 = Invalid parameter for MEM_free in the digital I/O area.
3711 = Transferred data length or pointer to data is incorrect.
3712 = Invalid parameter for MEM_free in the IO VW area.
3720 = Invalid parameter for MEM_free in the digital RIO area.
3721 = Invalid parameter for MEM_free in the analog RIO area.
3722 = Invalid parameter for MEM_free in the RIO VW area.
3723 = Invalid parameter for MEM_free in local RIO area.
3798 = Invalid parameter for free().
3799 = Invalid memory class with MEM_free.
3800 = Invalid memory management structure in the user area.
3801 = Invalid memory management structure in the PCCSW area.
3802 = Invalid memory management structure in the OS area.
3803 = Invalid memory management structure in the digital internal variable area.
3804 = Invalid memory management structure in the analog internal variable area.
3805 = Invalid memory management structure in the debug area.
3806 = Invalid memory management structure in the copy area.
3807 = Invalid memory management structure in the driver area.
3808 = Invalid memory management structure in PP DPR area.
3810 = Invalid memory management structure in the digital I/O area.
3811 = Invalid memory management structure in the analog I/O area.
3812 = Invalid memory management structure in IO VW area
3820 = Invalid memory management structure in the digital RIO area.
3821 = Invalid memory management structure in the analog RIO area.
3822 = Invalid memory management structure in RIO VW area.
3823 = Invalid memory management structure in the local RIO area.
3899 = Invalid memory class.
3910 = Incorrect PROM type. No FIXRAM configured?
3912 = Not enough PROM/FLASH memory available.
3913 = PROM/FLASH not erased.
3915 = PROM/FLASH cannot be burned. Write-protected?
3922 = PROM/FLASH with programming voltage not deleted.
3923 = PROM/FLASH verify not OK.
3990 = The checksum in the program code isn't correct in RAM.
4000 = Device number does not exist
4001 = ALI: The referenced Telegram Queue (Layer7-SAP) doesn't exist
4002 = No buffer free for function (srv_cnt too low in PBinit()). This error can also occur when reloading a BR module with PROFIBUS functions (solution: trigger WARMSTART).
4003 = ALI: Wrong transmittion direction of the selected Telegram queue (In/Out)
4004 = ALI: The version of the NW configuration module is not supported
4010 = ALI: Not enough memory available
4011 = Connection number does not exist
4012 = Connection is inactive
4013 = ALI: Invalid operation on an inactive connection
4014 = Connection cannot be contacted
4015 = ALI: The given connection name is unplanned
4016 = ALI: Warning: Executing Hidden Abort
4017 = ALI: Connection is not a client connection
4018 = INA2000: Incorrect path
4040 = ALI: INIT not OK
4041 = ALI: Error accessing to the communication module
4042 = ALI: The planned serial driver is not supported
4043 = ALI: Overrun of the communication buffer for serial communication
4044 = ALI: The SIO-Timer has too little us/TICK
4045 = ALI: Timer not suitable for cyclic operation or IRQ
4046 = ALI: Timeout in PP Handshake
4050 = ALI: The maximum telegram length was exceeded during coding
4051 = ALI: The FRAME length was exceeded
4052 = ALI: The telegram is incorrectly coded and can't be decoded
4053 = ALI: The list available is too small
4060 = ALI: Non-allowed type of ALI Device (SAP-List)
4061 = ALI: The configured number of the communication buffer is not enough
4062 = ALI: The configured maximum telegram length is not enough
4063 = ALI: The PROFIBUS Service is not supported
4064 = ALI: The version of the OV is incompatible with its communication partners
4065 = ALI: The SAP List is not available on this device
4080 = ALI: The selected function is not implemented.
4081 = ALI: The ALI client module must be loaded for client services.
4200 = Invalid interface specified.
4201 = Invalid value for parity.
4202 = Invalid value for baud rate.
4700 = The VB/DS handle is incorrect.
4702 = Task/Request for confirmation not found.
4703 = Too many open requests.
4708 = Error in driver OPEN.
4710 = No memory for (MEMCL_PCCSW) for DS structures.
4711 = No memory (MEMCL_PCCSW) for DS drivers.
4715 = Too many open VLs.
4720 = Entry in the table disabled.
4721 = Data type > last_dt
4722 = BCD2/4/8 in the standard conv.
4723 = Incorrect data type.
4724 = Error in user conversion.
4801 = Incorrect connection number
4855 = WARMSTART occurred
4856 = RQB not free: still required for sending
4857 = No tableau keybuffer reserved
4858 = No network card entry in the configuration module
4859 = Wrong initializing parameters
4860 = Error 1 during service processing
4861 = Error 2 during service processing
4862 = Error 3 during service processing
4863 = Error 4 during service processing
4864 = Received data length is larger than the reserved data buffer
4865 = Error response was received
4866 = Incorrect spec_id from the user
4867 = Service is not supported
4868 = Error occurred when sending an unconfirmed service
4869 = A PROFIBUS function was called, although no PBinit call had previously been carried out
4870 = Service management error 1 occured
4871 = Service management error 2 occured
4872 = Service management error 3 occured
4873 = Service management error 4 occured
4874 = Not enough array elements were given with PBgetOVM()
4875 = Connection is not VB orientated (error with PBconn)
4876 = A connect or abort was carried out on an AUTO connection
4877 = Connection is already set to AUTO (another connect was triggered)
4878 = Connection is not established and connect call was made
4879 = Invalid command was given
4880 = PBinit() was called twice
4881 = PBinit() does not support additional parameters at the moment
4882 = Connection cannot be used for PROFIBUS functions (incorrect device)
4883 = Specified connection is for another device
4884 = A function was called although PBinit() was not active
4885 = Given name is too long
4886 = PBinit(): Configuration module contains no network device
4887 = Error when requesting a buffer
4888 = Rsync or Ssync Ptr is a NULL pointer
4889 = Reject: Too many parallel services were activated on one connection Only one download is allowed to be handled on a connection at any one time (if a second download is called while the first is still active, this error message is returned)
4890 = on on connection only one DL can be initialized (this error messages appears if a second is started)
4891 = Error processing a download; (DL state maschine does not wait for a TERMDL_response)
4892 = Download is currently active! TerminateDL is sent
4893 = State conflict during download
4894 = An invalid service was received with PBrec()
4895 = Incorrect length given for a download
4896 = Terminate download received during download process
4897 = Other station reports: Final Result 0 (=Error)
4898 = Abort: User pressed a key
4899 = Command is not ready
4900 = NW: Not enough memory on the NW card (-> NWCFG)
4901 = NW: Layer2 LSAP Number too high (-> NWCFG)
4902 = NW: Connection attribute for a VB is invalid (-> NWCFG)
4903 = NW: Dev_kbl_index of a VB is wrong (-> NWCFG)
4904 = NW: Error occurred during Layer2 SAP Configuration
4905 = NW: A Layer2 LSAP is being accessed by several connections (-> NWCFG)
4906 = NW: Error while initializing Layer2
4907 = NW: Error starting Layer 2
4908 = NW: Checksom Error during Download
4910 = NW: Meminit does not deliver a DPR_struct_ptr
4912 = NW: IN FIX KBL planned connection is not supported (-> NWCFG)
4920 = NW: No valid FMA7 Service
4921 = NW: FMA7 Service can not be executed
4923 = PBsend(): Parameter invalid
4924 = PBsend(): Operating equipment for the local FDL controller is not available or not adequate
4925 = PBsend(): Source SAP (local SAP) is not configured for the desired service
4926 = PBsend(): SAP is already configured
4927 = PBsend(): The locale station is not in the logical token ring
4928 = PBsend(): No, or no plausible reaction from the remote station
4931 = PBsend(): Negative acknowledgement (remote user/FDL interface error)
4932 = PBsend(): Negative acknowledgement (operating equipment for the remote FDL controller not available or not adequate)
4933 = PBsend(): Service or remote address not activated for destination SAP (remote SAP)
4939 = PBsend(): Positive acknowledgement for send data; negative acknowledgement for receive data (as not available for remote station)
4942 = PBsend(): Negative acknowledgement for send data (as operating equipment for the remote station is not available or not adequate)
5000 = No PLC task in the task class
5001 = Invalid task class cycle time
5002 = Communication idle time only possible in 1 TC.
5003 = Communication idle time can be max. 50% of the total task class time.
5004 = No timer device entered for the I/O scheduler in Sysconf.
5005 = Incorrect task class tolerance
5010 = Stack overrun caused by cyclic program
5011 = Task class numbers don't match
5020 = No input data when shoveling for the InitUP
5021 = No output data when shoveling for the InitUP
5030 = No input for the interrupt task class.
5100 = Cycle time violation in the task class
5150 = Loader: No GOT section in module
5151 = Loader: GOT ID not supported
5152 = Target loader not found on target
5153 = Loader: B&R module start not found.
5154 = Loader: Loader management not initialized
5155 = No program heap memory available
5200 = Stack overrun caused by cyclic program (HS task class)
5201 = The data area of the HS task class has been destroyed
5202 = Cycle time violation of HS task class
5203 = There is no task class #1
5500 = This I/O controller is not implemented
5501 = Incorrect parameter.
5502 = HW configuration: At least EXERMO V1.40 required
5503 = Timeout during cyclic command on the IO controller
5504 = The lenght of the line must not be more than 1024 characters!
5520 = No CM471 module available
5521 = WRITE_OVERFLOW; write ring buffer is full
5522 = READ_OVERFLOW; read ring buffer is full, data from CM471 is lost!
5523 = read ring buffer is empty, no more data
5550 = No information available (incorrect context).
5551 = Function was called simultaneously in more than one resource.
5552 = Force cannot be performed for analog data with uneven length or uneven address.
5553 = Function cannot be called in timer resources.
5554 = I/O module inserted but the module type doesn't match.
5555 = I/O module, screw-in module or system module not inserted or incorrect.
5556 = Incorrect data_adr address given.
5557 = Incorrect intern_off offset or incorrect data_len length.
5558 = Function is not allowed to be called on parallel processor or multi-processor.
5559 = Function in progress (call in next cycle required).
5560 = IO-Library: FBK not allowed for this CPU type
5561 = This module EMU_2005 is for another CPU type
5562 = Function not possible with optimized I/O emulation.
5563 = Function not possible for systems with EX350.
5564 = No access to 2010 I/O or 2005 expansions.
5565 = No 2005 basis I/O available.
5566 = Hardware configuration code not supported.
5567 = FBK data no longer available in I/O internal pool.
5568 = IO-Library: IO exception caused of last ASIC#2 command (IO_check)
5569 = IO-Library: sc_adr must be WORD-aligned (IO_mphydef)
5570 = IO2003 Manager not available or memory problem
5571 = IO2003 Initialization faulty
5572 = IO2003 Busy Timeout in cycle
5573 = IO2003 Configuration change
5574 = IO2003 AIF Version not supported
5575 = IO2003 ANP Version not supported
5576 = Error in direct I/O.
5577 = IO2003 Data type error for elements of SYS2003
5578 = 2003: Direct I/O overflow.
5579 = 2003: Old direct I/O task still active.
5580 = IO2003 Maximum number of IO modules to the right of CPU exceeded
5581 = IO2003 Special module access is only possible using special FBKs possible
5582 = IO2003: Manager not compatible with version of Automation Runtime
5590 = LS472 Manager not initialized
5591 = LS472 - Incorrect check sum for communication
5592 = LS472 - ANP does not respond
5593 = LS472 - Incorrect response for watchdog report
5594 = LS472 - Incorrect slot number
5595 = LS472 - Slot not enabled
5596 = LS472 - Register15 response for Read
5600 = RTC_snF(): Switch point not for the current year.
5601 = RTC_snF(): Switching months swapped.
5602 = RTC_snF(): Switching point would cause a date change.
5605 = RTC_bfix(): Maximum correction time per day exceeded.
5606 = RTC_bfix(): Maximum total correction time exceeded.
5812 = CPU-Kennung im empfangenen Request-Header ist ungleich 0xF. CPU-Kennung wird von der DRV_3964-Bibliothek nicht unterstützt
5900 = The PLC task/HS task chaining is destroyed
6000 = The system manager is not correctly configured
6001 = The cyclical activities of the system manager are missing
6002 = System cycle time violation/Total time bottle-neck in system
6009 = B&R Library or mathematic library not installed
6010 = System Manager internal Error
6011 = System Manager internal Error
6015 = Incorrect parameter transmitted to system manager
6016 = Communication channel is already being used
6017 = Communication channel is not used
6020 = Cyclic system manager action is not implemented
6021 = Module checksum destroyed
6022 = System Manager Checksum destroyed
6023 = Checksum of the system anchor destroyed
6024 = Checksum of the base management table destroyed
6025 = Checksum of the system management table destroyed
6026 = Too many EX100 / NW100 modules
6030 = System Structure No. 0 destroyed
6031 = System Structure No. 1 destroyed
6032 = System Structure No. 2 destroyed
6033 = System Structure No. 3 destroyed
6034 = System Structure No. 4 destroyed
6035 = System Structure No. 5 destroyed
6036 = System Structure No. 6 destroyed
6037 = System Structure No. 7 destroyed
6038 = System Structure No. 8 destroyed
6039 = System Structure No. 9 destroyed
6040 = System Structure No. 10 destroyed
6041 = System Structure No. 11 destroyed
6042 = System Structure No. 12 destroyed
6043 = System Structure No. 13 destroyed
6044 = System Structure No. 14 destroyed
6045 = System Structure No. 15 destroyed
6046 = System Structure No. 16 destroyed
6047 = System Structure No. 17 destroyed
6048 = System Structure No. 18 destroyed
6049 = System Structure No. 19 destroyed
6050 = System Structure No. 20 destroyed
6051 = System Structure No. 21 destroyed
6052 = System Structure No. 22 destroyed
6053 = System Structure No. 23 destroyed
6054 = System Structure No. 24 destroyed
6055 = System Structure No. 25 destroyed
6056 = System Structure No. 26 destroyed
6057 = System Structure No. 27 destroyed
6058 = System Structure No. 28 destroyed
6059 = System Structure No. 29 destroyed
6060 = B&R Module No. 0 destroyed
6061 = B&R Module No. 1 destroyed
6062 = B&R Module No. 2 destroyed
6063 = B&R Module No. 3 destroyed
6064 = B&R Module No. 4 destroyed
6065 = B&R Module No. 5 destroyed
6066 = B&R Module No. 6 destroyed
6067 = B&R Module No. 7 destroyed
6068 = B&R Module No. 8 destroyed
6069 = B&R Module No. 9 destroyed
6070 = B&R Module No. 10 destroyed
6071 = B&R Module No. 11 destroyed
6072 = B&R Module No. 12 destroyed
6073 = B&R Module No. 13 destroyed
6074 = B&R Module No. 14 destroyed
6075 = B&R Module No. 15 destroyed
6076 = B&R Module No. 16 destroyed
6077 = B&R Module No. 17 destroyed
6078 = B&R Module No. 18 destroyed
6079 = B&R Module No. 19 destroyed
6080 = B&R Module No. 20 destroyed
6081 = B&R Module No. 21 destroyed
6082 = B&R Module No. 22 destroyed
6083 = B&R Module No. 23 destroyed
6084 = B&R Module No. 24 destroyed
6085 = B&R Module No. 25 destroyed
6086 = B&R Module No. 26 destroyed
6087 = B&R Module No. 27 destroyed
6088 = B&R Module No. 28 destroyed
6089 = B&R Module No. 29 destroyed
6090 = B&R Module No. 30 destroyed
6091 = B&R Module No. 31 destroyed
6092 = B&R Module No. 32 destroyed
6093 = B&R Module No. 33 destroyed
6094 = B&R Module No. 34 destroyed
6095 = B&R Module No. 35 destroyed
6096 = B&R Module No. 36 destroyed
6097 = B&R Module No. 37 destroyed
6098 = B&R Module No. 38 destroyed
6099 = B&R Module No. 39 destroyed
6100 = APPLICATION LOADER: Invalid System Message with SY_Event
6101 = APPLICATION LOADER: Invalid Service ID in Download
6102 = APPLICATION LOADER: Invalid MI code in download
6103 = APPLICATION LOADER: Invalid State of Connection
6104 = APPLICATION LOADER: Invalid data type in service
6105 = APPLICATION LOADER: KA-Ptr = NULL
6200 = VARIABLE ACCESS TASK: DATA TYPE - Error
6201 = VARIABLE ACCESS TASK: No access rights with PV-read
6202 = VARIABLE ACCESS TASK: No access rights with PV-write
6203 = VARIABLE ACCESS TASK: Index Error
6204 = VARIABLE ACCESS TASK: PV not found
6205 = VARIABLE ACCESS TASK: VL not found
6206 = VARIABLE ACCESS TASK: Access Error
6207 = VARIABLE ACCESS TASK: Invalid system message with SY_Event
6208 = VARIABLE ACCESS TASK: Invalid connection state
6209 = VARIABLE ACCESS TASK: Invalid MI-Code
6210 = VARIABLE ACCESS TASK: KA-Ptr = NULL
6211 = VARIABLE ACCESS TASK: Invalid Base pointer
6212 = VARIABLE ACCESS TASK: No valid B&R Address
6213 = VARIABLE ACCESS TASK: Index points to a descriptor
6300 = PROGRAM INVOCATION: Invalid Event Type
6301 = PROGRAM INVOCATION: Invalid System Message
6302 = PROGRAM INVOCATION: PI_Index error
6303 = PROGRAM INVOCATION: Invalid MI-Code
6304 = PROGRAM INVOCATION: Invalid Object
6305 = PROGRAM INVOCATION: Invalid state of the Objects
6306 = PROGRAM INVOCATION: KA-Ptr = NULL
6307 = PROGRAM INVOCATION: No more connections free
6308 = PROGRAM INVOCATION: OS Error - t_start
6310 = KA-Ptr = NULL
6311 = Event-Routine = NIL-Ptr
6350 = MPServer: Not a valid instruction code
6351 = MPServer: Multiprocessor not available
6352 = MPServer: Wrong ionstruction data length
6353 = MPServer: Timeout in Handshake to multiprocessor
6354 = PP HSTC job not ready
6355 = No PP HSTC installed on the PP
6380 = No memory available
6381 = No UserFlashPROM
6382 = No entry for UserFlashPROM
6383 = No 64 KB block available in UserFlashPROM
6384 = No 64 KB block available in UserFlashPROM
6385 = Target not supported
6386 = Internal error.
6387 = Internal error
6388 = Faulty data object found during boot
6389 = Internal DMEMORY handle 0 or invalid (-> memory error)
6390 = DMEMORY full
6391 = id parameter invalid or incorrect module type
6392 = size parameter has an incorrect value
6393 = Data object with the parameter name already exists
6394 = No 64 KB block available in UserFlashPROM
6395 = DMEMORY busy
6396 = Parameter data is NULL
6397 = Block number too large
6398 = Incorrect block_no
6400 = Checksum of the system table management table is wrong
6401 = Checksum of the system table is wrong
6402 = Checksum of a B&R Module is wrong
6403 = Cyclic operation: Incorrect B&R module checksum.
6404 = No system manager exsits
6405 = Cold start: Checksum of B&R module is incorrect
6406 = The RIO Master does not report
6407 = Timeout with RIO-Life list Creation
6408 = There is an invalid I/O type in the system bus table
6409 = Referenced RIO-Slave does not exist
6410 = Empty RB Section in configuration module
6412 = Warning: Network is configured in NWCFGMOD, but is not in the system bus
6413 = Warning:Unknown NW Type
6414 = Warning:NW Module Number 0, but more than 1 NW module configured
6415 = Memory management in User RAM corrupted, possible battery problem
6420 = Multiprocessor doesn't answer to 1st handshaking part
6421 = Error 6421: "Name of Task": no processor-linking information for PVstatusN.
6422 = Multiprocessor doesn't answer to 2nd handshaking part
6424 = MP: Timeout waiting for CPU_INIT
6426 = MP: Timeout waiting for CPU_READY
6428 = MP: Timeout waiting for DPR-OK-Signal of the MP-Server
6429 = MP: Timeout waitint fro Bootup_OK from the PLC CPU
6430 = MP-Warning: more than 1 HS task class configured
6432 = MP-Warning: IRQ Task class configured
6433 = APM PROM changed:- Coldstart required
6434 = FIXSETUP : FIXRAM is defective; it will be cleared and a TOTALINIT will be executed
6435 = FIXRAM not supported on this HW
6436 = Maximum 1 IRQ task class possible
6437 = EX350 changed, automatic cold start
6439 = partition 3 is smaller than partition 2 --> partition 1 is used
6440 = For the selected sysconf settings too less system RAM is available
6441 = Global PV configuration error
6500 = TASK-TASK-COMMUNICATION: Invalid Event
6501 = TASK-TASK-COMMUNICATION: Invalid MI-Code
6502 = TASK-TASK-COMMUNICATION: Invalid Instruction number
6503 = TASK-TASK-COMMUNICATION: Invalid Comm. ID
6504 = TASK-TASK-COMMUNICATION: Invalid data type
6505 = TASK-TASK-COMMUNICATION: KA-Ptr = NULL
6506 = TASK-TASK-COMMUNICATION: No more connections free
6507 = TASK-TASK-COMMUNIKATION: ALI Error
6520 = DEBUGGER: Invalid MI-Code
6521 = DEBUGGER: No more connections free
6522 = DEBUGGER: Invalid TT-Message-Type
6523 = DEBUGGER: Invalid Instruction number
6524 = DEBUGGER: Invalid Event Info
6525 = DBTRACER: Function not supported
6526 = DBTRACER: Debug task is not installed on the PLC
6527 = DBTRACER: Task has no GOT Section
6529 = DBTRACER: Maximum number of breakpoints reached (64)
6530 = DBTRACER: Entered B&R Module is not on the PLC
6531 = DBTRACER: Debug module state DB_NONE
6532 = DBTRACER: Debug module state DB_RUNNING
6533 = DBTRACER: Debug module state DB_STOPPED
6534 = DBTRACER: Error in task start (SY_start) see error module
6535 = DBTRACER: Debugger is in isolated nmode
6536 = DBTRACER: Debugger is in system mode
6537 = DBTRACER: System task or Usertask is in a ROM
6538 = DBTRACER: Start_offset not in code section
6539 = DBTRACER: Offset not in code section
6540 = DBTRACER: Internal error - Incorrect MI-Code
6541 = DBTRACER: Internal error - Incorrect Task No
6542 = DBTRACER: Internal error - Incorrect TaskTask-TYPE
6543 = DBTRACER: Internal error - Incorrect System Event
6545 = DBTRACER: Internal error - Incorrect Status in Task
6546 = DBTRACER: Bus error when accessing data
6547 = DBTRACER: Address error when accessing data
6551 = DBTRACER: The data object with Trace Definition not on PLC
6552 = DBTRACER: Not enough memory available in user area or OS area
6553 = DBTRACER: Variable not available on PLC
6560 = DBTRACER: Module type not supported
6563 = DBTRACER: Format error in Trace Definition file
6564 = DBTRACER: Format erro in Trace Data file
6565 = DBTRACER: Incorrect Task Type (no PLC Task)
6566 = DBTRACER: PLC Task does not exist on the PLC
6567 = DBTRACER: No Trace defined
6568 = DBTRACER: Trace already active for this PLC Task
6569 = DBTRACER: No TracePV in Trace Definition file
6570 = DBTRACER: System Software too old (PCCSW < X2.43)
6571 = DBTRACER: Number of active LineCoverage tasks exceeded
6573 = DBTRACER: No Line Coverage task defined
6574 = DBTRACER: Error from GOT Function (see error module)
6575 = DBTRACER: LineCoverage task started, Task not active
6580 = PBIXMAN: Management damaged
6581 = PBIXMAN: Index only valid in range $100-$2FF
6582 = PBIXMAN: PV name is too long (max. 32 characters)
6583 = PBIXMAN: Undefined Index
6584 = PBIXMAN: Data object PBIXDATA missing
6585 = PBIXMAN: PV-Index is not defined in data object PBIXDATA
6586 = PBIXMAN: Not enough free user memory
6587 = PBIXMAN: Subindex not defined (pbixdata)
6600 = The master spooler sends no event to the instruction sender
6610 = Unknown spool instruction
6620 = The Asic2 is not finished
6621 = Shovel processor can no longer be initialized (SG3 only)
6622 = Serial/Parallel error when spooling! Is the IP present? (SG3 only)
6623 = Shovel processor interrupt (SG3 only)
6624 = Automatic module addressing failed (SG3 only)
6625 = Shovel processor timeout!
6626 = Spool-SP can only be called in the INIT phase
6627 = Incorrect type or invalid FBK parameter
6628 = Specified system module (B&R 2005) not found (SG3 only)
6629 = Specified remote I/O master not found (SG3 only)
6630 = Spooler: The master spooler is not finished
6631 = RIO spooler: Instruction timeout (SG3 only)
6632 = Too many parallel spool I/O modules
6633 = Spooler: Data length to large for call from SPdirect
6634 = Spooler: Incorrect command for call from SPdirect
6635 = Internal error when spooling for 2005
6636 = Spooler: Incorrect mode for SPprio
6637 = Invalid module address, FBK parameter module_adr , or FBK parameter pDevice
6638 = Master spooler including spool queue not found
6639 = Spooler: Module ident invalid for FBK call
6640 = Invalid FBK parameter master_no
6641 = Invalid FBK parameter slave_no
6650 = No response from the slave spooler! Was an exception triggered on the IP?
6652 = Slave spooler timeout waiting for data from the main CPU
6654 = Unknown slave spooler instruction
6655 = IP modules error (slave spooler)
6656 = Invalid module type during downspool
6657 = IP modules error (slave spooler)
6658 = Incorrect install/start info (all software objects have to be installed and started!) (SG3 only)
6659 = Spooler: The queue for the drum sequencerdoesn't exist
6660 = Error which makes any additional spooling impossible.
6662 = Timeout waiting for the IP to boot
6666 = Spooler still working
6670 = Error in I/O system (SG4 only)
6699 = Timeout calling function block
6700 = Stack of Task No. 0 destroyed
6701 = Stack of Task No. 1 destroyed
6702 = Stack of Task No. 2 destroyed
6703 = Stack of Task No. 3 destroyed
6704 = Stack of Task No. 4 destroyed
6705 = Stack of Task No. 5 destroyed
6706 = Stack of Task No. 6 destroyed
6707 = Stack of Task No. 7 destroyed
6708 = Stack of Task No. 8 destroyed
6709 = Stack of Task No. 9 destroyed
6710 = Stack of Task No. 10 destroyed
6711 = Stack of Task No. 11 destroyed
6712 = Stack of Task No. 12 destroyed
6713 = Stack of Task No. 13 destroyed
6714 = Stack of Task No. 14 destroyed
6715 = Stack of Task No. 15 destroyed
6716 = Stack of Task No. 16 destroyed
6717 = Stack of Task No. 17 destroyed
6718 = Stack of Task No. 18 destroyed
6719 = Stack of Task No. 19 destroyed
6720 = Stack of Task No. 20 destroyed
6721 = Stack of Task No. 21 destroyed
6722 = Stack of Task No. 22 destroyed
6723 = Stack of Task No. 23 destroyed
6724 = Stack of Task No. 24 destroyed
6725 = Stack of Task No. 25 destroyed
6726 = Stack of Task No. 26 destroyed
6727 = Stack of Task No. 27 destroyed
6728 = Stack of Task No. 28 destroyed
6729 = Stack of Task No. 29 destroyed
6800 = Stack of SS task class destroyed
6810 = Stack overrun caused by init program
6811 = Supervisor stack for task class in InitUP destroyed
6812 = Stack overrun caused by init program (HS task class)
6813 = Supervisor stack of HS task class in InitUP destroyed
6814 = User stack of OS Task destroyed
6815 = Supervisor stack of OS Task destroyed
6816 = User stack of HS Task class destroyed
6817 = Supervisor stack of HS Task class destroyed
6818 = Stack overrun caused by exit program
6819 = Supervisor stack for task class in ExitUP destroyed
7000 = Error looking for boot module sync bytes.
7001 = Error searching the table of contents module.
7002 = Module not found during boot
7003 = Text not present.
7004 = Checksum of both anchors is wrong
7006 = Incorrect Checksum of the PSOS- Node-ConfTab
7007 = PSOS-Module not found or incorrect checksum
7008 = PROBE-Module not found or incorrect checksum
7009 = Module $$probeIO not found
7010 = Warm restart: Incorrect base management table checksum.
7012 = Im Init: CS of the configuration module is incorrect
7015 = HW-Traplib was not found
7016 = SYS-Traplib was not found
7017 = Install trap library not found
7018 = Configuration module not found
7019 = No valid VC Runtime version is set.
7020 = Startup module not found.
7022 = The CS of the error module was destroyed
7023 = Fatal operating system error
7024 = The check sum 1. contents was destroyed
7025 = Operating system cannot be started
7027 = AR Plug&Play: Device missing (PhysDeviceName)
7028 = AR Plug&Play: SRAM length too large (/LEN)
7029 = AR Plug&Play: InaNode in XML-section overwritten with HW-nodenumber
7030 = MemCard: MemCard no longer found, automatic cold restart.
7031 = MemCard: No SRAM Type
7032 = MemCard: No Flash Type
7033 = MemCard: Incorrect Manufacturer-ID
7034 = MemCard: Write protect active
7035 = MemCard: New MemCard inserted, automatic cold start
7036 = MemCard without attribute memory not supported
7050 = Undefined error.
7060 = Cannot find font module.
7070 = Invalid key matrix.
7080 = Function not supported.
7090 = Invalid parameters.
7101 = Illegal boot-up reason
7102 = Checksum of the contents in user RAM 1 is corrupted
7104 = Checksum of the contents in user RAM 1 is corrupted
7108 = MP: Handshake with the main CPU doesn't work. No RECONFIG
7110 = No access.
7111 = No warm start after DIAGNOSE possible, cold start carried out
7120 = Buffer overrun.
7121 = Processor global analog data area on PP with module address 1 too small
7122 = Processor global analog data area on PP with module address 2 too small
7123 = Processor global analog data area on PP with module address 3 too small
7124 = Processor global analog data area on PP with module address 4 too small
7125 = Processor global analog data area on PP with module address 5 too small
7126 = Processor global analog data area on PP with module address 6 too small
7127 = Processor global analog data area on PP with module address 7 too small
7128 = Processor global analog data area on PP with module address 8 too small
7129 = Processor global analog data area on PP with module address 9 too small
7130 = No connection.
7131 = Processor global analog data area on PP with module address 11 too small
7132 = Processor global analog data area on PP with module address 12 too small
7133 = Processor global analog data area on PP with module address 13 too small
7134 = Processor global analog data area on PP with module address 14 too small
7135 = Processor global analog data area on PP with module address 15 too small
7136 = Processor global analog data area on PP with module address 16 too small
7140 = Timeout
7141 = Processor global digital data area on PP with module address 1 too small
7142 = Processor global digital data area on PP with module address 2 too small
7143 = Processor global digital data area on PP with module address 3 too small
7144 = Processor global digital data area on PP with module address 4 too small
7145 = Processor global digital data area on PP with module address 5 too small
7146 = Processor global digital data area on PP with module address 6 too small
7147 = Processor global digital data area on PP with module address 7 too small
7148 = Processor global digital data area on PP with module address 8 too small
7149 = Processor global digital data area on PP with module address 9 too small
7150 = Incorrect parameter.
7151 = Processor global digital data area on PP with module address 11 too small
7152 = Processor global digital data area on PP with module address 12 too small
7153 = Processor global digital data area on PP with module address 13 too small
7154 = Processor global digital data area on PP with module address 14 too small
7155 = Processor global digital data area on PP with module address 15 too small
7156 = Processor global digital data area on PP with module address 16 too small
7195 = No data available
7401 = WARNING: PLC Reset: Warm start using keys or key switch
7402 = WARNING: PLC Reset: Cold start usig keys
7404 = WARNING: PLC Reset: Reset/Halt using keys or key switch
7408 = WARNING: PLC Reset: Reconfig using keys
7411 = WARNING: PLC Reset: Warm start using SYS_reset FBK
7412 = WARNING: PLC Reset: Cold start using SYS_reset FBK
7414 = WARNING: PLC Reset: Reset/Halt using SYS_reset FBK
7418 = WARNING: PLC Reset: Reconfig using SYS_reset FBK
7421 = Warning: PLC reset: Warm restart via communication
7422 = Warning: PLC reset: Cold restart via communication
7424 = Warning: PLC reset: Reset/Halt via communication
7426 = WARNING: PLC Reset: Warm start of PP during system boot
7427 = WARNING: PLC Reset: Cold start of PP during system boot
7428 = Warning: PLC reset: Reconfig via communication
7429 = WARNING: PLC Reset: Reset/Halt of PP during system boot
7432 = WARNING: PLC Reset: Diagnose using keys
7433 = WARNING: PLC Reset: Reconfig of PP during system boot
7442 = WARNING: PLC Reset: Diagnose using SYS_reset FBK
7452 = Warning: PLC reset: Diagnostics via communication
7457 = WARNING: PLC Reset: Diagnose of PP during system boot
7464 = WARNING: PLC Reset: Error mode using keys
7474 = WARNING: PLC Reset: Error mode using SYS_reset FBK
7484 = Warning: PLC reset: Error mode via communication
7489 = WARNING: PLC Reset: Error mode of PP during system boot
7490 = ARUPDATE: No ARUpdate module or modulesection with incorrect modules
7491 = ARUPDATE: No ARUpdate section
7492 = ARUPDATE: ARUpdate sections missing
7493 = ARUPDATE: file creation error
7494 = ARUPDATE: wrong systemmodule path on target
7495 = ARUPDATE: clear memory failed
7497 = PCCSW-Update: systemflash too small
7498 = WARNING: PLC Reset: Warm start not supported -> local cold start
7499 = WARNING: PCCSW Update made
7500 = Incorrect Identifier
7501 = OP Ctrl not connected
7502 = Cannot wait for GETKEY
7503 = General error flag
7504 = No communication to the selected OP
7505 = Impossible Window
7506 = RAM-Error
7507 = ROM-Error
7508 = Display not connected
7509 = Incorrect Display
7510 = Incorrect Configuration
7511 = Keyboard is defect
7512 = Impossible wait time repeat mode
7513 = Impossible repeat frequence
7514 = Blinking character outside the window
7550 = KeyPad is not available
7551 = BT_LIB: incorrect node for Genius device driver
7552 = BT_LIB: Error on GENI Board
7560 = BT_LIB: no tongle for AB driver
7570 = BT-Interpreter: Too many PV's in one PICTURE
7571 = BT-Interpreter: Text module not available
7572 = BT-Interpreter: Bitmaps parameters set but module not available
7573 = BT-Interpreter: Buffer for printer too small
7600 = Incorrect number of panels in config module
7601 = Incorrect name in config module
7602 = Incorrect device name in config module
7603 = Incorrect device type in config module
7604 = Incorrect display number in config module
7605 = Incorrect number of keys in config module
7606 = Incorrect number of lines in config module
7607 = Incorrect number of lines in config module
7608 = Incorrect number of pictures in config module
7609 = Incorrect version name in config module
7650 = BTSERV C200 : Error with EV_receive
7651 = BTSERV C200 : Key buffer empty
7700 = RECIPE: No recipe data object found in Flash
7701 = RECIPE: Not enough recipe RAM available
7702 = RECIPE: No recipe data object found in Flash
7703 = RECIPE: Index error in recipe data interface
7704 = RECIPE: Error writing in the recipe data object
7705 = RECIPE: Internal recipe status PV missing
7706 = RECIPE: Incorrect path
7707 = RECIPE: Recipe element not found in module
7801 = Invalid line number: 0 or larger as the number of lines on the display
7802 = Invalid column number: 0 or larger as column number of the display
7803 = Text length too long: Characters output up to the maximum displayable column -- remaining characters are cut off
7804 = Invalid attribute
7805 = Invalid font size specified or in the wrong position
7806 = Invalid position
7807 = Invalid direction specified
7808 = object too large; the object (bar, rectangle or graphic) does not fit on the specified position
7809 = Invalid number of places or the field does not fit on the display
7810 = Display not a graphics display -- object (bar, rectangle, or graphic) not possible
7811 = ESC sequence in the string - nothing output
7812 = Maximum number (32) of objects (rectangles) exceeded
7813 = Maximum number (32) of objects (bars) exceeded
7814 = Only one input field can be active.
7815 = No data object specified for the key definition
7816 = Specified data object not found
7817 = The number of key modules defined is smaller than the number of connected key modules.
7818 = The number of defined keys is not a multiple of 16 UINTs.
7819 = Invalid key code specified
7821 = The number of key modules was changed during operation
7822 = Invalid mode specified
7823 = Invalid number of decimal places
7825 = Invalid mode specified
7826 = Invalid time specified
7980 = PV Inconsistency: Descriptors do not match
7981 = PV Inconsistency: Byte lengths do not match
7982 = PV Inconsistency: I/O Types do not match
7983 = PV Inconsistency: Offset overlap
7984 = PV Inconsistency: I/O doublke definitions do not match
7985 = PV Inconsistency: Different IO Module
7986 = PV Inconsistency: Referenced IO Module not available
7987 = PV Inconsistency: No Hardware configuration, load new IO Library
7988 = PV Inconsistency: No identical IO-PV found
7989 = PV Inconsistency: Data types do not match
8001 = Attempt to install a PLC task for an unconfigured task class
8002 = The stack requirements of the PLC task exceed the total reserved for its task class stack
8003 = The requested cycle time of the PLC task is less than the cycle time of the associated task class
8004 = The analog data area requested by the PLC task is larger than the analog data area of the its task class.
8005 = The TC global digital data area is larger than the configured area of the corresponding task class
8006 = Error allocating memory
8007 = No more room in the system table
8008 = The requested I/O data length by the PLC task is too large. As reference the I/O data length of the 1st installed PLC task is valid
8009 = Install Status of a B&R Module is wrong
8010 = Pointer does not point to a valid object
8011 = Deinstall a running PLC task
8012 = A PLC task requested a global analog data area that is larger than the entire task class
8013 = A PLC task requested a global digital data area that is larger than the entire task class
8014 = Number of PLCIO types is configured too small for task classes
8015 = Incorrect module type installing a system task or user task
8016 = PP not present
8017 = Variable PB-IX not configured
8018 = IRQ-Task not supported by 2005 systems
8019 = IRQ-Task not supported by 2005 systems
8020 = B&R module checksum is wrong
8021 = The B&R Module already exists in the system
8022 = Module table full
8023 = Pointer does not point to a B&R Module
8024 = 2010-CPU-Version can't handle I/O-interrupts
8025 = No packed bit area available
8026 = Init values for dynamic PVs not supported
8027 = Incorrect PP type at given module address or PP Number
8028 = Wrong PV initialisation format
8030 = Trap number not implemented
8031 = The B&R module type is not defined for a trap install
8032 = The hardware trap library version does not match the CPU version
8033 = Too many expansion trap libraries installed
8034 = Version Inconsistency BURTRAP.br
8035 = Function only supported on a PP
8036 = Volatile global memory configuration too small.
8037 = Variable memory conflict - too less global memory configured.
8040 = An AVT Library with the same name already exists
8041 = Not enough AVT entries configured (PLCSWCFG)
8045 = The version number of the configuration module does not match the current version number
8046 = No valid type ??
8047 = SYSCONF module for wrong CPU type not accepted
8048 = Wrong INSTALL-Mode
8049 = Arcfg module already exists
8050 = Debug task for Interrupt task class or Exception task class
8052 = The I/O controller type requested by the PLC task doesn't exist
8054 = The I/O controller type requested by the PLC task doesn't exist
8056 = Invalid IO-Controller-ID
8060 = Attempt to install a handler for an interrupt for a non-existant system bus module
8062 = Installing the Process Variable Table
8063 = Shovel processor does not exist
8069 = No Device entry in pSOS table
8070 = Incorrect configuration for device
8071 = Buffer not available
8072 = Invalid buffer rejected
8073 = Invalid I/O control code
8074 = Specified device does not exist or BASIC FRAME driver for IF050/IF060 not loaded.
8075 = The System manager does not command the RIO-Master
8076 = IF050: Device requires too much internal memory
8077 = Not enough internal memory
8078 = Send buffer waiting queue full
8079 = Frame buffer with defective character
8080 = RIO Master has not finished configuring the instruction list.
8081 = Error during I/O Transfer to the remote station.
8082 = Error during Init Remote IO. The RIO master is not at the given module address
8083 = RIO in this HS-Task classes is not valid
8084 = RIO First initialization not complete after 40 seconds
8085 = RIO memory management in boot cannot be initialized
8090 = RIO Master has not completed output copying
8092 = Interrrupt task or Exception task is not allowed for the Debugger
8093 = SYSCONF module: No entry for task (priority)
8095 = Error in Config.Module HS section does not match the RK section
8096 = Max. number of interrupt tasks exceeded
8097 = More than 1 Exception task class configured
8098 = Exception Task with this number already exists
8099 = Installation failure
8100 = Deleteing a B&R-Module: No PI Object exists for this module
8101 = Ptr Error while deleting a B&R-Module
8111 = Ptr Error whil deleting a system task
8112 = System task has not been stopped before deletion
8115 = Ptr Error while deleting a user task
8116 = User task has not been stopped before deletion
8120 = There is still an active reference to the AVT Module while deleting (linkcnt != 0)
8121 = Ptr Error while deleting an AVT Library Module
8130 = PLC Task Update: Update not possible in Flash
8131 = PLC Task Update: Update not possible in FIXRAM
8132 = PLC Task Update: Different IO Definition
8133 = PLC Task Update: Different IO Definition
8134 = PLC Task Update: Different Data types
8135 = PLC Task Update: Different IO-amount
8136 = PLC Task Update: Different Task class
8137 = PLC Task Update: Different order number / exception number
8138 = PLC Task Update: Different PP amount
8139 = PLC Task Update: Different System bus module amount (PP)
8140 = PLC Task Update: Different AVT amount (AVT-FBK)
8141 = PLC Task Update: Different AVT entry (AVT-FBK)
8142 = PLC Task Update: Different local Variable
8143 = PLC Task Update: Different global Variable
8144 = PLC Task Update: Update function not available (UPDATE.BR)
8145 = PLC Task Update: No PV entry available
8150 = ID is not in a table
8151 = Code for Error Message
8152 = Warning: return from _NONCYLIC function --> called _EXIT
8160 = There is no free I/O timer
8161 = The given I/O timer value is wrong
8162 = Unknown I/O timer distributor
8169 = I/O timer not supported on this HW
8205 = Object pointer for starting a System/User Task is invalid
8206 = No enough memory configured (MEMCL_OS/MEMCL_SPSSW) when starting a task
8210 = Faulty buffer.
8250 = Transfer is active during Read Timeout
8251 = Device not open
8252 = Device not found
8253 = Syntax error in mode parameter string, or mode parameter not supported by the specified device.
8254 = Too many devices opened at once
8255 = Operating system version too low
8256 = Specify /PA, /DB, and /SB together.
8257 = I/O control command not supported.
8258 = Internal resources cannot be assigned.
8300 = RIO Exception : No error entered
8301 = RIO Exception : Master Error
8302 = RIO Exception : Slave Error
8400 = RIO Exception, RIO exception task for evaluation necessary
8401 = RIO Exception : Wrong block number
8402 = RIO Exception : Unknown command
8403 = RIO Exception : Input already configured
8404 = RIO Exception : Shovel table is too long
8405 = RIO Exception : Input configuration with output task
8406 = RIO Exception : Configuration with status access
8407 = RIO Exception : Module address too high
8408 = RIO Exception : Internal Address too high
8409 = RIO Exception : Block already configured
8412 = RIO Exception : Offset in Frame inconsistent to Bit shovel entry
8413 = RIO Exception : Output already configured
8414 = RIO Exception : Error not repairable, despite multiple repeats
8415 = RIO Exception : Faulty offset with LDFW command
8416 = RIO Exception : Block on slave not configured
8417 = RIO Exception : 2003 Analog access with odd number of bytes
8418 = RIO Exception : 2003 Digital access with length> 1 or offset> 0
8419 = RIO Exception : 2003 Digital access with incorrect data direction In/Out
8432 = RIO Exception : Error accessing an input module
8448 = RIO Exception : Error accessing an output module
8451 = RIO Exception : Invalid slave number configured
8452 = RIO Exception : Shovel offsets do not suit or overlap
8453 = RIO Exception : Block contains no data
8454 = RIO Exception : Block number for slave too large
8455 = RIO Exception : Block configured without Input or Output
8456 = RIO Exception : Too many instruction lists configured
8457 = RIO Exception : Copy Puffer overflow
8458 = RIO Exception : Frame Puffer overflow
8459 = RIO Exception : No task list available
8464 = RIO Exception : Number of shovel entries for a block too high
8500 = RIO Exception : Slave does not report during configuration
8501 = RIO Exception : Slave address invalid (0 or too large)
8502 = RIO Exception : Error on slave
8503 = RIO Exception : Slave does not report despite multiple repeats
8528 = RIO Exception : Error during IO access of a slave
8551 = RIO Exception : Invalid slot number
8552 = RIO Exception : System bus module is not RIO Master
8553 = RIO Exception : RIO Master Module version too low (<3.0)
8554 = RIO Exception : Response of the Slave does not match Request
8555 = RIO Exception : Incorrect command
8556 = RIO Exception : Unknown command for response (internal)
8557 = RIO Exception : Given data length too small
8558 = RIO Exception : Number of write entries too large
8559 = RIO Exception : Length of write data is too large
8560 = RIO Exception : Error accessing input module
8561 = RIO Exception : First entry in the CFG Table was NULL
8562 = RIO Exception : Incorrect LIFE List length
8563 = RIO Exception : Incorrect master version
8565 = RIO Exception : Invalid module address
8567 = RIO Exception : Input data length does not match master configuration
8568 = RIO Exception : Output data length does not match master configuration
8570 = RIO Exception : Error 1 when loading the RIO ISL Firmware
8571 = RIO Exception : Error 2 when loading the RIO ISL Firmware
8572 = RIO Exception : Error 3 when loading the RIO ISL Firmware
8574 = RIO Exception : RIO Master not configured as intelligent slave
8576 = RIO Exception : Error accessing output module
8580 = RIO Exception : IN FBK: Priority != 0 given
8581 = RIO Exception : IN FBK: inptr = NULL
8585 = RIO Exception : OUT FBK: Priority != 0 given
8586 = RIO Exception : OUT FBK: outptr = NULL
8587 = RIO Exception : RIO Slave not in RUN Mode
8591 = RIO Exception : ISL Input Status: No valid input data available
8592 = RIO Exception : Incorrect output data length on slave
8596 = RIO Exception : Incorrect priority for ISL Output Status
8597 = RIO Exception : Incorrect DPR_Address
8598 = RIO Exception : Incorrect configuration length
8599 = RIO Exception : Incorrect system bus module number
8600 = RIO Exception : No valid command
8601 = RIO Exception : Invalid configuration pointer
8602 = RIO Exception : Invalid Data pointer
8603 = RIO Exception : RIO-START -> incorrect state
8604 = RIO Exception : Incorrect data length
8605 = RIO Exception : No valid IO given
8606 = RIO Exception : TAB Buffer too small
8607 = RIO Exception : Copy buffer too small
8608 = RIO Exception : Slave address too high
8609 = RIO Exception : Length of empty entry too large
8610 = RIO Exception : Data buffer too small
8611 = RIO Exception : RIO already running
8612 = RIO Exception : RIO not configured
8613 = RIO Exception : Incorrect parameter pointer
8614 = RIO Exception : Incorrect parameter length
8615 = RIO Exception : RIO not configured or not started
8617 = RIO Exception : Incorrect Parameter ID
8618 = RIO Exception : Incorrect table pointer
8619 = RIO Exception : Incorrect length
8620 = RIO Exception : Invalid mode
8621 = RIO Exception : Incorrect slave status
8622 = RIO Exception : Incorrect mode
8623 = RIO Exception : Incorrect bit address
8627 = RIO Exception : IO module address not possible
8628 = RIO Exception : Response from wrong slave
8631 = RIO-Exception : Task can presently not be carried out
8632 = RIO Exception : No IO Module availabel(or Bus end)
8633 = RIO Exception : IO Bus end reached
8660 = RIO Warning: Library / Trap provided twice
8800 = Not enough communication objects (COBs) as specified in CANopen() and CANMulOpen() (increase cob_no ). CANexcep(): Invalid exception number exc_no. Valid range: 208 - 223. CANdftab(): Parameter table_adr=NULL
8801 = Not enough memory available for resources.
8802 = Wrong identifier
8803 = Communication objects (COBs) identifier is already being used in the system.
8804 = Wrong CAN identifier
8805 = Incorrect user identifier us_ident passed along
8806 = A COB with the specified CAN identifier has already been defined in the system
8807 = CAN: False CAN identifier definition
8808 = COB Management (FBK memory) destroyed
8809 = CAN operation with the same CAN identifier is busy
8810 = Send queue full
8811 = CAN bus is BusOff.
8812 = No more buffer available in the CAN controller (full CAN controller, e.g. Intel 82527)
8813 = CAN driver not installed
8814 = Invalid data length for CAN data
8815 = Baud rate not allowed
8816 = Illegal number of COB
8817 = Specified CAN controller not found
8818 = Error analyzing hardware
8819 = Error in interrupt handling
8820 = Function not supported
8821 = user_typ in CMSinit() incorrect
8822 = CMS object incorrectly defined
8823 = CMSinit(): Invalid CMS structure
8824 = Incorrect value for cms_mode transferred to the CMSmain() function
8825 = Node number cannot be read
8826 = An invalid parameter has been transferred (NULL)
8827 = Internal management is destroyed in the interrupt handler
8828 = Abort protocol sent
8829 = Abort protocol has been received from the client
8830 = Incorrect FBCAN handle
8831 = Conflict with standard/extended mode (11 or 29-bit CAN identifiers)
8832 = CMS multiplexer definition error
8833 = Dynamic variables not supported
8834 = CAN identifier mode configured differently (11-bit / 29-bit).
8837 = INA2000 CAN: COB not defined
8838 = INA2000 CAN: Node number too large
8839 = INA2000 CAN: Incorrect handle
8840 = INA2000 CAN: No Rx buffer free
8841 = Warning: CAN: Stuff error -> CAN ID collision / baud rate
8842 = Warning: CAN: Form error
8843 = Warning: CAN: ACK error - No acknowledge from other nodes
8844 = Warning: CAN: Bit1 send error (recessive bit)
8845 = Warning: CAN: Bit0 send error (dominant bit)
8846 = Warning: CAN: CRC checksum error
8850 = CAN CCI error: Object number not within value range
8851 = CAN CCI: Error
8852 = CAN CCI error
8853 = CAN CCI error
8854 = CAN CCI error
8855 = CAN CCI error (SG3)
8856 = CAN CCI error (SG3)
8857 = CAN CCI error (SG3)
8858 = CAN CCI error (SG3)
8859 = CAN CCI error (SG3)
8860 = CAN CCI error
8861 = CAN CCI error
8862 = CAN CCI error
8863 = CAN CCI error (SG3)
8864 = CAN CCI error (SG3)
8865 = CAN CCI error (SG3)
8866 = CAN CCI error (SG3)
8867 = CAN CCI error
8868 = CAN CCI error
8869 = CAN CCI error
8870 = CAN CCI error
8871 = CAN CCI error (SG3)
8872 = CAN message overwritten
8873 = CAN CCI error (SG3)
8874 = CAN CCI error
8875 = CANread() error
8876 = Send buffer is not free
8877 = CANread(): No current data available for the specified CAN identifier.
8900 = CANIOMAN: Error in data object CANIOTAB
8901 = CANIOMAN: Not enough User memory available
8902 = CANIOMAN: Incorrect Handle
8903 = CANIOMAN: Timeout Table full
8904 = CANIOMAN: No pSOS-Timer free
8905 = CANIOMAN: No entry found
8906 = CANIOMAN: Invalid node number
8907 = CANIOMAN: CANIOMAN not there
8910 = CANIOMAN: Alarm
8911 = CANIOMAN: Incorrect data type (length) for a PV
8912 = CANIOMAN: No CANIOTAB available
8913 = CANIOMAN: Error in data object CANIOTAB-Node
8914 = CANIOMAN: Error in data object CANIOTAB-IO
8915 = CANIOMAN: Incorrect data type for command PV (Bytearray[8])
8916 = CANIOMAN: Incorrect data type (length) for Trigger-Command-PV
8917 = CANIOMAN: PV empty string in CANIOTAB
8949 = CANIO-Master: No CANIO configured
8950 = CANIO-Master: PP with configured CANIO not available
8951 = CANIO-Master: Reference from CANIO to another PP not possible on PP
8952 = CANIO-Master: Incnsistent CANIO data length
8953 = CANIO-Master: Maximum 32 nodes on a CAN-BUS
8954 = CANIO-Master: IRQ/EXC/Debug Task class not supported
8955 = Bus is not configured.
8956 = Node is not configured
8957 = CANIO-Master: Baudrate not supported
8958 = CANIO-Master: Internal error for CAN_open
8960 = CANIO-Master: Internal error for Output copy
8961 = CANIO-Master: Internal error for Input copy
8962 = CANIO-Master: PP with configured CANIO not available
8963 = CANIO-Master: Reference from CANIO on another PP not possible on PP
8964 = CANIO-Master: CAN-BUS used is not configured on PP
8965 = CANIO-Master: CAN nodes is is not configured on PP
8966 = CANIO-Master: Internal error for COB delete
8967 = CANIO-Master: Internal error for delete
8968 = CANIO-Master: Internal error when deleting a PLC Task
8969 = CANIO-Master: Internal error for delete (Node counter)
8972 = CANIO-Master: Timeout for PP handling
8973 = CANIO-Master: CAN interface used already set for CANIO
8974 = CANIO-Master: Internal error when installing a PLC Task
8975 = CANIO-Master: Internal error when installing (Anker)
8976 = No CANIO application installed on the PP.
8977 = CANIO-Master not available on PP (FBK)
8978 = No CANIO application has been installed locally for this node.
8979 = Node is not active.
8980 = CANIO-Master: Status area not supported
8981 = CANIO-Master Exception
8982 = CANIO-Master: EXERMO Version to small
8983 = CANIO-Master not available on PP
8985 = Timeout
9001 = No more space in CSwrite table
9002 = Invalid module name syntax (special character)
9003 = The end of the MSPS region in the Config.Module is incorrectly set
9004 = The given shovel table is empty
9005 = The I/O instruction has not been executed yet
9006 = Incorrect SAP in the SAPLI_TAB (SAP_check_rights)
9008 = The checksum of a Continuous IVZ is destroyed
9009 = Checksumm length not equal to 4 is not supported
9010 = Function pointer not initialized
9011 = B&R String too large
9050 = TC#5 Cycle time error
9051 = TC#6 Cycle time error
9052 = TC#7 Cycle time error
9053 = TC#8 Cycle time error
9060 = TC#5 maximum cycle time violation
9061 = TC#6 maximum cycle time violation
9062 = TC#7 maximum cycle time violation
9063 = TC#8 maximum cycle time violation
9098 = I/O cross-link task cycle time violation
9099 = Task class "idle time generator" cycle time violation
9100 = EXCEPTION: Bus error
9101 = EXCEPTION: Address error
9102 = EXCEPTION: Illegal Instruction
9103 = EXCEPTION: Privilege Violation
9104 = EXCEPTION: Division by zero
9105 = EXCEPTION: Spurious Interrupt
9106 = EXCEPTION: Unimplemented Instruction
9107 = EXCEPTION: Uninitialized Interrupt
9108 = EXCEPTION: Format Error Stack frame
9109 = EXCEPTION: Automation Studio Assertion failed
9110 = EXCEPTION: Perieller Error
9111 = EXCEPTION: Perieller Error
9112 = HS#1 cycle time error
9113 = HS#2 cycle time error
9114 = HS#3 cycle time error
9115 = HS#4 cycle time error
9116 = HS#1 maximum cycle time violation
9117 = HS#2 maximum cycle time violation
9118 = HS#3 maximum cycle time violation
9119 = HS#4 maximum cycle time violation
9120 = TC#1 cycle time error
9121 = TC#2 cycle time error
9122 = TC#3 cycle time error
9123 = TC#4 cycle time error
9124 = TC#1 maximum cycle time violation
9125 = TC#2 maximum cycle time violation
9126 = TC#3 maximum cycle time violation
9127 = TC#4 maximum cycle time violation
9128 = EXCEPTION: NMI-Handler
9129 = Exception released by RIO-Master.
9130 = EXCEPTION: Default handler
9131 = IRQ-TC maximum cycle time violation
9132 = EXC-TC maximum cycle time violation
9133 = Null pointer
9134 = EXCEPTION: Range overflow in array
9135 = RIO HSTC maximun cycle time violation
9136 = I/O error 2003.
9137 = Exception handling with EXC-Tasks active more than once
9138 = EXCEPTION: Error 2003 IO (error for digital access)
9139 = EXCEPTION: Error 2003 IO (ANP not available)
9140 = EXCEPTION: Error 2003 IO (ANP inactive)
9141 = EXCEPTION: Error 2003 IO (ANP-Timeout)
9142 = EXCEPTION: Error 2003 IO (ANP-Type changed)
9143 = EXCEPTION: Unknown Error 2003 IO
9144 = ExceptionCallout: wrong connect-mode
9145 = ExceptionCallout: to many connects in parallel
9146 = WARNING: Buserror during communication
9147 = WARNING: Adresserror during communication
9150 = EXCEPTION: Error 2005 Base IO
9151 = EXCEPTION: Error 2005 IO expansion 1
9152 = EXCEPTION: Error 2005 IO expansion 2
9153 = EXCEPTION: Error 2005 IO expansion 3
9154 = EXCEPTION: Error 2005 IO expansion 4
9155 = EXCEPTION: Error 2005 IO expansion 5
9156 = EXCEPTION: Error 2005 IO expansion 6
9157 = EXCEPTION: Error 2005 IO expansion 7
9158 = EXCEPTION: Error 2005 IO expansion 8
9199 = Default-EXCEPTION-Handler
9200 = System halted because of power loss
9201 = Warning: Cold restart after powerfail
9202 = PLC reboot after pressing the reset button
9203 = PLC reboot due to internal CPU clock failure
9204 = PLC reboot triggered by the PLC CPU temperature monitor
9205 = PLC reboot due to internal reset controller error
9206 = PLC reboot triggered by the hardware watchdog
9207 = PLC reboot triggered by a software reset
9210 = Warning: Halt/service after watchdog or manual reset
9211 = Warning: Cold restart after watchdog or manual reset
9212 = Warning: Warm restart after watchdog or manual reset
9213 = WARNING: Error after Watchdog or manual RESET
9214 = Warning: Diagnostics after watchdog or manual reset
9215 = WARNING: Reconfig after Watchdog or manual RESET
9220 = Warning: Halt after powerfail
9221 = Warning: Cold restart after powerfail
9222 = Warning: Warm restart after powerfail
9223 = WARNING: Error after powerfail
9224 = Warning: Diagnostics after powerfail
9225 = Warning: Halt after software reset
9226 = Warning: Cold restart after software reset
9227 = Warning: Warm restart after software reset
9228 = ERR_SOFTWARERESET_ERROR
9229 = Warning: Diagnostics after software reset
9301 = INTELLIGENT MIXED MODULE: Not enough data for congfiguration
9302 = INTELLIGENT MIXED MODULE: Not enough memory for configuration
9303 = INTELLIGENT MIXED MODULE: The calibration factor is invalid
9304 = INTELLIGENT MIXED MODULE: The sampling rate is invalid
9430 = MEMCARD-Update: For Update with differnt mode, use PCCSW V2.10
9431 = MEMCARD-Update: Internal error collecting information
9432 = MEMCARD-Update: Internal error: MCUPDATE not existing
9433 = MEMCARD-Update: PCCSW main system not available
9435 = MEMCARD-Update: sep_end module not available
9436 = MEMCARD-Update: Error deleting USERROM
9437 = MEMCARD-Update: Error deleting SYSTEMROM
9438 = MEMCARD-Update: Error programming USERROM
9439 = MEMCARD-Update: Error programming SYSTEMROM
9440 = MEMCARD-Update: FIXRAM not configured
9441 = MEMCARD-Update: FIXRAM configured too small
9442 = MEMCARD-Update: USERROM too small for user rom module
9443 = MEMCARD-Update: SYSTEMROM too small for main system plus expansions
9444 = MEMCARD-Update: wrong CPU-type, no MemCard possible
9445 = MEMCARD-Update made
9452 = The specified module is not available
9453 = The specified slot on the module is not supported
9455 = The output data length exceeds the allowed area (255)
9456 = The input data length exceeds the allowed area (255)
9457 = No IF661 module available
9458 = L2DP does not have enough memory (reduce data length)
9460 = Output data pointer == ZERO and data length=0
9461 = Input data pointer == ZERO and data length=0
9462 = The LSX.SSY String is incorrect
9463 = Not yet in data transfer mode.
9464 = Incorrect slave status
9500 = PPMAN: General fatal error
9501 = PPMAN: Timeout in CPU PP boot handshake
9502 = PPMAN: Number of system bus modules configured too small
9503 = PPMAN: System boot in INIT mode not possible
9504 = PPMAN: Different AR Versions on CPU/PP
9510 = Incorrect PP_module address or no PP present
9511 = PPConnect called twice
9512 = Incorrect memory length
9513 = "ppdprlib.br" library not loaded on PP
9514 = Free memory error (incorrect pointer)
9515 = DPR length too long
9516 = Incorrect identifier (identifier = 0)
9600 = EXT-FUBs: old task still open
9601 = LVW_free: incorrect pointer
9602 = LVW_alloc/LVW_free: User bitmap defective
9603 = LVW_alloc/LVW_free: VW-Pointer changed
9604 = LVW_alloc: 1. Overflow
9620 = Profiler: This CPU is presently not supported
9621 = Profiler: Task list too small
9622 = Logging not running (Profiler not active)
9623 = Profiler: Different version AS Profiler - AR Profiler
9624 = Log buffer not set
9625 = Profiler: Logging already activated
9627 = Profiler: OS Task Switch Error
9628 = Profiler: Communication Error
9639 = Profiler: General error with AsProfiler
9650 = Library function not available (System GOT)
9651 = Not enough free memory for librarytable
9652 = Library function is still referenced, deletion failed
9653 = Library function is not referenced, unlink failed
9654 = Library function already exists (duplicated symbol)
9800 = Trap-Library not installed (RIO, ...)
9900 = BUGFIX: Incorrect PLCSW version or configuration problem (stack)
9999 = Function is not implemented.
10000 = Invalid identifier.
10001 = Error allocating memory
10002 = Max. number of IQ drivers have already been installed in the manager
10003 = Max. number of connections for this IQ driver already being used
10004 = IQ driver with the specified ID not found
10006 = Syntax for INAconnect for the "pPath" input invalid
10007 = IQ driver with the same ID already installed
10008 = Version conflict between INACLNT.BR (IQ management) and IQ driver
10020 = Error installing IQ driver
10021 = Error allocating memory
10022 = Incorrect input value in FBK
10023 = Wrong FBK input in PV list
10024 = Invalid access type
10025 = Incorrect connection state for this action
10026 = Incorrect link state for this action
10027 = Incorrect action state for this action (WORKING)
10028 = Different type for local and remote objects
10029 = Remote: Internal action error on the remote object
10030 = Local: Internal action error on the local object
10031 = Remote: PV/DO has invalid type
10032 = Local: PV has invalid type
10033 = Remote: dynamic PV is zero (not initialized)
10034 = Local: dynamic PV is zero (not initialized)
10035 = Remote: Object (PV or dyn. data object) does not exist
10036 = Local: object (PV) does not exist
10037 = Remote: Object type has changed.
10038 = Local: Object type has changed.
10039 = Warning: INAinfo FBK structure too small
10040 = Invalid identifier (c_ident , l_ident)
10041 = Max. number of connections for this IQ driver already in use
10042 = Max. number of links to this connection already in use
10043 = No further entry found in the object manager
10049 = FBK not executed since the internal Instruction FIFO is full
10050 = Text management error
10100 = Error allocating memory
10101 = Invalid identifier
10102 = Max. number of connections already in use
10103 = Max. number of objects on this connection already in use
10104 = No (further) entry found in the object manager
10110 = Error in server state machine
10111 = error in request frame
10120 = Dynamic DO: Old version of Commserv.br in use
10121 = Dynamic DO: Dynamic data object manager has not been installed
10122 = Dynamic data object: Error allocating memory
10123 = Dynamic data object: Invalid identifier
10124 = Dynamic DO: Max. number of DOs already in use
10125 = Dynamic data object: Data object with the same name already exists
10126 = Dynamic data object: Size conflict when accessing data object.
10127 = Dynamic data object: FBK Call: Invalid inputs
10128 = Dynamic DO: Queue is full, write not possible
10129 = Dynamic DO: DO is empty, read not possible
10130 = Dynamic DO: DO is blocked, read/write not possible
10132 = dyn. DO: internal data buffer state error
10201 = Service not supported.
10202 = Status error in the state machine
10203 = unexpected telegram
10210 = Connection aborted
10211 = Commserv.br module not installed on the server station
10220 = DL: error from coder function
10221 = DL: error from decoder function
10222 = DL: default error
10223 = DL: aborted from user
10224 = DL: locked for user
10225 = DL: No BR module
10226 = DL: Defective BR module checksum
10227 = DL: BR module installation error
10228 = DL: BR-Module wrong length
10229 = DL: Not enough target memory available
10230 = DL: error during burning BR-Module
10231 = DL: no NC manager installed
10232 = DL: error from NC manager DL function
10240 = UL: error from coder funktion
10241 = UL: error from decoder function
10242 = UL: default error
10243 = UL: aborted from user
10244 = UL: Module doesn't exist (incorrect name)
10245 = UL: wrong object state
10246 = UL: upload module is locked
10247 = UL: locked for user
10500 = NC Manager: The INIT program was not called by ROOT task
10501 = NC Manager: Incompatible NC Managers existing
10502 = NC manager: HW specific NC list is invalid (contact B&R)
10503 = NC Manager: NC Manager module not found
10509 = NC Manager: NC functions cannot be entered in the AVT
10511 = NC Manager: Library 'IO_lib' not available
10512 = NC Manager: Library 'spooler' not available
10513 = NC Manager: Library 'io_lib' not burned before NC Manager
10514 = NC manager: Version of 'io_lib' not compatible with NC manager
10520 = NC Manager: Not enough User Memory for NC configuration list
10521 = NC Manager: User Memory for NC configuration list not freed
10522 = NC Manager: Not enough User Memory for NC SW
10523 = NC Manager: User Memory for NC SW not freed
10524 = NC Manager: Not enough DPR Memory for NC SW
10525 = NC Manager: DPR Memory for NC SW not freed
10530 = NC Manager: NC SW INIT aborted
10531 = NC Manager: NC module with incompatible HW version (mod.addr. in 'Binary Data')
10532 = NC Manager: Error with CPU_xinfo() (error code = 'Info')
10533 = NC Manager: Error with HS1-IR-Level change (error code in 'Binary Data')
10534 = NC Manager: Error with NC IRQ installation (error code in 'Binary Data')
10535 = NC Manager: NC module ID in system table is wrong (mod. addr. in 'Binary Data')
10540 = Both NC manager types existing ('*man' and '*_ms'), this is not allowed !
10550 = Read NC CFG module: NC manager error in 'Binary Data'
10551 = Read NC CFG module: Status for NC manager error in 'Binary Data'
10552 = Read NC CFG module: ID for NC manager error in 'Binary Data'
10560 = NC manager error (see 'ASCII Data')
10561 = NC manager info (see 'ASCII Data')
10580 = MC FUB Library: Error (see 'ASCII Data')
10581 = MC FUB Library: INIT aborted
10600 = Error during NC manager INIT (INFO in error records of NC object)
10650 = General NC configuration list not found
10651 = HW specific NC configuration list not found
10652 = No NC object available
10703 = NC object not found ('bus_typ','modul_adr','object_typ','channel')
10704 = ncalloc: Task class code invalid
10705 = ncalloc: System Manager module not found
10706 = ncalloc: INSTALL error for NC task for TC start (enough TC stack ?)
10707 = ncalloc: INSTALL error for NC task for TC end (enough TC stack ?)
10708 = ncalloc: Invalid flag combination
10709 = ncalloc: Invalid data length
10710 = Calling ncalloc() with these parameters is not allowed before the network initialization is completed
10711 = This NC object is already used by the MC library (PLCopen FBs for Motion Control)
10712 = The NC object is not enabled (channel number too high or no PDO data defined)
10713 = The NC object has already been initialized with other parameter values
10720 = Invalid NC function pointer
10721 = 'nc_object' is not a valid NC object
10722 = 'subject' is not defined or not allowed for this 'nc_object'
10723 = 'action' is not defined or not allowed for this 'subject'
10724 = TType of 'nc_object' is invalid
10725 = Type of data object is invalid
10726 = This NC action is blocked because the initialization of the corresponding NC object is not yet completed or was aborted due to an error.
10727 = Invalid Index
10728 = Invalid node number or version number
10729 = The data address is zero
10730 = ID of object or handle is zero
10731 = Invalid NC object data
10732 = The specified size of parameter data is invalid for this action
10733 = Invalid network state to carry out this function
10734 = The NC object does not belong to a network type, for which this function is supported
10735 = The length of the corresponding network data is invalid
10740 = 'nc_object' is not an NC object with type 'ncCNCSYS'
10741 = CNC -> PLC: M function not within the defined range
10742 = CNC -> PLC: M_S function not within the defined range
10743 = 'nc_object' is an NC object of an NC software that is not supported by this function
10750 = 'rec_index' invalid (<0 or too large)
10751 = 'nc_obj_ax1' is not a valid NC object
10752 = 'nc_obj_ax2' is not a valid NC object
10753 = 'nc_obj_ax1' is not an NC object with type 'ncAXIS' or 'ncV_AXIS'
10754 = 'nc_obj_ax2' is not an NC object with type 'ncAXIS' or 'ncV_AXIS'
10755 = 'nc_obj_ax1' is an NC object of an NC software that is not supported by this function
10756 = 'nc_obj_ax2' is an NC object of an NC software that is not supported by this function
10757 = 'nc_obj_ax1' and 'nc_obj_ax2' have different HW types
10760 = AR functions are not available, which are needed to carry out this function
10900 = NC Link Task not compatible to NC Manager
10901 = NC Link Task: Not enough User Memory to Test NC Objects
10902 = NC Link Task: User Memory to Test NC Objects not freed
10903 = NC Link Task: System Manager module not found
10904 = NC Link Task: INSTALL error for NC task for TC start (enough TC stack ?)
10905 = NC Link Task: INSTALL error for NC task for TC end (enough TC stack ?)
10906 = NC Link Task: Error sending a result to the NC Manager
10910 = NC Link Task: NC Object not in test operation
10911 = NC Link Task: No free Test NC Object
10912 = NC Link Task: NC Object is no Test NC Object
10940 = NC system download: NC manager error in 'Binary Data'
10941 = NC system download: NC module error in 'Binary Data'
10942 = NC system download: Status for NC module error in 'Binary Data'
10943 = NC system download: ID for NC module error in 'Binary Data'
10950 = NC System Download: Incompatible NC Managers existing
10951 = NC Manager: Error for AVT_update() for NC System Download
10952 = NC System Download: Error for AVT_search()
10953 = NC System Download: An NC System Download is already active
10954 = NC System Download: General NC configuration list not found
10955 = NC System Download: HW specific NC configuration list not found
10956 = NC System Download: Pointer for download function is not valid
10957 = NC System Download: No NC module available for this HW type
10958 = NC System Download: NC module RESET not possible (BOOT function existing ?)
10959 = NC System Download: Timeout for NC Module after RESET (BsLoader)
10960 = NC System Download: Timeout for NC Module after RESET (BOOT)
10961 = NC System Download: Timeout for NC Module during OS download on
10962 = NC System Download: Timeout for NC Module during download
10963 = NC System Download: Timeout for NC Module during download completion (FPROM)
10964 = NC System Download: Download aborted by PLC
10965 = NC System Download: Error on NC module (module address = 'Info')
10966 = NC System Download: The HW type of the NC system could not be determined
10967 = NC system download: Download aborted by NC SW
10970 = NC System Download: Unknown BOOT command
10975 = NC System Download: Data block > 256 BYTEs
10976 = NC System Download: RAM end reached
10980 = NC System Download: Invalid checksum
10981 = NC System Download: Error deleting FPROM
10982 = NC system download: Error burning FPROM
10983 = NC System Download: NC system too large for FPROM
10990 = NC system download: Abort after error
10991 = NC System Download: Error for SS_write() (error code = 'Info')
10992 = NC System Download: Error for SS_write() (module address = 'Info')
11700 = I/O library: Specified I/O bus for IO_physdef is not supported
11701 = I/O library: Invalid offset for I/O_physdef
11702 = I/O library: Invalid data area for I/O_physdef
11703 = I/O library: Invalid mode for I/O_physdef
11704 = I/O library: SC entry at odd address for IO_physdef
11705 = I/O library: Invalid I/O module address for I/O_physdef
11706 = I/O library: Current CPU type is not supported by IO_physdef.
11710 = I/O library: PV not found for IO_define.
11711 = I/O library: PV length error (IO_define)
11712 = I/O library: Unsupported PV type for IO_define
11713 = I/O library: PV without shovel instruction for IO_define.
11714 = I/O library: Only analog PVs permitted for IO_define
11715 = I/O library: No PV name for IO_define.
11716 = Timeout during shovel instruction (fatal error).
11717 = Invalid I/O identifier.
11720 = I/O library: Incorrect Ident for IO_combine
11721 = I/O library: Too many entries for IO_combine
11722 = I/O library: SC table at odd address for IO_combine
12000 = Warning: basetime is more than 32767 greater than the last time the FBK was called. The difference dt is limited to this value
12001 = Warning: The integral element of the actuator signal has reached its maximum limit
12002 = Warning: The integral element of the actuator signal has reached its minimum limit
12003 = Warning: Input Y exceeds the value range defined with Y_max and Y_min while being limited to this range.
12004 = Warning: The cycle time in which the function block LCPIDTune() or LCRPIDTune() is called is too long.
12005 = Warning: T1 or T2 or both parameters were set to zero.
12006 = Warning: xstart is within the hysteresis
12007 = Warning: A time parameter of the FBK LCDifferentiate() or LCRDifferentiate() is smaller than 4 times the actual cycle time.
12008 = Warning: Input A exceeds the value range defined with Y_max and Y_min while being limited to this range.
12009 = Warning: Input Y_man exceeds the value range defined with Y_max and Y_min while being limited to this range.
12010 = Warning: T1 value entered is not larger than the corresponding task cycle time.
12012 = Warning: T2 = 0. The intended PT2 functionality is reduced to simply PT1 functionality, if T1 > 0. If T1 should also equal 0, then the PT2 element degenerates to a true P-element.
12013 = Warning: T2 value entered is not larger than the corresponding task cycle time.
12015 = Warning: Tt = 0. The intended dead-time behavior is reduced to an identical image.
12016 = Warning: Tt < dt
12017 = Warning: Tt was not entered as a whole number multiple of the cycle time.
12018 = Warning: An error occurred while allocating memory for the internal ring buffer. Tt was set to 0.
12019 = Warning: A change of the tuning mode is not possible and will be ignored.
12020 = Warning: Amplitude during oscillation attempt tuning is too low. Therefore, an additional switching hysteresis is used.
12021 = Warning: No turning point detected during heating.
12022 = Warning: Values that were not set or set incorrectly in the tuning settings were replaced by default values.
12023 = Warning: Not set or incorrectly set filter_base_T rounded up to a multiple of the task cycle time or set to the default value.
12024 = Warning: PID values that were not set or were set incorrectly were replaced by default values.
12025 = Invalid value for Kfbk 
12026 = Invalid value for Kp
12027 = Invalid value for Kw
12028 = Invalid value for Tf 
12029 = Invalid value for Tn.
12030 = Invalid value for Tv
12031 = Invalid value for t.
12032 = Invalid value for tminpulsInvalid value for t_min_pulse
12033 = tperiod is less than dt (cycle time of the function block call). t_period is less than dt (cycle time of the function block call).
12034 = LoopCont: Invalid value for tup or tdown. LoopConR: Invalid value for dy_up or dy_down.
12035 = Invalid value for t_change_up or t_change_down.
12036 = Invalid value for t_impulse
12037 = LoopCont: NOT (Y_max > Y_min) LoopConR: Y_max = Y_min OR Y_max > 100 OR Y_min < -100
12038 = Autotuning aborted.
12039 = LoopCont: Error calculating controller parameters. LoopConR: Error calculating controller parameters (see addInfo output).
12040 = Auto-tuning timeout.
12041 = Auto-tuning cancelled because the set value W was changed before state was able to take on the value LCPIDAUTOTUNE_STATE_FINISHED. Auto-tuning cancelled because the set value W was changed before state was able to take on the value LCPID_TUNE_STATE_FINISHED. Tuning aborted because W was changed before the state output was set to LCRPIDAUTOTUNE_STATE_FINISHED (50).
12042 = Tn or Tv is specified so large that a prescaler value cannot be calculated.
12043 = NOT(WX_max > WX_min)
12044 = deadband > (WX_max - WX_min)
12045 = NoOfPoints is not between or including 2 and 1000, or ptr_table is zero, or violation of the continuity rule found.
12046 = T1 < 0
12047 = T2 < 0
12048 = Tt < 0
12050 = IF361_frm_rdwr: Transmit frame too long
12051 = IF361_frm_rdwr: Got wrong pointer
12054 = IF361_frm_rdwr: Answer from IF361 was too short
12055 = IF361_frm_rdwr: no startsignal in answerframe
12056 = IF361_frm_rdwr: No answer from IF361 despite 15 retries
12057 = Setting baudrate on IF361 failed
12058 = Syntax error in device string
12059 = No pointer for output buffer outbuf
12060 = No pointer for input buffer inbuf
12061 = Output buffer length outlen to high>244
12062 = Input buffer length inlen to high>244
12063 = Wrong interface number in device string
12064 = Wrong subslot number in device string
12065 = Wrong Slot number in device-String
12066 = Wrong pointer for L2DPpara
12067 = Wrong baudrate for communication between CPU and IF361
12068 = No IF361 pluged in at given slot
12069 = Overall length of buffers too high inlen+outlen>340 bytes
12070 = Changing the baudrate requires restart of PLC
12071 = Wrong answer length from IF361 command
12072 = Configuration of master different
12073 = Conflicting parameters on master and slave
12076 = Slave is in offline mode
12077 = Watchdog for master triggered
12078 = Invalid Stationnumber
12079 = IF361 is prepairing data exchange mode
12080 = SPC3: Invalid command to SPC3
12081 = SPC3: Invalid parameter for SPC3
12082 = SPC3: Too less memory for configuration
12083 = SPC3: not switched to offline
12084 = SPC3: Invalid length for input buffer
12085 = SPC3: Invalid lenght for output buffer
12086 = SPC3: Invalid length for diagnostic data
12087 = SPC3: Invalid length for parameter data
12088 = SPC3: Invalid length for configuration
12090 = SPC3: Invalid number of bytes
12091 = SPC3: Invalid checksum
12092 = SPC3: Initialisation not correct
12093 = SPC3: Wrap around counter not correct
12094 = SPC3: Invalid byte count in command
12095 = SPC3: Error at clearing flash
12096 = SPC3: Error at programming flash
12097 = SPC3: Invalid destination address
12102 = Resource unavailable
12103 = Requested function of master is not activated within the slave
12104 = Task does not exist
12105 = Task is not initialised
12106 = The MCL is locked
12107 = The MCL rejects a send command because of an error
12109 = No answer-data, although the slave has to reponse with data
12117 = No response of the station
12118 = Master not into the logical token ring
12119 = Master not in offline configuration mode. Delete the data base within the DEVICE, else the DEVICE is not able to execute the download of the dataset file
12120 = The user will download a database into the device that is not valid for this device type.
12121 = Database segment not configured.
12122 = Error in <msg>.nr parameter – difference between <msg>.nr to the next not 1.
12123 = Attempt made to send more data than specified in the first message.
12124 = Sequence error.
12125 = Checksum error - calculated checksum does not match the checksum transferred in the first message.
12126 = Access protection while reading or writing database segment.
12127 = Download / Upload not allowed for specified segment name.
12129 = Bootstrap loader required to gain access to this segment, but no bootstrap loader on card.
12140 = Not an available command.
12141 = Unknown command.
12142 = Unknown command mode.
12143 = Error in command parameter.
12144 = ln parameter does not match expected length of command.
12150 = Flash currently being used.
12151 = Error deleting flash.
12152 = Error writing to flash.
12153 = Flash not configured.
12154 = Flash timeout.
12155 = Access to flash denied during delete procedure.
12157 = Sequence error.
12159 = Incompatible or incorrect data.
12162 = Invalid address range.
12163 = Data address and data length together caused overflow.
12165 = Invalid data counter.
12166 = Unknown data type.
12167 = Unknown function.
12180 = Send mailbox full. Mailbox must be deleted or read before a new message can be sent.
12181 = Internal error
12182 = No ident number for the device.
12183 = Specified ident number = 0.
12184 = Incorrect ident number specified.
12185 = No more available ident numbers for this device.
12186 = Specified memory size does not match device memory size.
12187 = Specified mode number does not exist.
12188 = Data length of configuration module incorrect.
12189 = Specified slave not configured.
12190 = Master not in "RUN" state.
12191 = The set handshake mode is not supported.
12192 = Cannot copy so much input data.
12193 = Cannot copy so much output data.
12195 = Incorrect device name.
12196 = Table number for the device search too large.
12197 = Could not find configuration module.
12198 = Corresponding device not found.
12199 = Device address incorrect.
12200 = Specified device not a fieldbus device.
12251 = Reserved / not used.
12252 = Reserved / not used.
12253 = Reserved / not used.
12254 = Reserved / not used.
12255 = Send or receive mailbox pointer = ZERO.
12256 = Device address pointer = ZERO.
12257 = Size parameter too large.
12258 = Parameter size is NULL.
12260 = Invalid value for the Size parameter.
12261 = Message buffer too small.
12262 = Null pointer access.
12263 = Invalid value for Mode parameter.
12264 = Invalid value for Number parameter.
12265 = Invalid value for InfoArea parameter.
12266 = Invalid device number.
12267 = I/O data cannot be read or written.
12268 = Device not yet initialized.
12269 = Unable to connect to device.
12270 = Device driver not loaded.
12273 = Unknown status mode.
12274 = DPM size different than configuration.
12275 = Function call failed.
12276 = Unknown I/O data exchange mode.
12277 = Timeout for I/O data exchange.
12278 = I/O data exchange failed.
12279 = COM flag not set.
12280 = Timeout for reset function.
12281 = No message present.
12282 = Timeout on GetMessage call.
12283 = Timeout on PutMessage call.
12284 = Send mailbox full.
12285 = Error in DPM flags
12286 = Incorrect OS version.
12287 = Watchdog test failed.
12288 = Device not in a run state.
12289 = Device not in a ready state.
12290 = Device DPM cannot be reached.
12291 = Incorrect message ident.
12292 = The init function block was called too often.
12293 = Invalid task ID.
12294 = Incompatible version.
12295 = Unknown parameter.
12296 = Command active on this channel.
12297 = Error in internal read state.
12298 = Error in internal init state.
12299 = Device not initialized.
14700 = Cannot parse process variable identifier.
14701 = Error number is not currently in use.
14702 = Cannot parse process variable identifier.
14703 = Cannot parse process variable identifier.
14704 = Cannot parse process variable identifier.
14710 = PV not found.
14711 = Module with specified identifier not found on target system
14712 = Error while checking the plausibility of the PV description on the target system.
14713 = Error while checking the plausibility of the PV description on the target system.
14714 = Error while checking the plausibility of the PV description on the target system.
14715 = Error while checking the plausibility of the PV description on the target system.
14716 = Buffer used to determine structure description too small
14717 = Error checking the plausibility of the indices describing the PV on the target (searching for the PV via index)
14800 = FBASE: Not enough memory for management
14801 = FBASE: No FBASE module available in system
14802 = FBASE: Slot not supported
14803 = FBASE: Function not implemented
14804 = FBASE: No frame received
14805 = FBASE: Transfer active
14806 = FBASE: Transmit frame length NULL
14807 = FBASE: All buffers used
14808 = A setting in the mode string (see mode parameter for the FRM_xopen() and FRM_mode() functions) not supported by the interface
14809 = FBASE: Option not supported
14810 = FBASE: Receive frame length too large
14811 = FBASE: Subslot not supported
14812 = FBASE: Interface not supported
14813 = Control wire to the interface is disconnected or not in use
14814 = Function not available (not implemented in the frame driver)
14815 = FBASE: invalid destination (destination not existing)
14820 = FBASE: No Client COB exists from FBASE_open
14821 = FBCAN: DefineCOB error for Initiate Request Write-COB
14822 = FBCAN: DefineCOB error for Initiate Request Read-COB
14823 = FBCAN: DefineCOB error for Initiate Response Write-COB
14824 = FBCAN: DefineCOB error for Initiate Response Read-COB
14825 = FBCAN: DefineCOB error for Data Segment Write-COB
14826 = FBCAN: DefineCOB error for Data Segment Read-COB
14827 = FBCAN: Receive Callback Overrun
14828 = FBASE: The cyclic system is no longer running
14829 = FBCAN: FBwrite for this connection still activated
14830 = FBASE: Invalid Node-Number
14831 = FBASE: Invalid source node number
14832 = FBASE: Invalid target node number
14833 = Source node number not unique.
14834 = FBASE: Target node number not unique.
14840 = FBPB: PROFIBUS-Module not existing
14841 = FBPB: incorrect transmitframe
14850 = FBASE: Function not implemented
14860 = Error in internal socket function RECVFROM of FBASE ethernet communication
14861 = Error in internal socket function NOFBVW of FBASE ethernet communication
14862 = Error in internal socket function SENDTO of FBASE ethernet communication
14863 = Error in internal socket function BIND of FBASE ethernet communication
14864 = Error in internal socket function SOCKET of FBASE ethernet communication
14865 = Error in internal socket function SETSOCKOPT of FBASE ethernet communication
14866 = Error in internal socket function GETHOSTADR of FBASE ethernet communication
14871 = TCPIPDRV: The configured gateway address is invalid
14872 = TCPIPDRV: Ethernet device not available
14875 = The Package could not be sent.
14876 = no valid packâge received
14877 = Too short option length
14878 = Option not found
14879 = The offert was rejected.
14880 = No send buffer available
14881 = Frame cannot be sent
14882 = Table for storing receive functions full
14883 = The renewal time ran off.
14884 = Status of the DHCP client
14885 = Lease timeout - the duration of the current lease has expired.
14886 = New lease - new lease received
14887 = Event function cannot be added
14888 = Client init error - error initializing the DHCP client
14889 = Server init error - error initializing the DHCP server
14890 = tcpipmgr module not present
14891 = FBTCPIP: Not enough free memory for TCP/IP
14892 = FBTCPIP: TCP/IP Receive error
14893 = Ethernet Library Manager (previously TcpIpMgr) timeout (200 ms)
14894 = FBTCPIP: ethernet nodenumber must be less than 100
14895 = TcpIpDrv error
14896 = Invalid transfer parameter
14897 = Table for storing receive functions full
14898 = No send buffer available
14899 = Frame cannot be sent
14900 = Routing: Device is invalid
14901 = No node number saved in CRM
14902 = Routing: Device path is invalid
14903 = Routing: Path entry is invalid
14904 = Routing: Invalid frame
14905 = Routing: FBASE error
14906 = Routing: Device does not exist
14907 = Routing: Device description string faulty
14908 = Routing: Error reading CAN parameter
14909 = WARNING: Routing: Message on L2 - renmove device control
14910 = WARNING: Routing: Error from FBASE_write()
14911 = WARNING: Routing: No L2-Buffer
14912 = WARNING: Routing: Error from FBASE_read()
14913 = WARNING: Routing: Input-Queue overflow
14914 = WARNING: Routing: Output-Queue overflow
14915 = WARNING: Routing: Reserve 15
14916 = WARNING: Routing: No L2-Buffer (INIT)
14917 = WARNING: Routing: L2-write task not allowed
14918 = WARNING: Routing: Assignment error for a sent frame
14919 = WARNING: Routing: Invalid Buffer
14920 = Device not configured as an INA device
14921 = Command for the device being executed
14922 = Device already reopened for INA communication.
14923 = Device already closed.
14924 = Configured INA device not initialized.
18880 = Permanent memory not configured.
18881 = Too little permanent memory configured.
20000 = No NET2000 manager installed
20001 = Error in length comparison - GetOV (the actual length of the process variable is compared with the length in pvlist)
20002 = Object does not exist on the target station
20003 = Communication error
20004 = NET2000 manager cannot be started or NET2000.station is not defined
20005 = Too many process variables (PVs) per function block (maximum number of PVs per function block = 6)
20100 = PCCSW version < V1.22
20101 = NET2000 configuration changes require the NET2000 management memory to be reconfigured.
20102 = Physical medium is not supported.
20103 = Interface number not supported by the hardware.
20104 = No connection module found on the driver (CAN, ETHERNET).
20105 = CAN initialization error
20106 = No memory free.
20107 = Hardware is not supported.
20108 = Resource handling error
20109 = Configuration redundancy
20110 = Invalid interface description
20111 = Interface does not exist or no driver loaded
20112 = Invalid interface parameters
20120 = NET2000 management destroyed
20121 = NET2000 management destroyed
20122 = Error from the NET2000 event manager.
20123 = no L2 puffer
20124 = error from CAN driver
20125 = no L2 puffer
20126 = L2 puffer error
20127 = error while sending a frame
20128 = initalize error
20129 = wrong length of frame
20130 = Standard serial layer initialization error
20131 = NET2000 buffer management error
20132 = NET2000 buffer management error
20133 = NET2000 buffer management error
20134 = Network management initialization error
20135 = Error copying PV
20200 = Device is not supported
20201 = Interface number wrong or interface not supported
20202 = Baud rate not supported
20203 = Parity not supported
20204 = Number of stop NITS not supported
20205 = Invalid own_ID specified in the MBSOpen() FBK; valid IDs are between 1 and 247
20210 = Invalid ID or ID is 0
20215 = ModBus simulation variable invalid or missing (MBSOpen() and MBSlave() FBK)
20220 = In MBSOpen() or MBMOpen() FBKs: invalid value for timeout parameter (< 250 ms). In MBMCmd(), MBMaster() and MBSlave() FBKs: timeout detected
20221 = Framedriver error 8079 (faulty receive buffer)
20230 = Illegal or not supported data type
20231 = Illegal or not supported network request received
20240 = Invalid entry in data object, invalid length of data object, or an entry is missing or has an invalid length
20241 = Data object not present or data parameter in MBMCmd FBK is 0
20242 = Invalid EventPV specified in the data object
20243 = Invalid ModBus function stated in the data object or in the MBMCmd() FBK
20244 = Invalid node number specified in the data object or in the MBMCmd() FBK
20245 = Invalid LocalPV specified in the data object
20246 = Invalid length specified in the data object (ModBus function 5,6 -> length is always 1)
20250 = No memory for internal library management
20251 = Could not register allocated memory
20252 = Memory cannot be freed for internal library management
20260 = Invalid frame received
20261 = Frame with wrong length received
20262 = Error in frame
20263 = Error in frame check (CRC / LRC) MBMaster() and MBMCmd()
20264 = Error in frame check (CRC) MBMSlave()
20290 = Could not open device driver
20291 = Error receiving a frame (FRM_read())
20292 = No write buffer available (FRM_gbuf())
20293 = Error writing a frame (FRM_write())
20294 = Error in buffer return (FRM_robuf())
20295 = Error in buffer return (FRM_rbuf())
20296 = Error closing the interface (FRM_close())
20301 = The internal value of a step switching mechanism is outside the valid range.
20302 = The internal value of a step switching mechanism is outside the valid range.
20303 = The node number in the response frame from the slave is not addressed to the master (node number <> 0x10).
20304 = Frame from slave contains no slave response code.
20305 = Response frame has not arrived within timeout time.
20306 = Error while receiving a character (overflow, stop bit, parity error, etc.)
20307 = Invalid index received. Bit 6 not set (0x40).
20308 = Valid STX (start of text) received within a data frame. Data already received is ignored and a new frame is received.
20309 = Data length within the frame is less than 5 characters. Valid MININET frames contain at least 5 bytes of data.
20310 = Frame received with an invalid block checksum.
20311 = Additional data received after the checksum for the MININET frame. The frame has therefore been rejected and a new frame is awaited.
20312 = The frame received is addressed to a different slave. Note: The exec output is not set if this error is reported.
20313 = The frame received is a slave response for the master. Note: The exec output is not set if this error is reported.
20314 = There is no 'R' after the reset slave command in a broadcast frame.
20315 = There is no 'R' after the reset slave command in a normal frame.
20316 = Address length of the packed writing/reading request must be 2 bytes.
20317 = Address length of the packed writing/reading broadcast request must be 2 bytes.
20318 = Invalid index received.
20319 = The Write counter request cannot be executed. The MNS_REG variable has not been declared.
20320 = The Read counter request cannot be executed. The MNS_REG variable has not been declared.
20321 = The Write counter request in the incoming broadcast frame cannot be executed. The MNS_REG variable has not been declared.
20322 = The MNS_REG variable is shorter than the address and data length specified in the Write counter request.
20323 = The MNS_REG variable is shorter than the address and data length specified in the Read counter request.
20324 = The MNS_REG variable is shorter than the address and data length specified in the Write counter broadcast request.
20325 = The Write flag request cannot be executed. The MNS_FLAG variable has not been declared.
20326 = The Read flag request cannot be executed. The MNS_FLAG variable has not been declared.
20327 = The Write flag (packed) request cannot be executed. The MNS_FLAG variable has not been declared.
20328 = The Read flag (packed) request cannot be executed. The MNS_FLAG variable has not been declared.
20329 = The Write flag broadcast request cannot be executed. The MNS_FLAG variable has not been declared.
20330 = The Write flag (packed) broadcast request cannot be executed. The MNS_FLAG variable has not been declared.
20331 = The MNS_FLAG variable is shorter than the address and data length specified in the Write flag request.
20332 = The MNS_FLAG variable is shorter than the address and data length specified in the Read flag request.
20333 = The MNS_FLAG variable is shorter than the address and data length specified in the Write flag (packed) request.
20334 = The MNS_FLAG variable is shorter than the address and data length specified in the Read flag (packed) request.
20335 = The MNS_FLAG variable is shorter than the address and data length specified in the Write flag broadcast request.
20336 = The MNS_FLAG variable is shorter than the address and data length specified in the Write flag (packed) broadcast request.
20337 = The Write input request cannot be executed. The MNS_IN variable has not been declared.
20338 = The Read input request cannot be executed. The MNS_IN variable has not been declared.
20339 = The Write input (packed) request cannot be executed. The MNS_IN variable has not been declared.
20340 = The Read input (packed) request cannot be executed. The MNS_IN variable has not been declared.
20341 = The Write input broadcast request cannot be executed. The MNS_IN variable has not been declared.
20342 = The Write input (packed) broadcast request cannot be executed. The MNS_IN variable has not been declared.
20343 = The MNS_IN variable is shorter than the address and data length specified in the Write input request.
20344 = The MNS_IN variable is shorter than the address and data length specified in the Read input request.
20345 = The MNS_IN variable is shorter than the address and data length specified in the Write input (packed) request.
20346 = The MNS_IN variable is shorter than the address and data length specified in the Read input (packed) request.
20347 = The MNS_IN variable is shorter than the address and data length specified in the Write input broadcast request.
20348 = The MNS_IN variable is shorter than the address and data length specified in the Write input (packed) broadcast request.
20349 = The Write output request cannot be executed. The MNS_OUT variable has not been declared.
20350 = The Read output request cannot be executed. The MNS_OUT variable has not been declared.
20351 = The Write output (packed) request cannot be executed. The MNS_OUT variable has not been declared.
20352 = The Read output (packed) request cannot be executed. The MNS_OUT variable has not been declared.
20353 = The Write output broadcast request cannot be executed. The MNS_OUT variable has not been declared.
20354 = The Write output (packed) broadcast request cannot be executed. The MNS_OUT variable has not been declared.
20355 = The MNS_OUT variable is shorter than the address and data length specified in the Write output request.
20356 = The MNS_OUT variable is shorter than the address and data length specified in the Read output request.
20357 = The MNS_OUT variable is shorter than the address and data length specified in the Write output (packed) request.
20358 = The MNS_OUT variable is shorter than the address and data length specified in the Read output (packed) request.
20359 = The MNS_OUT variable is shorter than the address and data length specified in the Write output broadcast request.
20360 = The MNS_OUT variable is shorter than the address and data length specified in the Write output (packed) request.
20361 = The write command in the MININET request has already been executed.
20362 = Conflict between command and index: The incoming index is the same as in the preceding frame, but this frame contains another command.
20363 = Unknown command in incoming frame.
20364 = Unknown command in incoming broadcast frame.
20365 = Unknown command in incoming broadcast frame. A broadcast frame cannot contain the Read counter command.
20366 = Unknown command in incoming broadcast frame. A broadcast frame cannot contain the Read flag command.
20367 = Unknown command in incoming broadcast frame. A broadcast frame cannot contain the Read input command.
20368 = Unknown command in incoming broadcast frame. A broadcast frame cannot contain the Read output command.
20369 = Unknown command in incoming broadcast frame. A broadcast frame cannot contain the Read flag (packed) command.
20370 = Unknown command in incoming broadcast frame. A broadcast frame cannot contain the Read input (packed) command.
20371 = Unknown command in incoming broadcast frame. A broadcast frame cannot contain the Read output (packed) command.
20372 = Invalid data type for enable flag variable (BOOL or USINT).
20373 = PV length in the command data table is longer than the PV name data type.
20374 = PV length in the command data table is longer than the PV name data type.
20375 = The PV name string in the command data table consists only of spaces.
20376 = The PV name string in the command data table consists only of spaces.
20377 = Node number in the command data table is greater than 0x7F.
20378 = A PV length that is not permissible in MININET frames was specified in the command data table for the Write counter command.
20379 = A PV length that is not permissible in MININET frames was specified in the command data table for the Read counter command.
20380 = A PV length that is not permissible in MININET frames was specified in the command data table for the Write flag command.
20381 = A PV length that is not permissible in MININET frames was specified in the command data table for the Read flag command.
20382 = A PV length that is not permissible in MININET frames was specified in the command data table for the Write input command.
20383 = A PV length that is not permissible in MININET frames was specified in the command data table for the Read input command.
20384 = A PV length that is not permissible in MININET frames was specified in the command data table for the Write output command.
20385 = A PV length that is not permissible in MININET frames was specified in the command data table for the Read output command.
20386 = A PV offset and PV length that exceed the address range in the slave were specified in the command data table for the Write counter command.
20387 = A PV offset and PV length that exceed the address range in the slave were specified in the command data table for the Read counter command.
20388 = A PV offset and PV length that exceed the address range in the slave were specified in the command data table for the Write flag command.
20389 = A PV offset and PV length that exceed the address range in the slave were specified in the command data table for the Read flag command.
20390 = A PV offset and PV length that exceed the address range in the slave were specified in the command data table for the Write input command.
20391 = A PV offset and PV length that exceed the address range in the slave were specified in the command data table for the Read input command.
20392 = A PV offset and PV length that exceed the address range in the slave were specified in the command data table for the Write output command.
20393 = A PV offset and PV length that exceed the address range in the slave were specified in the command data table for the Read output command.
20394 = Invalid command in the command data table: Write flag (packed) is not supported by the DRV_mn library.
20395 = Invalid command in the command data table: Read flag (packed) is not supported by the DRV_mn library.
20396 = Invalid command in the command data table: Write input (packed) is not supported by the DRV_mn library.
20397 = Invalid command in the command data table: Read input (packed) is not supported by the DRV_mn library.
20398 = Invalid command in the command data table: Write output (packed) is not supported by the DRV_mn library.
20399 = Invalid command in the command data table: Read output (packed) is not supported by the DRV_mn library.
20400 = Invalid command in the command data table.
20401 = Fatal error! New command in command data table is unknown.
20402 = Invalid index or invalid frame length in slave response to reset slave command.
20403 = Invalid index in slave response. Index is not an error index and is not identical to the request index.
20406 = Invalid length of a response to a write command.
20407 = Invalid length of a response to a read command.
20408 = Invalid value at ident input in the MNMclien() or MNSservr() FBKs.
20409 = Invalid value at ident input in the MNMclose() or MNSclose() FBKs.
20410 = Invalid ident value when MNMopen() or MNSopen() is called again. Either provide a valid value or call MNMclose() or MNSclose() first.
20411 = No command data table attached to the vars input.
20412 = The enable flag name is longer than 81 characters.
20413 = The PV name is longer than 81 characters.
20414 = The enable flag name is longer than 81 characters.
20415 = The PV name is longer than 81 characters.
20416 = The command data table contains no entries.
20417 = The command data table contains no entries.
20418 = The length of a null string (spaces) for an enable flag does not match the length of the enable flag name in the first entry of the command data table.
20419 = The length of a name (including spaces where applicable) for an enable flag does not match the length of the enable flag name in the first entry of the command data table.
20420 = The length of a PV name string does not match the string length of PV name in the first entry of the command data table.
20421 = The length of an entry (command) does not match the length of the first entry in the command data table.
20422 = Invalid data type for enable flag PV (BOOL or USINT).
20423 = Warning: No valid entries found in the command data table. Do the enable flag PV and PV name variables exist?
20424 = Fatal error: Command data table has been modified. The string length for enable flag is no longer valid.
20425 = Master initialization error - fatal error: Command data table has been modified. The string length for PV name is no longer valid.
20426 = Fatal error: Command data table has been modified. The string length for PV name is no longer valid.
20427 = A valid command data table has not been initialized in the MNMopen() function.
20428 = Invalid node number! (higher or lower order nibble has the value 0)
20429 = Warning: No MININET slave variables found (MNS_xxx variables).
20451 = Index 0xC1: Index error.
20452 = Index 0xC2: Conflict between index and command.
20453 = Index 0xC3: Invalid parameter.
20454 = Index 0xC4: Unknown command.
20458 = Index 0xC8: Command already executed.
20489 = Connection identifier cident invalid
20502 = An argument is invalid
20503 = Interner PNA Tabellen Overflow
20512 = Connection lost
20515 = No input available.
20516 = Connection has been established.
20517 = The socket is non-blocking and a previous connection attempt has not yet completed.
20518 = Destination Adresse ungültig
20519 = Target address of receiver (IP address, port) is invalid.
20520 = Message too long. Data cannot be transferred in one unit.
20528 = The specified address is already in use.
20529 = The specified address is not available.
20531 = The target network cannot be accessed.
20535 = No more internal pNA buffers available.
20600 = Wrong parameter given (NULL pointer)
20601 = Object already present
20602 = Wrong target memory specified
20603 = No memory available for module to be created
20604 = Error installing data object
20605 = Object not found
20606 = Wrong object type (not data object)
20607 = Wrong offset specified
20608 = Wrong length specified
20609 = Data object not found.
20610 = Wrong date in SetDate (DatObjChangeDate)
20611 = Incorrect state of the data object
20612 = Error activating the asynchronous handler (only SG4)
20613 = Module name too long (max. 10 characters)
20614 = Error while saving the data object in "Flash" memory
20615 = Modul im SYSROM kann nicht gelöscht werden
20630 = Wrong target memory specified for the "doNO_CS" option
20700 = Invalid path
20701 = Data length specified too small
20702 = No more file handles
20703 = System error
20704 = Invalid type.
20705 = File already exists.
20706 = Access denied
20707 = Illegal mode.
20708 = File does not exist.
20709 = Illegal file device.
20710 = No memory available
20711 = Invalid file offset.
20712 = File not allowed.
20713 = No memory available
20714 = General error in FileOpen.
20715 = General error in FileClose.
20716 = General error in FileRead.
20717 = General error in FileWrite.
20718 = General error in Ioctl.
20719 = Data parameter error
20720 = Error in the FileIO manager.
20721 = File not open.
20722 = Invalid directory.
20723 = Directory does not exist.
20724 = Directory not empty.
20725 = Directory already exists.
20726 = Error retrieving memory information.
20727 = Copy memory error
20728 = No Idents directory available.
20729 = Invalid parameter specified.
20730 = Directory already exists.
20731 = The specified handle is invalid.
20732 = Another IP address has already been defined for a host name, i.e. the DNS server supplies another IP address.
20733 = Invalid parameter
20734 = Invalid user name or password
20735 = Invalid number of bytes.
20796 = Could not initialize library.
20797 = Error in device driver.
20798 = Error in device manager.
20799 = System error
20800 =  POWERLINK: Base error AC112.
20801 =  POWERLINK: Station failure
20802 = POWERLINK: General error for local interface.
20803 = POWERLINK: General error for local interface.
20804 = POWERLINK: Cycle time violation (see info or binary data for actual time)
20805 =  POWERLINK: Specific Controlled Node error
20806 =  POWERLINK: Station recognized as active
20807 = POWERLINK: Node number used several times (info or binary data specifies node number).
20808 =  POWERLINK: Base error EX282
20809 = POWERLINK: Different cycle time configured on the Controlled Node than on the Managing Node.
20810 = POWERLINK: A Controlled Node is cyclically addressed by more than one Managing Node.
20811 = POWERLINK: A fatal error has occurred.
20900 =  Powerlnk library: Version conflict in system structures
20901 =  Powerlnk library: Error reserving memory
20903 =  Powerlnk library: Incorrect hardware device
20904 =  Powerlnk library: Configuration was not found
20905 =  Powerlnk library: Configuration already carried out
20906 =  Powerlnk library: Desired function is not supported
20908 =  Powerlnk library: Invalid parameter given to the function
20911 =  Powerlnk library: Incorrect or invalid Ident given
20913 =  Powerlnk library: Station allocation failed
20914 =  Powerlnk library: Creating a non-cyclic communication channel failed
20915 =  Powerlnk library: Reserving the buffer failed
20916 =  Powerlnk library: Non-cyclic communication channel is already open.
20917 =  Powerlnk library: No frame ready to be called.
20918 =  Powerlnk library: The frame to be sent is larger than the buffer used to transfer it
20919 =  Powerlnk library: Previous plAcycWrite() on this channel has not yet been completed.
20920 =  Powerlnk library: Offset too large for the copy instruction
20921 =  Powerlnk library: NIL pointer given as a parameter
20922 =  Powerlnk library: Buffer overflow
20923 =  Powerlnk library: Data point not available
20924 =  Powerlnk library: Incorrect task class
20925 =  Powerlnk library: Station not active
20926 =  Powerlnk library: Too many POWERLINK interfaces are configured
20927 =  Powerlnk library: Bus number configured twice
20928 =  Powerlnk library: Synchronization must take place using the system configuration (beginning with AS 2.2).
20929 =  Powerlnk library: Synchronizing the task class system failed.
20930 =  Powerlnk library: Conflict in the POWERLINK configuration 
20931 =  Powerlnk library: The specified data point is not in the station's poll response frame and can therefore not be heard.
20932 =  Powerlnk library: Data type of object not supported
20933 =  Powerlnk library: No PDO mapping defined
20934 =  Powerlnk library: Entry of hardware information not supported
20935 =  Powerlnk library: POWERLINK interface started via task class
20936 =  POWERLINK: DMA transfer of output data finished too late
20947 = No response from 2003 module
20948 = Addressed 2003 module removed
20949 = 2003 I/O module not present
20950 =  Powerlnk library: Error while parsing the data point or channel definition
20951 =  Powerlnk library: Data point definition continues past an expected end
20952 =  Powerlnk library: No % in expected position in the data point description
20953 =  Powerlnk library: Direction specification in the data point definition is neither IN (I) nor OUT (Q)
20954 =  Powerlnk library: Incorrect interface number
20955 = Powerlnk library: Incorrect station number
20956 = Powerlnk library: Incorrect module number
20957 =  Powerlnk library: Invalid submodule or screw-in slot number
20958 = Powerlnk library: Incorrect channel number
20959 = Powerlnk library: Incorrect bit number
20960 = Powerlnk library: Too many numbers in the data point definition
20961 = Powerlnk library: Incorrect data type or length for NETTIME
20962 =  Powerlnk library: Incorrect slot number (SL).
20963 = Powerlnk library: Incorrect subslot number (SS).
20964 =  Powerlnk library: Characters follow a valid channel or device name
20965 = Syntax problem with size or invalid size of the data point
20980 =  Powerlnk library: Firmware or configuration update message
20981 = Powerlnk library: Problem starting POWERLINK hardware.
20982 = Powerlnk library: The IF686 requires a firmware update.
20997 = Powerlnk library: Internal error which should never occur (in error logbook)
20998 = Powerlnk library: POWERLINK hardware exception (in error logbook)
20999 =  Powerlnk library: Problem starting POWERLINK software.
21002 = Illegal offset
21003 = CPU type has no "fixed memory"
21010 = FBK/function not supported on this CPU.
21011 = I/O handling fixed in LOOP mode (digital modules only).
21012 = Cyclic I/O handling active, IOCTDisableCyclic() required.
21013 = Cyclic I/O handling inactive, IOCTEnableCyclic() required.
21020 = Target system not ARemb
21021 = Incorrect data length specified (data length too large, etc.)
21022 = Incorrect offset specified (offset too large, etc.)
21023 = Internal error
21024 = SRAM not present on target
21026 = Semaphore not available. SRAM access is currently being blocked by another function or a second call.
21027 = Error during semaphore creation.
23001 = Timeout, cable unplugged; no connection
23002 = Response timeout; no disk in drive
23003 = Error receiving
23004 = Frame error: invalid frame length.
23005 = Frame error: invalid index.
23006 = Invalid parameter.
23007 = Invalid parameter.
23008 = Frame error: invalid checksum.
23009 = Receive error: no empty response frame received.
23010 = Receive error: error receiving data.
23011 = Receive error: invalid node number received.
23012 = Frame error: STX in frame.
23013 = Receive error: reset index receive error.
23014 = Frame error: response to invalid request frame.
23020 = Invalid device number
23021 = Device 3 not on 2005
23022 = Device 4 or 7 only exists on 2005.
23023 = Device 104 or 107 only exists on 2005.
23024 = Device 204 or 207 only exists on 2005.
23025 = Device 5 or 8 only exists on 2005.
23026 = Device 105 or 108 only exists on 2005.
23027 = Device 205 or 208 only exists on 2005.
23028 = Device 6 or 9 only exists on 2005.
23029 = Device 106 or 109 only exists on 2005.
23030 = Device 206 or 209 only exists on 2005.
23031 = No valid device string, length = 0
23032 = "IF" not contained in the device string
23033 = Device 0 is not supported
23040 = Disk is write protected
23041 = Fatal error: calculated sector is outside of FAT.
23042 = Fatal error: calculated sector is outside of FAT.
23043 = Fatal error: calculated sector is outside of FAT.
23044 = Fatal error: calculated sector is outside of FAT.
23045 = Fatal error: calculated sector is outside of FAT.
23046 = No available entry in the root directory
23047 = Address not found on disk.
23048 = Invalid SEEK offset
23049 = Error copying data.
23050 = Invalid sector size
23051 = Invalid sector size
23052 = Invalid recal response
23053 = Invalid recal response
23054 = Invalid recal response
23055 = Invalid recal response
23056 = Invalid recal response
23057 = Invalid recal response
23058 = Disk is write protected
23059 = Address not found on the disk
23060 = AVT error: Invalid pointer in AVT entries
23061 = Invalid static DS pointer
23062 = Buffer smaller than the size of an entry
23063 = ident input is an uneven address.
23064 = Ident input is invalid
23065 = No address
23066 = No free memory
23067 = Incorrect cluster offset
23069 = Write error: head, record or number invalid.
23070 = Open error: file already open -> close necessary.
23071 = Open error: DRIVE input not equal to 0 or 1.
23072 = Read/write error: file not open.
23073 = Open error: frame driver not installed.
23074 = Write / read error: see offset too large.
23075 = The file length = 0
23076 = Read error: read response ST0, ST1, or ST2 invalid.
23077 = Read error: head, record or number invalid.
23078 = The diskette was changed between open and close.
23079 = Disk ID error
23080 = Disk full
23081 = Write error: write response ST0, ST1, or ST2 invalid.
23082 = Invalid pointer length: buffer pointer or buffer size is not equal to 0
23083 = The disk was changed between open and close
23084 = The disk was changed between open and close
23090 = The offset in the cluster is invalid
23091 = The end of the FAT is reached and the end of a cluster was not found
23092 = Another function block is enabled
23093 = Invalid step when receiving data, allocated memory is invalid
23094 = Invalid program step, allocated memory is invalid
23095 = No frame to be sent, allocated memory is invalid
23096 = Invalid program step, allocated memory is invalid
23097 = Calculated sector offset is larger than the amount if bytes in the cluster
23098 = Calculated sector offset is larger than the amount if bytes in the cluster
23099 = System task timeout.
23100 = Decimal "." in the file extension
23101 = Invalid character in the file name
23102 = File name is empty; no valid characters
23103 = File name is not null-terminated
23104 = File name contains spaces
23105 = File extension contains spaces
23106 = Fatal error: the most recent cluster is larger than the previous cluster.
23107 = Fatal error: the calculated sector is outside of the FAT.
23108 = Fatal error: the calculated sector is outside of the FAT.
23109 = Fatal error: the calculated sector is outside of the FAT.
23110 = Fatal error: the calculated sector is outside of the FAT.
23111 = The calculated sector offset is larger than the number of bytes in the cluster.
23112 = FAT contains errors
23113 = No EOF in the FAT
24000 = Illegal device connected.
24001 = Illegal PLC2000 interface defined.
24002 = Illegal baud rate defined.
24003 = Illegal parity defined
24010 = Illegal file type - file number combination or unsupported file type.
24011 = Illegal or unsupported file number.
24012 = Illegal or unsupported element number.
24015 = Illegal or unsupported conversion type.
24017 = Illegal or unsupported file number received
24020 = Network time out occured (communication between PLC2000 system and the network interface module is down).
24021 = Network problems (check parity, baud rate and cables).
24031 = Received more than one request from network interface module.
24033 = Own node number out of range.
24040 = Data object not found (Check data object name).
24041 = Incorrect data object name or data object not found.
24045 = Illegal PLC2000 variable or variable not defined (entries in data object).
24049 = Illegal acces for this file.
24060 = Unsupported Allen Bradley PLC-type defined.
24061 = Illegal or unsupported address receivced.
24062 = Illegal file length
24063 = Illegal check type selected.
24080 = Environment lost
24090 = Could not allocate memory
24091 = Could not store memory handle
24092 = Could not de allocate memory
24098 = Could not open device driver
24099 = Could not close device driver
24800 = COMMSERV: Invalid MI code
24801 = COMMSERV: Exception
24802 = COMMSERV: Invalid invoke number
24803 = COMMSERV: Incorrect type in communication frame
24804 = COMMSERV: Answer is too large for the communication frame
24805 = COMMSERV: Invalid physical access
24806 = COMMSERV: A maximum of 16 users is possible for events
24807 = COMMSERV: Error in event handling
24808 = COMMSERV: Connection is already defined
24820 = INA event PV: Task does not exist
24821 = INA-EventPV: Connection error
24822 = INA event PV: Invalid link parameter
24823 = INA event PV: Invalid unlink parameter
24824 = PVI/Ina2000 event PV: Error accessing PV
24825 = PVI/Ina2000 event PV: Error accessing dynamic PV
24826 = PVI/Ina2000 event PV: PV cannot be used as event-PV (data type, etc.)
24827 = PVI/Ina2000 event PV: Error in activate parameters
24830 = INA event PV: VW entry not found
24831 = Logger data object not on target
24832 = Entry not available in logger data object
24833 = Maximum number of connections reached (64 simultaneous logger read tasks)
24834 = Log handle invalid
24835 = No memory available on the target
24836 = Incorrect logger read command
24837 = Error in logger request frame
24838 = Logger module read error
24839 = Invalid logger event
24840 = Access to logger data object not possible
24841 = arlogClearEventInfo() error
24842 = Logger event error
25000 = AR-RTK: Invalid object ident
25001 = AR-RTK: Object with this name not found
25002 = AR-RTK: Invalid object type
25003 = AR-RTK: Object table full
25004 = AR-RTK: Object already exists
25005 = AR-RTK: Incorrect object name
25010 = AR-RTK: Invalid task priority
25011 = AR-RTK: No free stack area for OS task
25012 = AR-RTK: Task not suspended
25013 = AR-RTK: Task already suspended
25014 = AR-RTK: Invalid value index for task register
25015 = AR-RTK: Task timer no longer available
25016 = AR-RTK: Cannot create Automation Runtime task
25017 = AR-RTK: Cannot delete Automation Runtime task
25030 = AR-RTK: FIFO not not created (memory, etc.)
25031 = AR-RTK: FIFO not not deleted (MemFree, etc.)
25032 = AR-RTK: FIFO not written to (fifo full, etc.)
25033 = AR-RTK: FIFO not read from (fifo empty)
25034 = AR-RTK: FIFO not not released
25035 = AR-RTK: FIFO Read/Write with timeout at attached
25036 = AR-RTK: FIFO at Read/Write not attached
25037 = AR-RTK: FIFO at Read/Write attached by other task
25038 = AR-RTK: FIFO not configured for attach
25040 = AR-RTK: Cannot create Automation Runtime semaphore
25041 = AR-RTK: Cannot delete Automation Runtime semaphore
25042 = AR-RTK: Cannot release Automation Runtime semaphore
25060 = AR-RTK: Invalid memory type
25061 = AR-RTK: Not enough dynamic memory free
25062 = AR-RTK: Memory not in heap
25063 = AR-RTK: Unable to create shared memory
25064 = AR-RTK: Shared memory cannot be erased
25065 = AR-RTK: Map of shared memory not possible
25066 = AR-RTK: Unmap of shared memory not possible
25080 = AR-RTK: Invalid interrupt number
25081 = AR-RTK: ConnectInterrupt not possible
25082 = AR-RTK: DisonnectInterrupt not possible
25090 = AR-RTK: Invalid cycle time for timer
25091 = AR-RTK: Invalid date/time values
25092 = AR-RTK: RTC time cannot be set
25093 = AR-RTK: TIMER can't be created
25094 = AR-RTK: TIMER can't be deleted
25095 = AR-RTK: Timer not started
25096 = AR-RTK: Timer not stopped
25100 = AR-RTK: Debugging not supported
25101 = AR-RTK: Cannot set breakpoint
25102 = AR-RTK: Cannot delete breakpoint
25103 = AR-RTK: Step not possible when debugging
25104 = AR-RTK: GO not possible when debugging
25105 = AR-RTK: Invalid register number when debugging
25106 = AR-RTK: No memory available when debugging
25107 = AR-RTK: No events available when debugging
25108 = AR-RTK: Breakpoint table full
25109 = AR-RTK: Breakpoint not found in table
25200 = AR-RTK: Error using RtkCreateSoftPlc
25201 = AR-RTK: RTK initialization not possible
25202 = AR-RTK: RTK deinitialization not possible
25203 = AR-RTK: Fatal internal RTK error
25204 = AR-RTK: Wait function timeout
25205 = AR-RTK: Function not supported by RTK
25206 = Unhandled C++ exception
25250 = AR-RTK: CriticalSection can't be created
25251 = AR-RTK: CriticalSection can't be deleted
25252 = AR-RTK: CriticalSection can't be entered
25253 = AR-RTK: CriticalSection can't be left
25300 = AR-RTK: EXCEPTION Divide error
25301 = AR-RTK: EXCEPTION Debug exception
25302 = AR-RTK: EXCEPTION NMI Interrupt
25303 = AR-RTK: EXCEPTION Breakpoint
25304 = AR-RTK: EXCEPTION INTO-detected overflow
25305 = AR-RTK: EXCEPTION BOUND Range exceeded
25306 = AR-RTK: EXCEPTION Invalid opcode
25307 = AR-RTK: EXCEPTION Device not available
25308 = AR-RTK: EXCEPTION Double fault
25309 = AR-RTK: EXCEPTION CoProcessor Segment Overrun
25310 = AR-RTK: EXCEPTION Invalid task state segment
25311 = AR-RTK: EXCEPTION Segment not present
25312 = AR-RTK: EXCEPTION Stack fault
25313 = AR-RTK: EXCEPTION General protection
25314 = AR RTK: Exception page fault
25315 = AR-RTK: EXCEPTION Intel-reserved
25316 = AR-RTK: EXCEPTION Floating point error
25317 = AR-RTK: EXCEPTION Alignment check
25318 = AR-RTK: EXCEPTION Machine Check
25398 = AR-RTK: EXCEPTION Intel reserved
25399 = AR-RTK: EXCEPTION Unknown
25500 = AR-RTK: DD incorrect device ident
25501 = AR-RTK: DD device function not supported by driver
25502 = AR-RTK: DD registration not possible
25503 = AR-RTK: DD deregistration not possible
25504 = AR-RTK: DD shutdown not possible
25505 = AR-RTK: DD read not possible
25506 = AR-RTK: DD write not possible
25507 = AR-RTK: DD IoControl not possible
25508 = AR-RTK: DD invalid IoControl code
25509 = AR-RTK: DD invalid device parameter
25510 = AR-RTK: DD device not in list
25511 = AR-RTK: DD driver name is longer than the name field
25512 = AR-RTK: DD insert in device list not possible
25513 = AR-RTK: DD incorrect driver ident
25514 = AR-RTK: DD management initialization not possible
25515 = AR-RTK: DD driver installation not possible
25516 = AR-RTK: DD driver deinstallation not possible
25517 = AR-RTK: DD device description subject not found
25701 = Timeout on receiving data.
25702 = Acknowledgement DLE (data link escape) of STX (start of text) not received. Invalid character received.
25703 = Acknowledgement NAK (negative acknowledgement) of STX (start of text) not received.
25712 = Invalid block mark (BCC) received.
25713 = Invalid character received (parity or stop bit error in incoming character).
25714 = Acknowledgement NAK of STX (start of text) not received.
25715 = No acknowledgement (NAK) after receipt of data.
25728 = Less data received than specified in request header.
25740 = Invalid ident in S39Slave() FBK.
25741 = Invalid ident in S39SClose() FBK.
25742 = Invalid ident in S39SOpen() FBK.
25750 = Invalid length in S39_TXLEN.
25751 = Invalid length in S39_TXLEN. The length is greater than the S39_TXBUF data buffer.
25752 = Invalid length of data received.
25753 = Invalid length of data received. The length is greater than the S39_RXBUF data buffer.
25760 = Invalid mode in S39Slave() FBK.
25780 = Fatal system error. The memory structure (ident) was destroyed.
25784 = The users mode description string is to long.
25785 = The mode description string with default baud rate setting, is to long.
25786 = The mode description string with default parity setting, is to long.
25787 = The S39_RXBUF variable has not been declared.
25788 = The S39_RXLEN variable has not been declared or has the wrong data type (USINT).
25789 = The S39_TXBUF variable has not been declared.
25790 = The S39_TXLEN variable has not been declared or has the wrong data type (USINT).
25800 = Base error number for all protocol errors
25812 = CPU code in incoming request header is not equal to 0xF. CPU code not supported by the DRV_3964 library.
25816 = Invalid message type in incoming request
25820 = Invalid data block address in incoming request.
25822 = Invalid message command in incoming request.
25850 = Coordination flag in incoming request is not equal to 0xFFF. Coordination flag not supported by the DRV_3964 library.
25852 = Invalid data block length in incoming request.
25854 = Second byte in incoming request (message header) is not equal to 0.
25901 = Timeout on receiving data
25902 = Parity, overrun or stopbit error on receiving data
25903 = "Received frame too long. ""Rec_en"" was not set when the frame was received"
25904 = Block check character BCC1 false in the received frame
25905 = Received frame too long. Additional data was received after block check character BCC1
25906 = Block check character BCC2 false in the received frame
25907 = Received frame too long. Additional data was received after block check character BCC2
25908 = Block check character BCC1 false in the received acknowledgement frame
25909 = Acknowledgement in received acknowledgement frame is negative or false
25940 = Incorrect pointer connected to variable area (ident)
25941 = Incorrect pointer connected to variable area (ident)
25942 = Incorrect pointer connected to variable area (ident)
25943 = Send length in L1_TXLEN is larger than the maximum frame data length (64 bytes)
25944 = Send length in L1_TXLEN is larger than the send buffer L1_TXBUF
25945 = Length of received data is larger than the receive buffer L1_RXBUF
25980 = Device number 1 does not exist on this hardware device
25981 = Device number 2 does not exist on this hardware device
25982 = Device number 3 does not exist on this hardware device
25986 = Connected device number is larger than 3
25987 = Interface mode for device number 2 on CP152/CP153 is incorrect
25988 = Interface mode for device number 2 on MP100 is incorrect
25989 = Interface mode for device number 3 on CP100 is incorrect
25991 = Variable L1_RXBUF not declared
25992 = Variable L1_RXLEN not declared or not declared as BYTE
25993 = Variable L1_TXBUF not declared
25994 = Variable L1_TXLEN not declared or not declared as BYTE
25995 = Variable L1_RXSOURCE not declared as BYTE
25996 = Slave number incorrect. Slave number 0 is set
25997 = Slave number incorrect. Slave number is larger than 30
26001 = AR-DevMan: device manager init error
26002 = AR-DevMan: driver does not support DM-function
26003 = AR-DevMan: no free admin entry
26004 = AR-DevMan: device manager not started
26005 = AR-DevMan: device driver already installed
26006 = AR-DevMan: device driver not found (not installed)
26007 = AR-DevMan: delete not possible because of existing reference to DD
26008 = AR DevMan: Device not found (not configured).
26009 = AR-DevMan: deinit not possible because of existing reference to device
26010 = AR-DevMan: device already initialized
26011 = AR-DevMan: device not initialized
26012 = AR-DevMan: device not opened
26013 = AR-DevMan: invalid device name (emptystring)
26014 = AR-DevMan: invalid device driver name (emptystring)
26051 = General error from xDeviceInit().
26052 = AR-DD: xDeviceDeInit() error
26053 = AR-DD: xDeviceShutDown() error
26054 = AR-DD: xDeviceOpen() error
26055 = AR-DD: xDeviceClose() error
26056 = AR-DD: no more read/write requests accepted (async read/write)
26057 = AR-DD: no pending read/write response (async read/write)
26058 = AR-DD: no more opens permitted on the device
26059 = AR-DD: IOCTL-code not supported
26060 = AR-DD: invalid IOCTL-code for this DD-type
26061 = AR-DD: xDeviceIoControl() error
26062 = AR-DD: xDeviceRead() error
26063 = AR-DD: xDeviceWrite() error
26064 = AR-DD: xDeviceWrite: not enough space for write-data
26065 = AR-DD: cevice ident invalid
26066 = Device would block in blocking mode (no data available to read).
26100 = AR-DdSerialFrame: base errornumber
26101 = Open: /PHY not supported.
26102 = Open: /FCCTS not supported.
26103 = Open: /RTSTX not supported.
26104 = Open: /?? not supported.
26150 = AR-DdCan: base error number
26151 = AR-DdCan: IOCTL: no pending event
26152 = AR-DdCan: Invalid type of CAN object
26153 = AR-DdCan: No message buffer
26154 = AR-DdCan: no message buffer
26155 = AR-DdCan: no data
26156 = AR-DdCan: FULLCAN not supported
26157 = AR-DdCan: data overwritten
26158 = AR-DdCan: data inconsistent
26159 = AR-DdCan: syntax error in parameter string
26160 = AR-DdCan: invalid interface
26161 = CAN RX/TX FIFO is full. No additional entries possible.
26162 = No free message buffer for FullCAN.
26200 = AR-DdFile: Error base.
26201 = AR-DdFile: Invalid mode or permission string.
26202 = AR-DdFile: Access not possible using the desired mode (read/write, etc.).
26203 = AR-DdFile: No more file handles available (RT-OS)
26204 = AR-DdFile: File already exists (/MODE=E: Exclusive)
26205 = AR-DdFile: File not found / no additional file found.
26206 = AR-DdFile: I/O control code function not allowed for a file device, only for files.
26207 = AR-DdFile: I/O control code function not allowed for files, only for file devices.
26208 = AR-DdFile: Not enough space for file with Write / ChangeSize.
26209 = AR-DdFile: Invalid offset or invalid origin
26210 = AR-DdFile: Invalid path (length > 255 characters).
26211 = AR-DdFile: File already exists (new name - rename)
26212 = AR-DdFile: Invalid type
26213 = AR-DdFile: no further entries (directory/file) in the read directory
26214 = AR-DdFile: Could not determine available memory
26215 = AR-DdFile: Invalid directory name
26216 = AR-DdFile: Directory to be created already exists
26217 = AR-DdFile: Directory to be opened does not exist
26218 = AR-DdFile: Directory to be deleted is not empty
26219 = AR-DdFile: No more handles available (obsolete)
26220 = AR-DdFile: Invalid handle
26221 = AR-DdFile: Error during copying
26222 = AR-DdFile: Not enough memory on target device (copy error)
26223 = AR-DdFile: Error creating the CS for the NetDeviceList
26224 = AR-DdFile: NetDevLink UserConfig error (user name or password missing)
26225 = AR-DdFile: global NetIoDevList not installed (when called)
26226 = AR-DdFile: Not enough memory available
26227 = AR-DdFile: NetIo device does not exist
26228 = AR-DdFile: NetIo DevLink failed
26229 = AR-DdFile: NetIo protocol not supported
26230 = AR-DdFile: Device already exists with a different user/password
26231 = AR-DdFile: Different IP addresses for one host name
26232 = AR-DdFile: Invalid port number in device parameter string
26233 = AR-DdFile: Invalid number of bytes specified
26234 = AR-DdFile: Function not supported for this file device
26235 = AR-DdFile: File device no longer available (e.g. USB flash drive removed)
26251 = AR-DdNv: Ioctl, Read, Write: not permitted for NV device
26252 = AR-DdNv: Ioctl: not permitted for NV memory
26253 = AR-DdNv: Init: NV device not found.
26254 = AR-DdNv: Init: NV path doesn't exist.
26255 = AR-DdNv: Open: Data block already open (only 1 parallel open allowed).
26256 = AR-DdNv: Ioctl: Error setting the data block length
26257 = AR-DdNv: Ioctl: Error setting a certain data offset.
26258 = AR-DdNv: Ioctl: _NV_FINDFIRST, _NV_FINDNEXT, NV_DELETEDATA: Data area not present.
26260 = AR-DdNv: No memory for restoring the corresponding NV memory area.
26261 = AR-DdNV: Inconsistent data - Data being restored
26262 = AR-DdNV: Data and backup copy damaged.
26263 = AR-DdNV: Memory has been initialized
26264 = AR-DdNV: Invalid command in command memory
26301 = AR-DdIsaIO: DMIOCTL_II_GETBUFFPOS: Specified data point not found.
26351 = DMIOCTL_IOTIM_START: Specified cycle time invalid.
26401 = Internal error of SPS hardware driver
26450 = AR_DdIO: Basis for I/O device errors.
26451 = AR_DdIO: Ioctl, read, write: Not allowed for I/O device.
26452 = AR_DdIO: Ioctl: Not allowed for data point.
26453 = AR_DdIO: Invalid data type for data point
26454 = AR_DdIO: Data point length doesn't match reference.
26455 = AR_DdIO: Invalid number of elements for data point
26456 = AR_DdIO: Data point not yet found
26457 = AR_DdIO: Data point will never exist (IOMap defines data points that can never be resolved by the driver - HWD)
26458 = AR_DdIO: Data point cannot be opened more than once.
26459 = AR_DdIO: Access type not supported.
26460 = AR_DdIO: Address conflict. Several data points refer to the same address.
26461 = No more registers.
26462 = Data point is supplied via cross-traffic.
26463 = No image address is available for the data point.
26464 = Device not plugged or failed otherwise
26471 = Previous write instruction not concluded
26472 = Size when writing larger than the MTP or the available space in the stream buffer.
26473 = Write access to read-only object
26474 = Read access to write-only object
26475 = The respective frame was larger than the specified read length
26476 = No frame waiting to be read
26477 = Connection to the specified station has been lost
26500 = usbdInitialize error
26501 = Host controller attach error
26502 = Unable to register new client
26503 = Unable to unregister client
26504 = NodeInfo error
26550 = "USB" device driver error base
26551 = usbdInitialize error
26552 = DevCreate error
26553 = DevLock error
26554 = DevLock error.
26600 = AR-DdTCC: Device Driver "TCC" error base
26601 = Internal task class shoveler error
26602 = Internal task class shoveler error
26603 = Mapping of incompatible data types
26604 = Mapping of incompatible data types
26605 = Mapping of incompatible data types
26606 = Invalid data point description in the mapping or in the configuration
26607 = Mapping of incompatible data types
26608 = The transfer of an I/O data point can not be activated due to a missing data point description
26609 = Internal task class shoveler status error
26675 = ETHERNET: IP address error
26980 = ARwin DD16550: Fatal internal error.
26981 = ARwin DD16550: OS port cannot be created
26982 = ARwin DD16550: OS port cannot be deleted
26983 = ARwin DD16550: OS heap cannot be attached
26984 = ARwin DD16550: OS heap cannot be detached
26985 = ARwin DD16550: RSVP send error
26986 = ARwin DD16550: Message send error
26987 = ARwin DD16550: RSVP reply error
26988 = ARwin DD16550: Message receive error
26989 = ARwin DD16550: DeviceInit error
26990 = ARwin DD16550: DeviceDeInit error
27000 = AR registry: Everything OK!
27001 = AR registry: Incorrect path name.
27002 = AR registry: Error during initialization
27003 = Key name not found
27004 = AR registry: Fatal internal error.
27005 = AR registry: No further items.
27006 = Data length transferred is too small.
27007 = AR registry: Invalid KEY handle.
27008 = Entry not available
27009 = Wrong data type entry
27010 = AR registry: Multiple access to a registry entry is not possible.
27011 = AR registry: No memory available.
27012 = AR registry: XML syntax error.
27013 = AR registry: Type of the entered value has changed.
27014 = AR registry: Error saving the remanent registry.
27015 = AR registry: Error loading the remanent registry.
27050 = AR-NvMem: Error base.
27051 = Cannot verify integrety of internal management data of an NV memory block
27052 = An NV memory block with this name does not exist
27053 = An NV memory block with this name already exists
27054 = Not enough DRAM free
27055 = No NV memory available, or too little free
27056 = End of list of NV memory blocks reached
27057 = Error initializing the NV memory block management
27058 = NV memory block cannot be backed up
27059 = Checksum error in NV memory block of a B+R module.
27060 = NV memory (HDD/CF/RAM) has been exchanged
27061 = NV memory (HDD/CF/RAM) has been exchanged
27062 = Not enough DRAM free
27063 = Cannot verify the integrity of NV data of a NV device.
27101 = Socket error
27102 = Socket error
27103 = Socket error
27104 = Socket error
27105 = Socket error
27106 = Socket error
27107 = Socket error
27108 = Socket error
27109 = Socket error
27110 = Socket error
27111 = Socket error
27112 = Socket error
27113 = Socket error
27114 = Socket error
27115 = Socket error
27116 = Socket error
27117 = Socket error
27118 = Socket error
27119 = Socket error
27120 = Socket error
27121 = Socket error
27122 = Socket error
27123 = Socket error
27124 = Socket error
27125 = Socket error
27126 = Socket error
27127 = Socket error
27128 = Socket error
27129 = Socket error
27130 = Socket error
27131 = Socket error
27132 = Socket error
27133 = Socket error
27134 = Socket error
27135 = Socket error
27136 = Socket error
27137 = Socket error
27138 = Socket error
27140 = Socket error
27141 = Socket error
27142 = Socket error
27143 = Socket error
27144 = Socket error
27145 = Socket error
27146 = Socket error
27147 = Socket error
27148 = Socket error
27149 = Socket error
27150 = Socket error
27151 = Socket error
27152 = Socket error
27153 = Socket error
27154 = Socket error
27155 = Socket error
27156 = Socket error
27157 = Socket error
27158 = Socket error
27159 = Socket error
27160 = Socket error
27161 = Socket error
27162 = Socket error
27163 = Socket error
27164 = Socket error.
27165 = Socket error.
27166 = Socket error.
27167 = Socket error.
27168 = Socket error.
27169 = Socket error.
27170 = Socket error.
27171 = Socket error.
27172 = Socket error.
27174 = Socket error.
27175 = Socket error.
27176 = Socket error.
27177 = Socket error.
27178 = Socket error.
27179 = Socket error.
27180 = Socket error.
27181 = Socket error.
27210 = Last send instruction didn't finish
27211 = No receive data present
27212 = A maximum buffer length of 8 kB is allowable for the "mxbuflng" variable.
27220 = No remote station response received.
27221 = Remote station response not received within the timeout period.
27230 = SMTP server not available
27231 = Connection timeout
27232 = The SMTP server returned an unexpected response.
27233 = No ";" in the pReceiver string
27234 = At least one receiver is invalid. Mail was still sent.
27235 = Mail could not be delivered.
27240 = Invalid attachment
27247 = Unable to access device
27248 = Ethernet Manager not started
27249 = Library error mapping: unknown OS error.
27250 = Invalid device string
27251 = Invalid parameter transferred
27301 = AR-SIOS: I/O scheduler initialization error.
27302 = AR-SIOS: Error starting the I/O scheduler.
27303 = AR-SIOS: Error registering with the I/O scheduler.
27304 = AR-SIOS: I/O scheduler client using an invalid subscriber handle.
27305 = AR-SIOS: Error stopping the I/O scheduler.
27306 = AR-SIOS: I/O cycle time violation.
27307 = No input image buffer available.
27308 = Warning: Cycle time violation during boot or in service mode
27309 = AR-SIOS: Failed system tick event.
27310 = AR-SIOS: I/O scheduler request with a task class reference failed.
27320 = For FBs ABDF1MOpen() and ABDF1SOpen(): Parameter timeout has invalid value (< 250 ms)
27321 = Slave sent more than 3 NAKs to the master
27322 = Master sent more than 3 ENQs to the slave
27330 = Invalid frame received
27331 = Invalid checksum in the received frame
27340 = Invalid entry in data object, invalid length of data object or an entry is missing or has an invalid length
27341 = Data object not present
27342 = Invalid EventPV specified in the data object
27343 = Invalid ABDF1 command specified in data object
27344 = Invalid node number specified in the data object
27345 = Invalid LocalPV specified in the data object
27346 = Invalid remote address specified in data object
27347 = Invalid length specified in the data object (ModBus function 5,6 -> length is always 1)
27348 = Invalid file type (remote address) specified in the data object
27351 = Error generating a task class
27352 = Error generating a task class
27353 = Error turning on cycle time monitoring.
27354 = Error turning off cycle time monitoring
27355 = Error while setting the cycle tolerance time of a task class
27356 = Error starting the cyclic section of a task class
27357 = Error stopping the cyclic section of a task class
27358 = Execution of a task class Init program cancelled
27359 = Execution of a task class exit program cancelled
27360 = Task class status transition not allowed
27361 = Invalid task class handle detected
27400 = Base error number.
27401 = Link node does not exist.
27402 = Data type error.
27403 = Link node not open.
27404 = Incorrect function argument.
27405 = Error during open.
27406 = Incorrect context.
27407 = Link node already exists.
27408 = Invalid device
27409 = Faulty transfer direction.
27410 = I/O link already present.
27411 = No free memory
27412 = Unknown code.
27413 = Too many commands.
27414 = Maximum number of connections exceeded.
27415 = No suitable connection.
27416 = Invalid data type.
27417 = Invalid query code.
27418 = Query parameter missing.
27419 = Invalid flag.
27420 = Simulation slave not found.
27451 = AR_PNP: LS187 firmware not found on C:/SYSTEM/ls187.fw
27452 = AR_PNP: LS187 firmware not loaded.
27453 = AR_PNP: Could not read node number.
27500 = AR install error.
27501 = AR install: Module name too long (> 32 characters)
27502 = AR install: Module already exists in the download list
27503 = AR install: Download list entry destroyed
27504 = AR install: Module doesn't exist in the download list
27505 = AR install: Install mode not supported (neither one cycle mode or copy mode)
27506 = AR install: I/O section in "one cycle" mode unequal
27507 = AR install: ID section in "one cycle" mode unequal
27508 = AR install: I/O number in "one cycle" mode unequal
27509 = AR install: Task class in "one cycle" mode unequal
27510 = AR install: Task number (order) in "one cycle" mode unequal
27511 = AR install: PP number in "one cycle" mode unequal
27512 = AR install: SysBus number in "one cycle" mode unequal
27513 = AR install: AVT number in "one cycle" mode unequal
27514 = AR install: AVT entry unequal
27515 = AR install: LOCAL variable unequal
27516 = AR install: GLOBAL variable unequal
27517 = AR install: Install Mode function not possible
27518 = AR install: PV update in "one cycle" mode not possible
27519 = AR install: B&R module error in Copy mode
27520 = AR install: Data type section error in "One cycle" mode
27521 = AR install: Number of PVs in task is different in "One cycle" mode
27522 = AR install: GOT section is different in "One cycle" mode
27523 = AR install: Cyclic task not installed
27524 = AR install: _GLOBAL/_LOCAL PV unequal
27525 = AR install: Dynamic PVs not supported
27550 = ARUSBMAN Error base
27551 = Not enough memory for manager
27552 = RtkCreateFifo error
27553 = DmDeviceOpen error or DdVxUsClient entry missing
27554 = USB device register entry Error
27555 = Could not find handle for USB device
27556 = Handle not available for USB device
27557 = Configured USB device not found
27713 = FBTCPIP: Error in send function.
27900 = Error in asynchronous operation
27901 = Parameter error
27902 = No more IDs available
27903 = Parameter error
27904 = Parameter error
27905 = Parameter error
27906 = No data received
27907 = Internal FBASE error
27908 = Parameter error
27909 = Init-SP calls not yet supported
27951 = Wrong CPU type
27952 = Command FiFo error
27953 = Send task error
27954 = Recv task error
27981 = Initializing eror
27982 = Duplicate node ID
27983 = Wrong revision number
27990 = Send buffer length
27995 = Receive buffer length
27996 = Recv DID
28000 = Base value for respective errors
28016 = Base value for respective errors
28017 = Station drop out
28018 = Cycle time violation (information specifies the actual consumed time in sec).
28032 = Base value for corresponding errors
28033 = IO processor failure
28048 = Base value for corresponding errors
28049 = Measurement range exceeded
28050 = Measurement range not reached
28051 = Sensor disruption
28052 = Short circuit in sensor or output
28053 = Converter hardware disturbance
28058 = Over temperature warning (reserved)
28059 = Over temperature error (reserved)
28060 = Under temperature warning (reserved)
28061 = Under temperature error (reserved)
28062 = Overvoltage warning
28063 = Overvoltage error
28064 = Undervoltage warning
28065 = Undervoltage error
28080 = Base value for corresponding errors
28081 = Channel not supported
28082 = Index not supported
28083 = Amount does not agree with type according to channel and index
28084 = Value range does not agree with type according to channel and index
28085 = Data format does not agree with type according to channel and index
28088 = Command only valid in PREOP mode
28089 = Model not supported
28090 = Register not present
28091 = Invalid type definition in IO configuration
28092 = Offset and length exceed buffer limit
28100 = Invalid Firmware
28101 = Invalid address range
28102 = Programming in progress (not with PSOC)
28103 = Error deleting Flash memory
28104 = Error programming Flash memory
28200 = Syntax error in '_io' data object
28201 = Syntax error in '_io' data object
28202 = Syntax error in '_io' data object
28203 = Syntax error in '_io' data object
28204 = Syntax error in '_io' data object
28205 = Syntax error in '_io' data object
28206 = Syntax error in '_io' data object
28207 = Syntax error in '_io' data object
28208 = Error in the data object entry
28209 = Error in '_io' data object
28210 = Error in '_io' data object
28211 = Syntax error in '_io' data object
28212 = Syntax error in '_io' data object
28213 = Syntax error in '_io' data object
28214 = Syntax error in '_io' data object
28215 = Syntax error in '_io' data object
28216 = Syntax error in '_io' data object
28217 = Syntax error in '_io' data object
28218 = Syntax error in '_io' data object
28219 = Too many '_io' data objects. Maximum 50 allowed.
28220 = IOimage call for creating an IO execution group failed.
28221 = IOimage call for creating an IO execution node failed.
28222 = IOimage call for starting an IO execution group failed.
28223 = IOimage call to wait for the execution of an IO execution group failed.
28224 = Creation of a configuration string for the IO image call or an IO execution node failed.
28225 = Iqinp86 called with an incorrect IO execution group ID
28226 = Iqinp86 called with an incorrect value in the inOut flag
28227 = 'iqintc' or 'iqouttc' task cannot find the 'IQInfo' variable
28228 = Error no longer generated beginning with FlexIQ V1.20!
28229 = Error no longer generated beginning with FlexIQ V1.20!
28230 = Syntax error in '_io' data object
28231 = Syntax error in '_io' data object
28232 = The type of CPU being used does not support FlexIQ!
28233 = Error deleting shovel groups during reconfiguration.
28234 = Error in '_io' data object.
28235 = IOimage - Link call to the IOImage device failed.
28236 = IOimage - IOImage control function call failed.
28237 = Error in '_io' data object.
28238 = X2X slave update needed
28239 = A slave with invalid X2XLink firmware was found on the network and an update was started by the settings in the configuration data object.
28240 = X2XLink firmware update on the slave is done.
28241 = X2XLink firmware update on the slave failed.
28242 = Operating system error.
28243 = A different module type was specified in the Automation Studio configuration than is actually used.
28250 = Automation Runtime is restarted
28251 = Automation Runtime shutdown
28252 = Error response from the UPS
28253 = Internal program error
28254 = Change in DCD detected
28255 = Change in CTS detected
28256 = ups_init not called
28257 = Unknown command or mode.
28258 = 0 was given as the shut down mode. Automation Runtime is not shut down.
28259 = Functions are called in a task class with a cycle time less than 10 ms
28260 = The shutdown message from the UPS was detected. Automation Runtime is shutdown after the shut down time has passed.
28261 = The UPS did not receive an error and is in normal mode (power supply ok)
28700 = Function call error. 
28701 = General error in the Bootserver for terminal mode projects
28702 = Error number of network operation
28703 = An expansion of this type is not present on the terminal.
28704 = A module could not be installed on the terminal.
28710 = Insufficient space in main memory.
28711 = No class with this ID registered.
28712 = Invalid version of data generated by the compiler.
28713 = A required VC module is not on the target system.
28714 = Default setting not available.
28715 = Unable to create Rtk object.
28716 = Could not locate required resource or object.
28717 = Could not register the class with the specified class ID.
28718 = Unable to delete Rtk (operating system) object.
28719 = Data point management error.
28720 = Saved object has incorrect ID.
28721 = Unable to register objects from the container class.
28722 = Unable to update module information.
28723 = Could not create data object for the alarm history.
28724 = Platform initialization error.
28725 = VC: Could not destroy task in the requested time.
28726 = Maximum number of possible VNC clients per visualization reached.
28727 = Could not create control element.
28728 = Data point calculation error
28729 = Unknown hardware found.
28730 = Memory in the historical alarm list cannot save any more snippet data.
28731 = FIFO overflow
28733 = Trend control cannot determine any limits.
28734 = The address of a dynamic PV is not valid
28740 = VC: Error writing or reading the key matrix by the hardware.
28741 = VNC protocol error.
28742 = Class already registered with specified ID.
28744 = Hampshire touch driver error message.
28745 = ELO touch driver error message.
28746 = Gunze touch driver error message.
28747 = Could not store touch calibration data.
28748 = Error in touch manager.
28749 = VC: INA functions not found
28751 = Error insert text resources
28760 = The calibration data could not be found.
28780 = VC: No keys defined in current key layout
28781 = VC: Snippet not found
28783 = VC: VC debug modules being used
28798 = VC: Terminal error (boot client error)
28800 = Base Error
28801 = MCImage: MemCard invalid
28802 = MCImage: CPU type invalid
28803 = MCImage: Valid memory image not present on this MemCard
28804 = MCImage: Error writing to SRAM
28805 = MCImage: Error writing to FLASH
28806 = MCImage: Error deleting FLASH
28807 = McImage: Copy to MemCard failed
28808 = McImage: Failed to update target
28809 = McImage: Invalid mode setting
28819 = McImage: Target has been updated - automatic cold restart
28820 = Parameter error
28821 = Parameter error
28822 = Parameter error
28823 = Parameter error
28824 = Parameter error
28825 = No L2DP slave module.
28826 = Not yet in data transfer mode
28827 = L2DP doesn't have enough memory.
28828 = Internal state machine error.
28829 = Invalid node number.
28830 = Maximum output data length exceeded
28831 = Maximum input data length exceeded
28832 = Maximum input/output data length exceeded
28850 = Invalid device
28851 = Invalid ordinal number
28852 = Invalid parameter for calling HwSetBeep()
28900 = Function called with invalid ident
28901 = Function called with invalid address of data object name or data object not found in automation target system
28902 = 0 transferred instead of "imaInfoStruct" structure address
28903 = Syntax error in configuration data object
28904 = Incorrect keyword in configuration data object
28905 = Incorrect name in configuration data object
28906 = Invalid value in configuration data object
28907 = Not enough data specified for a service in the configuration data object
28908 = Too few INA connections configured
28909 = Max. number of variable services in configuration data object reached
28910 = Maximum number of PV sections in a configuration data object reached
28911 = Reached max. number of services for BR modules in a configuration data object.
28912 = Could not determine process variable address
28913 = Incorrect process variable length
28914 = IMA function called in task with cycle time less than 10 ms
28915 = Could not allocate necessary temporary memory on the automation target system
28916 = Temporary allocated memory could not be freed up
28917 = Internal error evaluating the configuration data object
28953 = No HWD header
28954 = No free memory for HWD or parameters.
28956 = HWD file not found
28957 = Error - HWD XML Init
28958 = Invalid direction specified
28959 = HWD parameter error
28960 = HWD entry not found
28961 = ID attribute missing
28962 = HWD entry ignored
28963 = HWD module not found
28965 = Parameter name missing
28966 = Invalid data type for parameter
28967 = Obsolete STRING attribute for parameter
29000 = Device doesn't exist or device not configured
29001 = FBK "pDevice" parameter invalid (e.g. pDevice = 0)
29002 = FBK "Option" parameter invalid
29003 = Invalid FBK parameter, error text depends on the function block.
29004 = Parameter can't be set (e.g. subnet mask)
29005 = Error in the AR registry
29006 = INA device does not support INA node numbers (e.g. IF1 = RS232)
29007 = Initialization error on FTP server.
29008 = Shutdown error on FTP server.
29009 = Default gateway not defined
29010 = Could not start SNTP server.
29011 = Could not start the SNTP server.
29012 = Invalid FBK parameter - values from 1 to 60 are valid.
29013 = Unexpected system error
29014 = The time zone cannot be read or set.
29015 = Invalid FBK parameter
29016 = Invalid domain.
29017 = Invalid default user
29018 = INA node number could not been set.
29019 = Invalid buffer for the default password
29020 = DHCP server already running
29021 = Buffer for interface list too small
29022 = Array is too small and can't hold all leases
29023 = Lease already exists
29024 = Timeout must be larger than 300 or -1 (=infinite)
29025 = DHCP server is not configured
29026 = Function of sdm not found.
29027 = NV data can't be deleted
29028 = Function not found in system
29050 = invalid device
29068 = logbook entry format partition
29069 = logbook entry create partition
29070 = Memcard erased
29071 = Error erasing Memcard
29101 = HWScript: Null pointer error
29102 = HWScript: Syntax error in command
29103 = HWScript: wrong channel
29104 = HWScript: not supported command
29105 = HWScript: Timeout during access to the module
29106 = HWScript: Name of parameter missing
29107 = HWScript: Access to register failed
29200 = The axis object is invalid.
29203 = Drive is not ready.
29204 = Invalid parameter number.
29205 = The axis is not homed.
29206 = The controller is off.
29207 = This movement type is currently not allowed.
29208 = The axis object was changed since last FB call.
29209 = The drive is in error state.
29210 = Parameter initialization (Global-init) failed.
29211 = Switching the motor holding brake not possible. Controller is on.
29214 = Homing not possible.
29215 = Discrete movement not possible.
29216 = Continuous movement not possible.
29217 = Invalid input parameter.
29218 = Unknown PLCopen axis state.
29219 = Invalid PLCopen parameter value.
29221 = No cam name.
29222 = Error at cam download.
29225 = The target position is outside the axis period.
29226 = Error on drive. Use MC_(BR)_ReadAxisError for details.
29227 = No further master position can be sent on the network from this drive.
29228 = No further master position can be read from the network by this drive.
29229 = Synchronized movement not possible.
29230 = Internal error: Error at parameter list transfer.
29231 = The master velocity is invalid, 0 or negative.
29232 = Internal error: Invalid SPT resource type.
29233 = SPT resource of required type not available.
29234 = Internal error: Number of requested SPT resources is not available.
29235 = The functionality is not available for the current axis type.
29237 = Error in TriggerInput parameters.
29238 = The FB cannot be used in the current state.
29239 = This functionality is not available for this network.
29240 = The specified ParID can't be used because of the data type size.
29241 = Wrong data type for specific ParID.
29242 = Cyclic read data full.
29244 = Internal error during configuration of cyclic data.
29246 = TouchProbe window invalid.
29247 = Master sync position cannot be reached.
29250 = CamTableID is invalid.
29251 = Error at parameter table download.
29252 = Error at parameter list initialization.
29253 = Error at parameter sequence download.
29254 = Error at parameter sequence initialization.
29255 = Initialization not possible, axis coupling is active.
29256 = Multiple commands not possible at the same time.
29257 = The specified data address is invalid.
29260 = No data object name specified.
29261 = Invalid data object index.
29262 = Send channel already in use.
29263 = Slave channel already in use.
29264 = Cyclic write data full.
29265 = Communication to drive failed.
29266 = The MasterParID was changed since last FB call.
29267 = Invalid number of cam profile polynomials.
29268 = FB aborted by another one.
29269 = Error during saving of the NC-INIT parameter module.
29270 = Error during loading of the NC-INIT parameter module.
29271 = Selected MC_TouchProbe function block is not active.
29272 = Error at initialization of Automat.
29273 = The given "Subject" is invalid.
29274 = Error at initialization of parameters. Use MC_ReadAxisError for details.
29275 = At least one input value was changed while "Enable = TRUE".
29276 = A phase shift is already in progress.
29277 = A offset shift is already in progress.
29278 = No period for axis, master, slave or FB input defined.
29279 = Output value cannot be calculated.
29280 = No valid master defined.
29281 = This functionality is not available for ACOPOSmulti drives.
29282 = Command currently cannot be executed.
29283 = Master or slave position of the first cam profile point not equal to 0.
29284 = Too few curve points.
29285 = Invalid cam profile section type.
29286 = Invalid mode for the last cam profile point.
29287 = Invalid master or slave position for last cam profile point.
29288 = Master positions are not strictly monotonic increasing.
29289 = Invalid boundary parameters.
29290 = Too many cam profile polynomials.
29291 = Turning point outside of cam profile section.
29292 = Identical slave positions not permitted.
29293 = Specified data length is 0 or too low.
29294 = Not able to determine error text. See error text string for details.
29295 = An error has occurred. See "ErrorRecord" output for details.
29296 = Not enough space in Broadcast channel.
29297 = Problem with variable in permanent memory.
29298 = Error in network configuration.
29299 = Error occurred during the setup operation.
29300 = Invalid number of polynomials in the cam.
29301 = No cam value can be calculated.
29302 = One instance of the function block is already active on this axis.
29303 = Specified IntervalTime too small.
29304 = This functionality is not available for ACOPOS.
29305 = ParID cannot be read in this mode.
29306 = Invalid interpolator mode.
29307 = Master period is zero.
29308 = Internal calculation error.
29309 = General internal error.
29310 = Calculated Compensation exceeds limit values.
29311 = Maximum time expired.
29312 = An error occurred during the holding brake test.
29489 = Internal values of the axis structure are invalid.
29490 = Error at internal initialization (global init).
29491 = Error at internal initialization (software limits).
29492 = Error at internal initialization (homing of virtual axis).
29498 = ACP10_MC library: Initialization aborted
29499 = ACP10_MC library: Error with details in "ASCII data"
29740 = AR-DNS resolver: Initialization errors
29741 = AR-DNS resolver: Parameter changed
29750 = System error
29751 = Parameter error
29752 = Parameter error
29753 = Parameter error
29754 = Status message
29755 = Status message
29800 = Base error for boot files update
29801 = Boot update ok
29802 = File update ok
29803 = File update failed (Write)
29804 = File update failed (Open)
29805 = Wrong target for this update
29806 = Wrong target for this update
29850 = Current target not supported by this library
29851 = Invalid security level
29852 = General error setting Security Level
29853 = Security Level setting ok
29900 = Initialization error.
30000 = General error from the X2XLink I/O system timer
30001 = Information: System synchronized to X2XLink
30002 = Error opening the associated X2XLink device
30010 = General error from the POWERLINK I/O system timer
30011 = Information: System synchronized to POWERLINK
30021 = Difference between configured and inserted module
30022 = Configured module inserted
30023 = Configured module not found during boot
30024 = Module removed while running
30025 = Module in an unknown state
30026 = Error generating device
30027 = Error loading firmware file
30028 = Carried out reboot
30029 = AR "power cycle" necessary
30030 = Could not start AR I/O Management master
30031 = INA node number permanently configured with software
30032 = AR-Pnp: Firmware update
30033 = Unknown hardware module
30050 = Data object doesn't exist
30051 = Invalid station number
30052 = Invalid timeout time or timeout time exceeded
30053 = Invalid or unsupported checksums
30054 = Invalid ident
30055 = Device already being used as a master/slave. Using a master and slave on one device at the same time is not supported.
30060 = Incorrect entry or format in data object
30061 = Invalid EventPV specified in the data object
30062 = Invalid command or function code specified; command not supported
30063 = Invalid station number specified; broadcasts not supported
30064 = Invalid LocalPV specified in data object
30065 = Invalid remote addressing in data object
30066 = Invalid length specified in data object
30070 = Error receiving a frame (FRM_read())
30071 = Error in buffer return (FRM_rbuf())
30072 = No write buffer available (FRM_gbuf())
30073 = Error writing a frame (FRM_write())
30074 = Error closing the interface (FRM_close())
30075 = Error closing the interface (FRM_close())
30080 = Invalid frame (no DF1 protocol)
30081 = Invalid request (COMMAND) or error executing command
30082 = Invalid response (REPLY)
30083 = Max. number of NAKs reached
30084 = Max. number of ENQs reached
30085 = No memory available for driver management or error freeing up memory.
30150 = Internal error
30151 = Data point with specified name not found
30170 = Internal error
30171 = Installation error
30172 = Uninstallation error
30173 = Error during copying
30174 = Module does not exist
30175 = Incorrect module type
30176 = Invalid Name
30177 = Module already exists with this name
30190 = Internal error
30191 = I/O module does not exist
30192 = Incorrect channel name specified
30193 = Timeout reached
30194 = Function block not supported.
30195 = Invalid parameter.
30196 = Asynchronous access error
30200 = Invalid device string or device not an Ethernet interface
30201 = Invalid protocol (ether_type) or protocol already being used.
30202 = Invalid ident
30203 = Invalid FBK parameter
30204 = Invalid length specification
30205 = Could not send Ethernet packet
30206 = No Ethernet packet received
30250 = POWERLINK: Basis for AR I/O management POWERLINK driver error
30251 =  POWERLINK: Invalid node number.
30252 =  POWERLINK: Incorrect operating mode for interface.
30253 =  POWERLINK: Conflict with POWERLINK synchronization mode setting
30254 =  POWERLINK: Incorrect operating mode
30255 =  POWERLINK: Invalid cycle time
30256 =  POWERLINK: Interface setting after system boot
30257 =  POWERLINK: Internal error in the driver
30258 =  Receive hook function has already been set.
30259 =  POWERLINK: Buffer not available
30260 =  POWERLINK: Error sending a buffer
30261 =  POWERLINK: Error in the firmware file
30262 =  POWERLINK: Interface not initialized
30263 =  POWERLINK: Setting for poll response size too high
30264 =  POWERLINK: Station on the net is larger than configured.
30265 =  POWERLINK: Output size of the station on the network doesn't match the configuration.
30266 =  POWERLINK: Input data of the station on the network is smaller than configured.
30267 = Conflict with POWERLINK I/O bus parameters
30268 = POWERLINK: Error at allocating the station from the interface firmware
30273 = POWERLINK: MAC Address could not be read from hardware
30280 =  POWERLINK: 2003 nodes not connected - different HW configuration
30281 =  POWERLINK: Object not accessable in object dictionary of station
30285 = Interface card error on POWERLINK bus controller
30286 =  POWERLINK: Station driver encountered an error while reading the SDO of a Controlled Node.
30287 =  POWERLINK: Station driver encountered an error while writing to the SDO of a Controlled Node.
30298 = Error at writing POWERLINK SDO parameter
30300 = Base value for X2XLink driver errors.
30301 = Error creating the X2X station in the system structures.
30302 = X2XLink interface parameter error.
30303 = X2XLink firmware update.
30304 = Error synchronizing the system and X2XLink cycle.
30305 = Error when updating firmware for an X2XLink station.
30310 = Invalid node number.
30311 = AR-X2X: Node ID already exists
30312 = AR-X2X: Conflict with node ID
30313 = No X2XLink station configured with this node number.
30314 = Invalid X2XLink channel number.
30315 = AR-X2X: Channel already open
30316 = AR-X2X: Channel not open
30317 = AR-X2X: Error creating a register
30320 = Incorrect X2XLink module state.
30321 = AR-X2X: Unknown command
30322 = Action already active on X2XLink module.
30323 = Incorrect parameters for action on X2XLink module.
30330 = Incorrect X2XLink cycle time.
30331 = Invalid number of X2XLink stations.
30332 = Size of the synchronous X2XLink frames.
30333 = Insufficient size for asynchronous X2XLink frames.
30334 = X2XLink with these settings can only be operated with asymmetrical input/output sizes.
30335 = X2X module doesn't support the configured cycle time.
30336 = X2X module doesn't support asymmetrical input/output sizes.
30337 = AR-X2X: X2X module found with old FPGA version.
30338 = Size of asynchronous frame too small for station
30339 = Limit for stations at interface lower than number of configured stations
30344 = AR-X2X: ASIC-Version not supported for current setting
30345 = AR-X2X: Stationnumber set by hex switch not unique
30346 = NIL pointer with X2XLink function.
30347 = Error initializing X2XLink synchronization.
30348 = AR-X2X: Conflict between ASIC and FPGA versions
30349 = Internal X2XLink error.
30350 = Communication error
30351 = Communication error
30352 = Communication error
30353 = Communication error
30354 = Communication error
30360 = IRQ profiling error (obsolete beginning with Profiler version 4.00.0 - AR V2.85)
30361 = IRQ profiling error (obsolete beginning with Profiler version 4.00.0 - AR V2.85)
30362 = IRQ profiling error (obsolete beginning with Profiler version 4.00.0 - AR V2.85)
30363 = IRQ profiling error (obsolete beginning with Profiler version 4.00.0 - AR V2.85)
30370 = PLC task profiling error (obsolete beginning with Profiler version 4.00.0 - AR V2.85)
30371 = PLC task profiling error (obsolete beginning with Profiler version 4.00.0 - AR V2.85)
30372 = PLC task profiling error
30380 = OS task profiling error (obsolete beginning with Profiler version 4.00.0 - AR V2.85)
30381 = OS task profiling error (obsolete beginning with Profiler version 4.00.0 - AR V2.85)
30382 = OS task profiling error (obsolete beginning with Profiler version 4.00.0 - AR V2.85)
30383 = OS task profiling error (obsolete beginning with Profiler version 4.00.0 - AR V2.85)
30384 = OS task profiling error
30390 = FUNCTION profiling error (obsolete beginning with Profiler version 4.00.0 - AR V2.85)
30391 = FUNCTION profiling error (obsolete beginning with Profiler version 4.00.0 - AR V2.85)
30392 = FUNCTION profiling error (obsolete beginning with Profiler version 4.00.0 - AR V2.85)
30393 = FUNCTION profiling error (obsolete beginning with Profiler version 4.00.0 - AR V2.85)
30400 = Backup error
30401 = Status error.
30402 = Status error.
30403 = Status error.
30404 = Status error.
30405 = Installation error
30406 = Data object error
30407 = Definition module error.
30408 = Data object error
30409 = Installation error (obsolete beginning with Profiler version 4.00.0)
30410 = Installation error (obsolete beginning with Profiler version 4.00.0)
30411 = Installation error (obsolete beginning with Profiler version 4.00.0)
30412 = Status error.
30413 = Installation error
30414 = Installation error
30415 = Installation error
30416 = Definition module error.
30417 = Data object error
30418 = Data object error
30419 = Data object error
30420 = Archive error
30421 = Archive error
30422 = Archive error
30423 = Backup error
30424 = Installation error
30425 = Installation error
30428 = Invalid data module.
30451 = Fatal firmware error - 2003 I/O connection
30452 = Internal error - 2003 I/O connection
30453 = Faulty parameters - 2003 I/O connection
30475 = Error initializing the asynchronous 2003 I/O connection interface
30476 = Initialization of PNP structures for 2003 I/O connection
30477 = Error configuring the 2003 I/O registers
30478 = Initialization of slot structures for 2003 I/O connection
30479 = Error detecting hardware on the 2003 I/O connection
30480 = Activation of 2003 I/O connection firmware failed
30499 = Internal debug info
30500 = Cannot create memory partition
30501 = Cannot free up memory partition
30502 = Cannot allocate memory block with requested size
30503 = Cannot free up memory block
30504 = Cannot determine information about available memory.
30550 = Invalid pointer given
30551 = Raw value outside the valid range
30552 = Division by 0
30553 = Result limited to the data type maximum
30554 = Result limited to the data type minimum
30571 = Could not find (open) configuration file.
30572 = Could not allocate memory.
30574 = Invalid configuration handle.
30575 = Could not save sections locally
30576 = Specified interface not configured as DHCP client
30590 = Log file already open.
30591 = Log file not open.
30600 = Could not initialize XML parser.
30601 = Could not find configuration for the target (node number or MAC address).
30602 = Incorrect header in configuration file.
30603 = Not used at this time
30604 = XML coding error in locally saved file.
30605 = XML fatal error
30610 = Unknown archive.
30611 = Invalid archive ID
30612 = Could not allocate temporary memory.
30613 = Could not open file on target
30614 = Could not write to file on target
30615 = Error reading from archive
30620 = Partition error (size specification); Corrected size of the listed (logfile) partition
30621 = Partition error (number of partitions and partition sizes); Listed partition removed (not created)
30630 = Error opening the archive or zipped file.
30631 = Error opening the local file
30648 = Netboot OK
30649 = Netboot error - see info (error number is shown in Hex format)
30651 = Fdisk error
30652 = Fdisk error
30653 = Fdisk error
30654 = Fdisk error
30655 = Fdisk error
30656 = Fdisk error
30657 = Fdisk error
30658 = Fdisk error
30659 = Fdisk error
30660 = Fdisk error
30661 = Fdisk error
30662 = Fdisk error
30663 = Fdisk error
30701 = No memory available.
30702 = Invalid protocol.
30703 = Not initialized.
30704 = Critical section.
30710 = Invalid directory.
30711 = Invalid directory.
30712 = Invalid directory.
30720 = Device link.
30721 = Device unlink.
30722 = Invalid device.
30730 = Invalid file.
30731 = Invalid file.
30732 = Invalid file.
30733 = No file handle.
30734 = IOctl error.
30735 = Invalid file.
30736 = Invalid file.
30751 = DdxxIoLSWD: Watchdog has been triggered
30752 = Watchdog hardware I/O registers don't work
30753 = PCI monitoring hardware I/O registers don't work
30760 = Reading point not found
30801 = Not enough memory to process the information
30802 = Invalid ID
30803 = Index out of range [0..nrEntries-1]
30804 = Unknown infoCode parameter
30805 = Unknown infoKind parameter
30810 = Invalid HWC file
30811 = Error performing SDO access to a slave.
30812 = A CANopen slave defined as "Mandatory" could not be configured during the network boot.
30813 = Not all slaves could be configured by the master in the specified time when the CANopen network was started.
30814 = No heartbeat or LifeGuarding monitoring configured.
30815 = A CANopen slave defined as "Mandatory" could not be set to <operational> during the network boot.
30816 = Configuration error
30817 = Internal error
30818 = Fatal error during boot
30819 = Unsupported object in the HWC
30820 = Emergency message received
30821 = All slaves put into <Stopped> state
30822 = Error allocating memory
30823 = Error constructing the object directory
30824 = Error generating a logger task
30840 = Selected device not found.
30841 = Could not open selected device.
30842 = Invalid pointer (NULL).
30843 = Invalid CAN node number (0 <= NodeID <= 127).
30844 = Internal error in library while executing a CANopen function block.
30845 = Invalid CAN COB ID.
30846 = Invalid amount of data specified
30847 = No further CANopen packet available
30851 = Invalid device
30852 = Device error
30853 = Device error
30854 = Parameter error
30855 = Parameter error
30856 = Parameter error
30857 = Parameter error
30858 = Parameter error
30859 = Parameter error
30860 = Parameter error
30901 = Configuration error
30902 = Could not address I/O channel
30905 = Error regarding info channels
30906 = Firmware update
30950 = Base error AC14x/EC21 I/O
30951 = Internal error AC14x/EC21 I/O
30960 = Configuration parser: Basis configuration parser error numbers
30961 = Module not found
30962 = Error inserting to the hardware tree
30963 = Name exists more then once
30964 = Configuration parser: CPU mismatch
30965 = No name specification
30966 = Error in XML header
30967 = Configuration parser: No node section available
30969 = Parser initialization failed
30970 = No memory available
30971 = No root entry available
30972 = No HWD information available
30973 = Cannot insert module
30974 = CIR configuration parser: Different number of entries
30975 = CIR configuration parser: Module not compatible
30976 = CIR configuration parser: Error opening device
30977 = CIR configuration parser: CIR not supported
30978 = CIR configuration parser: No device connected
30979 = CIR configuration parser: I/O control error
30980 = Configuration parser: Different sizes
30981 = CIR configuration parser: Channel description in configuration not supported
30982 = CIR configuration parser: XLink / QLink error
30983 = CIR configuration parser: XLink/QLink source not found
30984 = CIR configuration parser: Restart required
30985 = CIR configuration parser: No old configuration found
30986 = CIR configuration parser: Configuration installation already active
30987 = CIR configuration parser: Node name changed
30988 = CIR configuration parser: Current configuration is not active
30989 = CIR configuration parser: Invalid installation mode
30990 = SNTP: Connection to server lost, time synchronization with RTC
30991 = SNTP: Server connection restored, time synchronization with NTP server
30992 = SNTP: The time server has been changed.
30993 = Time jump - software time
30994 = Time synchronization failed
30995 = Time offset has changed due to automatic daylight savings time.
30996 = Automatic daylight savings time was activated/deactivated.
31000 = Profiler inactive
31001 = Profiler is running
31002 = Profiler not running.
31003 = Profiler not ready for start.
31004 = No temporary memory.
31005 = Could not read cyclic task table.
31006 = Could not initialize log buffer.
31007 = Could not create definition module.
31008 = Error reading from definition module.
31009 = Could not install data object.
31010 = No data object present.
31011 = Archived module with the same name already exists.
31012 = Error creating an archived module.
31013 = Error deleting an archived module.
31014 = Could not create data object (too large).
31015 = Error when starting
31016 = Error when stopping profiling
31017 = Error reading from data object
31018 = Incorrect context.
31019 = Invalid data module.
31050 = Invalid parameter.
31101 = Watchdog
31102 = Hardware error.
31120 = Error creating initialization data.
31121 = Error in the response to the initialization data.
31122 = Error on the WINIO server.
31123 = Error in the hardware configuration.
31124 = Newest version of WinIO protocol is not supported.
31125 = Connection denied
31126 = Connection lost
31127 = Connection established.
31140 = Invalid axis object.
31141 = Invalid interface ID.
31142 = Invalid command.
31143 = "cis_vf" module not installed.
31144 = "cis_ps" module not installed.
31145 = Uart already open.
31146 = Not enough TMP RAM memory available.
31147 = Axis table error.
31148 = Interface table error.
31149 = General error initialization parameter data object.
31150 = Illegal object.
31151 = Incorrect object type.
31152 = Invalid parameter (null pointer).
31153 = Data object not found.
31154 = Invalid initialization parameter data object length.
31155 = General error opening operating system module.
31156 = Illegal object.
31157 = Incorrect object type.
31158 = Invalid parameter (null pointer).
31159 = Data object not found.
31160 = Invalid version of the "cis_vf" module.
31161 = Invalid version of the "cis_osvf" module.
31162 = Invalid version of the "cis_ps" module.
31163 = Invalid version of the "cis_osps" module.
31170 = Error when starting the FTP server
31171 = Fehler beim Stoppen des FTP Server
31172 = Error in user configuration
31240 = AR logger API error number base
31241 = AR logger initialization failed.
31242 = Failed to load the existing AR logger modules.
31243 = Error allocating a log VW unit.
31244 = Invalid log handle specified.
31245 = Log module not present.
31246 = Log module already exists.
31247 = Error installing a new log module.
31248 = General create error.
31249 = No memory for VW.
31250 = General delete error.
31251 = Incorrect length specified.
31252 = Log data length of a queued entry.
31253 = Error calculating referencing data.
31254 = Read buffer too small.
31255 = Invalid buffer specified.
31256 = Invalid index specified.
31257 = Invalid log entry read.
31258 = No additional entry available.
31259 = Buffer too small for binary log data.
31260 = Buffer too small for ASCII log data.
31261 = General resize error.
31262 = Cannot set new log data length.
31263 = Cannot set new log data length.
31264 = Error adding to NV-LOG-VW list.
31265 = Access to AR logger base modules not allowed.
31266 = Critical function active.
31280 = AR logger module created
31340 = Base for errors in the ASEPL library.
31341 = Error accessing the specified POWERLINK interface device.
31342 = Function can only be executed on an MN (managing node).
31343 = Function can only be executed on a CN (controlled node).
31344 = Read or write access failed. See errorinfo for precise cause of error.
31345 = Input parameters outside of permitted value range
31346 = Specified index already exists.
31347 = Specified subindex already exists.
31348 = Specified index does not exist.
31349 = Specified subindex does not exist.
31392 =  A Zero-Pointer was given to the Data buffer.
31399 = Error code for non-implemented functionality.
31400 = Invalid log name specified.
31401 = Incorrect memory type specified.
31402 = Incorrect log level specified.
31403 = Invalid parameters specified.
31404 = Invalid length specification.
31405 = Log module already exists.
31406 = General AsArLogCreate error.
31407 = Error installing a new log module.
31408 = Access to base log modules denied.
31409 = Another critical FBK active.
31410 = Invalid ident specified.
31411 = General AsArLogDelete error.
31412 = No buffer for AsArLogReSize.
31413 = General AsArLogReSize error.
31414 = New log data length cannot be set for AsArLogReSize.
31415 = New log data length cannot be set for AsArLogReSize.
31416 = Log module does not exist.
31417 = General AsArLogWrite error.
31418 = Error calculating referencing data.
31419 = General AsArLogRead error.
31420 = Invalid buffer specified.
31421 = Invalid index specified.
31422 = Invalid log entry read.
31423 = Buffer too small for binary log data.
31424 = Buffer too small for ASCII log data.
31425 = No more log entries present.
31500 = PROFIBUS master driver error
31501 = PROFIBUS master driver error
31502 = PROFIBUS master driver error
31503 = PROFIBUS master driver error
31504 = PROFIBUS master driver error
31505 = PROFIBUS master driver error
31506 = PROFIBUS master driver error
31507 = PROFIBUS master driver error
31508 = PROFIBUS master driver error
31509 = PROFIBUS master driver error
31510 = PROFIBUS master driver error
31511 = FBK PROFIBUSSlaveStat error
31512 = Block returns timeout
31513 = Resource is not available 
31514 = Master function is not activated on the PROFIBUS slave 
31515 = No response data from the PROFIBUS slave
31516 = Station doesn't respond
31517 = Master not in the token ring
31518 = Remote partner not responding
31519 = Negative response received.
31520 = Device stopps DVP1 communication
31521 = DVP1 communication stopped automatically
31522 = Previous service still running
31523 = Size of length indicator exceeded
31524 = Faulty parameter
31525 = FBK PROFIBUSDPV1AlarmReset error
31526 = FBK PROFIBUSDPV1AlarmReset error
31527 = FBK PROFIBUSDPV1AlarmReset error
31528 = FBK PROFIBUSDPV1AlarmReset error
31529 = Unknown command.
31530 = FBK PROFIBUSSlaveStat error
31531 = FBK PROFIBUSDPV1AlarmReceive
31540 = The device could not be found.
31541 = The device could not be opened
31542 = Null pointer access.
31543 = Internal error.
31544 = Invalid remote address specified
31545 = Invalid remote address specified
31546 = FBK PROFUBSSlaveStat error status
31547 = FBK PROFIBUSDPV1AlarmReset error status
31548 = FBK PROFIBUSDPV1AlarmReset error status
31549 = FBK PROFIBUSDPV1AlarmReset error status
31550 = Tn < dt (=cycle time)
31551 = base = 0
31552 = ident invalid
31553 = LoopConR: Specified mode is invalid. LoopCont: Specified out_mode is invalid.
31554 = Parameter data indicated as invalid by LCPIDpara()/LCRPIDpara().
31555 =  <p style="background-color: #C0C0C0">Error description
31556 = Invalid value for d_mode
31557 = dy_max < 0
31558 = Invalid value for fbk_mode
31559 = Specified tuning mode invalid.
31560 = X < X_min OR X > X_max
31561 = W - X > de_min
31562 = Error determining the slope of the controller value.
31563 = Null pointer specified.
31564 = Y_min or Y_max was changed during tuning.
31565 = LoopConR: Temp_set < Temp_amb LoopCont: xsetvalue1 > xsetvalue2
31566 = LoopConR: pSettings = 0 LoopCont: basetime > dt (=cycle time)
31567 = NOT(Kp_h > 0) OR NOT(Kp_c > 0)
31568 = pSettings = 0
31569 = Invalid operating mode entered.
31570 = dt = 0?
31571 = tKnick >= tAlt
31572 = tAlt invalid.
31573 = One or more power values incorrect.
31574 = Incorrect input for n.
31600 = Error initializing the communication manager for socket operation on the PX32.
31601 = Error in the communication manager for socket operation on the PX32.
31602 = Error initializing the communication manager for socket operation on the PX32.
31603 = Error initializing the communication manager for socket operation on the PX32.
31604 = Error initializing the communication manager for socket operation on the PX32.
31605 = Error initializing the communication manager for socket operation on the PX32.
31651 = Unable to allocate memory
31652 = Cannot create/initialize event
31653 = Task/Thread cannot be created or started.
31654 = Cannot create synchronization object
31655 = File cannot be created or edited.
31660 = Specified options or parameters not supported.
31661 = Specified option or parameter has an invalid length.
31662 = Invalid option or parameter specified.
31663 = Invalid name during registration.
31664 = Incorrect function used in server/client for this object.
31665 = Invalid data sent/received
31666 = Fatal internal error
31667 = Invalid ANSL stack configuration
31668 = Version conflict
31669 = Invalid optional module
31670 = Could not find application module
31680 = Internal connection error / Connection closed
31681 = Connection timeout
31682 = Establishing connection - Login error
31683 = Connection error / Connection closed
31685 = Received data incomplete
31686 = Received data invalid
31687 = Protocol error
31690 = Wrong version of the socket library
31691 = Error in communication structure
31692 = Error in communication structure
31694 = Error in communication structure
31695 = Error in communication structure
31696 = Error in communication structure
31697 = Error in communication structure
31701 = Object deleted
31702 = Undefined object
31703 = Object not ready
31704 = Faulty BR module checksum.
31750 = Unsupported object in use
31751 = Unsupported service in use
31752 = Invalid ANSL object hierarchy
31753 = Using an object that is currently not available
31754 = Invalid object in use
31756 = Unable to abort transmit request
31758 = The transmit request to be entered is already being used.
31759 = Created object already exists
31800 = Unable to install BR module
31801 = Checksum error
31803 = The specified time or date is not valid.
31804 = Unable to delete module
31805 = Unable to upload module
31806 = Unable to download module
31807 = Unable to read module or library list
31808 = Unable to read PV list
31809 = Unable to read global PV list
31810 = Access to local PV failed
31811 = Write access prohibited
31812 = Unable to create module
31813 = Target system restart necessary
31814 = Service only allowed in diagnostics mode
31815 = Memory not available or cannot be deleted.
31816 = The specified status is incorrect.
31817 = Unable to create PV object
31818 = Access to global PV failed
31819 = Invalid target memory or not enough target memory available
31820 = Access not permitted in PLC diagnostic mode
31821 = Error reading dongle list
31822 = Error reading license list
31823 = Error reading license context
31824 = Error performing license update.
31825 = Error operating dongle LED
31826 = Error executing redundancy service
31827 = Error executing redundancy service
31828 = Error executing redundancy service
31829 = Error triggering manual failover
31830 = Error during application synchronization
31831 = Error registering a new TracePoints list.
31832 = Error enabling new TracePoints list.
31833 = Error deregistering TracePoints list.
31834 = Error reading TracePoint data
31835 = Unable to create "table of contents"
31836 = Dynamic PV is zero (not initialized)
31837 = Uninstalling/Deleting the module is not allowed.
31838 = Error deleting a module
31839 = Connection identified as redundancy-relevant
31840 = Connection identified as not redundancy-relevant
31841 = Invalid index specified when reading the logger
31870 = Invalid parameter specified
31871 = Failed to initialize XML parser
31872 = XML data invalid
31873 = Specified data object not available
31874 = Specified ANSL client not available
31875 = Specified ANSL connection not available
31876 = Specified PV link not available
31877 = End of list reached
31880 = Invalid XML element
31881 = Invalid XML attribute
31882 = XML attribute missing
31883 = Local PV not found
31884 = Remote PV not found
31885 = Diagnostic PV not found
31886 = PV link data type mismatch
31887 = Invalid default value
31888 = Invalid synchronous PV
31889 = Limit for synchronous PVs reached
31900 = The object is not supported by the current implementation.
31901 = The requested service is not supported, or a parameter is incorrect.
31902 = The object hierarchy isn&apos;t right or the parent doesn&apos;t support child objects of the specified type.
31903 = Unknown object in the "ANSLUIF" management layer.
31904 = Object invalid in "ASNSLUIF" management layer.
31905 = Preceding similar job not yet processed.
31906 = The function is not permitted to be called for the object in the current state.
31907 = Invalid length of specified data
31908 = The system/PC does not have enough memory to complete the action.
31909 = The data does not correspond to the expected format.
31910 = The ANSL router is not started.
31911 = ANSL router was disabled or not started.
31912 = The PV format is not known.
31913 = An object with the same name already exists.
31914 = Function can only be called for a redundancy-capable "ANSLUIF" library.
31915 = The configuration of the PV object is incorrect.
31925 = Connection not returning redundancy information
31926 = Redundancy information incomplete
31927 = Access to inactive CPU denied
31950 = Invalid device.
32000 = Invalid device.
32050 = The EIPInit() FBK writes logbook messages with this number in the logbook.
32051 = Out of memory. The library cannot be executed.
32052 = Configuration data object error. The STRING variable connected to the "extstatus" output in EIPInit() indicates the location of the error as well as a detailed error description.
32053 = Illegal input parameters connected to the FBK.
32054 = The Ethernet interface doesn't exist or returns an error.
32071 = Error reading the serialized I/O resource.
32101 = Error initializing the XLink task.
32102 = Error starting the XLink task.
32103 = Error starting or stopping the XLink task.
32104 = Invalid XLink handle.
32105 = Error stopping the XLink task.
32106 = Error activating cycle time monitoring for the XLink task.
32150 = Base number for errors in the AR I/O Management POWERLINK-V2 driver.
32151 = Maximum number of POWERLINK-V2 interfaces exceeded.
32152 = POWERLINK-V2 stack initialization error.
32153 = POWERLINK V2: ResetSoftware command received
32154 = POWERLINK V2: ResetNode command received
32155 = POWERLINK V2: ResetCommunication command received
32156 = POWERLINK V2: ResetConfiguration command received
32157 = POWERLINK V2: Unknown PDO error
32158 = POWERLINK V2: RxPDO frame too short
32159 = POWERLINK V2: Incorrect version of PDO mapping
32160 = POWERLINK V2: Threshold value exceeded
32161 = POWERLINK V2: No StatusResponse callback function
32162 = POWERLINK V2: Boot errors
32163 = POWERLINK V2: General failure of a mandatory CN
32164 = POWERLINK V2: Failure of a mandatory CN
32165 = POWERLINK V2: Not enough memory for ASend
32166 = POWERLINK V2: Station activation failed
32167 = POWERLINK V2: Station not configured
32168 = POWERLINK V2: Invalid frame format
32169 = POWERLINK V2: ASend exclusively reserved
32170 = POWERLINK V2: Firmware file not found.
32171 = POWERLINK V2: Firmware update error
32172 = POWERLINK V2: Node mode doesn't match node ID
32173 = POWERLINK V2: Bind failed
32174 = POWERLINK V2: IP configuration false
32175 = POWERLINK V2: Asynchronous error
32176 = POWERLINK V2: Software verification failed
32177 = POWERLINK V2: Sub-index already exists.
32178 = POWERLINK V2: Index already exists.
32179 = POWERLINK V2: No free index available
32180 = POWERLINK V2: Maximum length for broadcast channels exceeded
32181 = POWERLINK V2: Maximum length for PollResponse exceeded
32182 = POWERLINK V2: Maximum length for PollRequest exceeded
32183 = POWERLINK V2: Configuration error
32184 =  POWERLINK V2: SDO command layer timeout
32185 = POWERLINK V2: Firmware update success
32186 = POWERLINK V2: Thread timeout exceeded
32250 = Error: The damping constant D is negative.
32251 = Error: The filter time constant T1 is negative.
32252 = Error: The filter time constants T1 and T2 are 0.
32253 = Error: The filter time constant T2 is negative.
32254 = Error: The filter time constant Tf is less than or equal to 0.
32255 = Error: The differentiation time constant Tv is negative.
32256 = Error: An error occurred during memory allocation for the internal ring buffer.
32257 = Error: t_FIFO is negative.
32258 = Error: The switching time tSwitch is negative.
32259 = Error: No valid pointer pNodeVec to the node vector found.
32260 = Error: The x coordinates of the node vector are not sorted in ascending or descending order.
32261 = Error: The y coordinates (Ui with i = 1..n) of the node vector are not sorted in ascending or descending order.
32262 = Error: PID: The maximum manipulated variable ramp Parameter.dY_max is negative. P2P controller: The maximum manipulated variable ramp pAddPar->dY_max is negative. Position controller: The maximum change rate for the piston speed (acceleration) pPID_Para_s->dv_max is negative. Force controller: The maximum volume flow change speed pPID_Para_F->dQ_max is negative.
32263 = Error: Invalid differentiation mode (d_mode).
32264 = Error: The set value weakening factor Kw is less than 0 or greater than 1.
32265 = Error: The wind-up damping factor K_Fbk is negative.
32266 = Error: The filter time constant Tf of the differentiator is negative.
32267 = Error: The filter time constant Tf of the differentiator is equal to 0 while the differentiation time constant Tv is greater than 0.
32268 = Error: PID: The integration time constant for I_Switch < 0 Parameter.Tn_neg is negative. Position controller: The integration time constant for movements in the 'negative' direction pPID_Para_s->Tn_neg (P2P: pAddPar->Tn_neg) is negative.
32269 = Error: PID: The integration time constant for I_Switch > 0 Parameter.Tn_pos is negative. Position controller: The integration time constant for movements in the 'positive' direction pPID_Para_s->Tn_pos (P2P: pAddPar->Tn_pos) is negative. Force controller: The integration time constant pPID_Para_F->Tn is negative.
32270 = Error: The differentiation time constant Tv of the differentiator is negative.
32271 = Error: PID: The maximum set and/or actual value Parameter.WX_max is lower than the minimum value Parameter.WX_min.Position controller, AutoTune: The maximum value of the set and/or actual position pPID_Para_s->s_max is lower than the minimum value pPID_Para_s->s_min.Force controller: The maximum value of the set and/or actual force pPID_Para_F->Fp_max is lower than the minimum value pPID_Para_F->Fp_min.
32272 = Error: PID: The lower limit for manipulated variables Parameter.Y_min is less than -100%, the upper limit for manipulated variables Parameter.Y_max is greater than +100%, or Parameter.Y_max is less than or equal to Parameter.Y_min. P2P controller: The lower limit for manipulated variables pAddPar->Y_min is less than -100%, the upper limit for manipulated variables pAddPar->Y_max is greater than +100%, or pAddPar->Y_max is less than or equal to pAddPar->Y_min.Position controller, AutoTune: The lower limit for piston speed pPID_Para_s->v_min is less than -Internal.vCyl_sup, the upper limit for piston speed pPID_Para_s->v_max is greater than Internal.vCyl_sup, or pPID_Para_s->v_max is less than or equal to pPID_Para_s->v_min.Force controller: The lower limit for the valve volume flow pPID_Para_F->Q_min is less than -pValve_Para->Qnom_neg, the upper limit for the valve volume flow pPID_Para_F->Q_max is greater than pValve_Para->Qnom_pos or pPID_Para_F->Q_max is less than or equal to pPID_Para_F->Q_min.
32273 = Error: The time constant T1 is negative.
32274 = Error: The time constant T2 is negative.
32275 = Error: The time constant T1 is negative.
32276 = Error: The damping constant D is negative.
32277 = Error: The filter time constant Tf is less than or equal to 0.
32278 = Error: The value of minimum valve opening is outside the permissible range of 0 <= yValve_min <= 1.
32279 = Error: At least one of the two cylinder piston areas A_Cyl_pos or A_Cyl_neg was entered as less than or equal to 0.
32280 = Error: The system pressure pSupply is not greater than the tank pressure pTank.
32281 = Error: The system pressure pSupply is less than or equal to 0.
32282 = Error: The tank pressure pTank is negative.
32283 = Error: The nominal pressure drop at valve edge pDelta_nom is less than or equal to 0.
32284 = Error: At least one nominal valve volume flow (Qnom_pos or Qnom_neg) was entered as less than or equal to 0.
32285 = Error: The value of valve overlap is outside the valid range of 0 <= yValve_0 < 1.
32286 = Error: The fall time t_fall is negative.
32287 = Error: The hold time t_hold is negative.
32288 = Error: The rise time t_rise is negative.
32289 = Error: Acceleration in the 'negative' direction pMove_Para->aAcc_neg is negative.
32290 = Error: Acceleration in the 'positive direction pMove_Para->aAcc_pos is negative.
32291 = Error: Deceleration in the 'negative' direction pMove_Para->aDec_neg is negative.
32292 = Error: Deceleration in the 'positive' direction pMove_Para->aDec_pos is negative.
32293 = Error: The pointer pMove_Para on the motion parameter vector is an NIL-Pointer.
32294 = Error: The jolt time pMove_Para->t_Jolt is negative.
32295 = Error: The maximum speed of movement in the 'negative' direction pMove_Para->vC_neg is negative.
32296 = Error: The maximum speed of movement in the 'positive' direction pMove_Para->vC_pos is negative.
32297 = Error: The cylinder height was entered as less than or equal to 0.
32298 = Error: The resulting moving mass of the hydraulic system was set less than or equal to 0.
32299 = Error: No Pointer pSystem_Para (pSystem_ParaAdd) specified for the system parameters HCRSystemPara_typ (HCRSystemParaAdd_typ).
32300 = Error: The maximum system pressure pSupply_max is less than 0.
32301 = Error: The static volume of the cylinder chamber responsible for movement in the'negative' direction was set less than 0.
32302 = Error: The static volume of the cylinder chamber responsible for movement in the'positive' direction was set less than 0.
32303 = Error: The selected mode for the F-y servo correction does not exist.
32304 = Error: The selected mode for the v-y servo correction does not exist.
32305 = Error: Position controller: No Pointer pPID_Para_s specified for the PID-parameters HCRPIDPara_s_typ. Force controller: No Pointer pPID_Para_F specified for the PID-parameters HCRPIDPara_s_typ.
32306 = Error: No pointer pValve_Para specified for the valve parameters HCRValvePara_typ.
32307 = Error: The filter band width B is less than or equal to 0.
32308 = Error: The filter frequency f0 is less than or equal to 0.
32309 = Error: Position of cylinder piston x0_Cyl, at which the critical natural frequency of the hydraulic system occurs, lies outside the cylinder dimensions.
32310 = Error: The minimum cylinder piston position value, after which the proportional gain correction is calculated is less than 0. The maximum position value, up to which the proportional gain is calculated is greater than the cylinder height h_Cyl or x_Cyl_max is less than or equal to x_Cyl_min.
32313 = Error: The time constant T1 is negative.
32314 = Error: The filter frequency f0 is less than or equal to 0.
32315 = Error: The time t_delta, which is available for the profile generation, is less than or equal to 0.
32316 = Error: The net time (t_delta - t_Jolt), which is available for the profile generation, is less than or equal to 0.
32317 = Error: The jolt time t_Jolt is negative.
32318 = Error: The filter time constant Tf is less than 0.
32370 = Warning: The filter time constant T1 entered is not larger than the corresponding task cycle time.
32371 = Warning: The filter time constant T1 = 0.
32372 = Warning: The filter time constant T2 entered is not larger than the corresponding task cycle time.
32373 = Warning: The filter time constant T2 = 0.
32374 = Warning: The filter time constant Tf entered is not larger than the corresponding task cycle time.
32375 = Warning: The differentiation time constant Tv entered is not larger than the corresponding task cycle time.
32376 = Warning: The differentiation time constant Tv = 0. The DTi element (i = 1, 2, 2s) is temporarily turned off (y = 0).
32377 = Warning: t_FIFO was not entered as a whole number multiple of the cycle time.
32378 = Warning: t_FIFO was entered as smaller than the corresponding task cycle time, and was automatically increased to this value.
32379 = Warning: The switching time tSwitch entered is not 5 times larger than the corresponding task cycle time.
32380 = Warning: The switching time tSwitch = 0. Switching not jolt-free.
32381 = Warning: The smoothing factor Rness is larger than the maximum possible smoothing factor (Internal.Rness_crit).
32382 = Warning: NbNodes <= 1. A point-to-point linear function requires at least two nodes.
32383 = Warning: Sorting of the x coordinates of the node vector is monotonic, but not strictly monotonic.
32384 = Warning: The y coordinates of the node vector are not sorted in ascending or descending order.
32385 = Warning: Sorting of the y coordinates of the node vector is monotonic, but not strictly monotonic.
32386 = Warning: The filter time constant Tf of the differentiator is not larger than the corresponding task cycle time.
32387 = Warning: PID: The integration time constant for I_Switch < 0 Parameter.Tn_neg is not larger than the corresponding task cycle time. Position controller: The integration time constant for movements in the 'negative' direction pPID_Para_s->Tn_neg (P2P: pAddPar->Tn_neg) is not larger than the corresponding task cycle time.
32388 = Warning: PID: The integration time constant for I_Switch > 0 Parameter.Tn_pos is not larger than the corresponding task cycle time. Position controller: The integration time constant for movements in the 'positive' direction pPID_Para_s->Tn_pos (P2P: pAddPar->Tn_pos) is not larger than the corresponding task cycle time. Force controller: The integration time constant pPID_Para_F->Tn entered is not larger than the corresponding task cycle time.
32389 = Warning: The differentiation time constant Tv of the differentiator is not larger than the corresponding task cycle time.
32390 = Warning: PID: The feed forward size Yadd was outside the permissible interval of [-100%, 100%] and has been limited accordingly. Position controller: The feed forward speed v_add was outside the permissible interval of [-Internal.vCyl_sup, Internal.vCyl_sup] and has been limited accordingly. Force controller: The feed forward volume flow Q_add was outside the permissible interval of [-pValve_Para->Qnom_neg, pValve_Para->Qnom_pos] and has been limited accordingly.
32391 = Warning: The integrator's manipulated variable Yi has reached its maximum value.
32392 = Warning: The integrator's manipulated variable Yi has reached its minimum value.
32393 = Warning: PID: The manipulated variable for manual operation Yman was set above the maximum permissible value Parameter.Y_max and has been limited to this maximum. Position controller: The speed of movement for manual operation v_man was set above the maximum permissible value pPID_Para_s->v_max and has been limited to this maximum. Force controller: The valve volume flow for manual operation Q_man was set above the maximum permissible value pPID_Para_F->Q_max and has been limited to this maximum.
32394 = Warning: PID: The manipulated variable for manual operation Yman was set below the minimum permissible value Parameter.Y_min and has been increased to this minimum. Position controller: The speed of movement for manual operation v_man was set below the minimum permissible value pPID_Para_s->v_min and has been increased to this minimum. Force controller: The valve volume flow for manual operation Q_man was set below the minimum permissible value pPID_Para_F->Q_min and has been increased to this minimum.
32395 = Warning: The time constant T1 entered is not larger than the corresponding task cycle time.
32396 = Warning: The time constant T1 = 0.
32397 = Warning: The time constant T2 entered is not larger than the corresponding task cycle time.
32398 = Warning: The time constant T2 = 0.
32399 = Warning: The time constant T1 entered is not larger than the corresponding task cycle time.
32400 = Warning: The time constant T1 = 0. The function block behaves like a P element with a gain factor of 1.
32401 = Warning: The filter time constant Tf entered is not larger than the corresponding task cycle time.
32402 = Warning: Friction force in the 'negative' direction Ff_Cyl_neg < 0.
32403 = Warning: Friction force in the 'positive' direction Ff_Cyl_pos < 0.
32404 = Warning: The calculated pressure for the 'negative' cylinder pressure chamber is too high. Improper selection of Fp_Cyl, Ff_Cyl_pos or Ff_Cyl_neg.
32405 = Warning: The calculated pressure for the 'negative' cylinder pressure chamber is too low. Improper selection of Fp_Cyl, Ff_Cyl_pos or Ff_Cyl_neg.
32406 = Warning: The measured or estimated pressure for the 'negative' cylinder pressure chamber is negative. Internally, pCyl_neg = 0 is assumed.
32407 = Warning: The calculated pressure for the 'positive' cylinder pressure chamber is too high. Improper selection of Fp_Cyl, Ff_Cyl_pos or Ff_Cyl_neg.
32408 = Warning: The calculated pressure for the 'positive' cylinder pressure chamber is too low. Improper selection of Fp_Cyl, Ff_Cyl_pos or Ff_Cyl_neg.
32409 = Warning: The measured or estimated pressure for the 'positive' cylinder pressure chamber is negative. Internally, pCyl_pos = 0 is assumed.
32411 = Warning: The valve opening yValve has reached the maximum value (-1 or +1).
32412 = Warning: An error occurred while allocating memory for the internal ring buffer.
32413 = Warning: Automatic calculation of proportional gain Kp leads to an invalid result.
32414 = Warning: The filter frequency f0 is too high. For a valid input choose f0 < 1/(2 x Pi x Ts), where Ts is the task cycle time.
32416 = Warning: The time constant T1 entered is not larger than the corresponding task cycle time.
32417 = Warning: The time constant T1 = 0.
32418 = Warning: The integration time constant Tn entered is not larger than the corresponding task cycle time.
32419 = Warning: Fp_end was selected equal to the value of the set force Fp_set when dFp_set != 0.
32420 = Warning: The time t_delta_act, which was actually required for the profile generation, deviates massively from t_delta.
32450 = The X2X I/O system is not initialized properly.
32451 = An X2X module didn't accept one of its initialization registers.
32452 = Internal initialization error (version conflict).
32453 = Function block called twice:
32454 = Incorrect X2X module inserted (module replaced during runtime by a module of a different type - restart required!).
32455 = Error response while accessing register.
32456 = Timeout during register access.
32457 = No X2X module exists with this node number.
32458 = Register with this number not present or has an incorrect type.
32459 = Logbook entry from the firmware level.
32480 = Assertion from SSDO driver
32481 = SLID and SMID not unique
32500 = Ident is not allowed.
32501 = Error reserving an additional ident.
32502 = Port number already in use.
32503 = Faulty parameter.
32504 = Invalid I/O control.
32505 = No data to receive.
32506 = Error applying data.
32507 = Error during sending
32508 = Error during sending
32509 = Not allowed to send broadcasts.
32510 = Cannot reach to host/network.
32511 = The interface address is invalid.
32550 = Error creating a socket.
32551 = Error in connection of the sockets.
32552 = Connection error.
32599 = Error while setting the socket options.
32600 = Invalid ident
32601 = Could not reserve additional ident.
32602 = Port number already in use.
32603 = Incorrect parameter.
32604 = Invalid I/O control.
32605 = No data is available for reading.
32606 = The data length applied doesn't correspond to the specified data length.
32607 = Ressource is temporarily unavailable
32608 = Could not establish connection
32609 = Connection has been terminated.
32610 = Connection already exists.
32611 = No OOB data available.
32612 = Invalid interface address.
32613 = No client yet connected to server.
32650 = Error while creating the socket.
32651 = Error connecting to the port number or IP address.
32652 = Error listening to the socket.
32653 = Error accepting on the socket.
32698 = SSL handshake failed
32699 = Error setting the default options.
32700 = Faulty parameter.
32701 = Error creating a socket.
32702 = Could not establish connection
32703 = Timeout exceeded.
32704 = Unexpected server error.
32705 = Authentication mechanisms not supported.
32706 = Login error.
32707 = Invalid attachment
32708 = Unexpected SSL system error.
32709 = SSL handshake failed.
32749 = Sending or receiving error
32750 = No response sent by station within the specified timeout.
32751 = The IP address entered (SG4: name also) could not be resolved.
32752 = Resource problem in system.
32753 = Cannot connect to host.
32799 = Unexpected error receiving response.
32850 = The specified parameters are invalid (NULL).
32899 = SG4: Specified device invalid. SG3 / SGC: No Ethernet device present in system.
32900 =  AsUSB library error: USB device not found
32901 = The specified buffer length is too small
32902 = Buffer is not set
32950 = Error in the generic mailbox interface.
32951 = Error in the generic mailbox interface.
32952 = Error in the generic mailbox interface.
32953 = Error in the generic mailbox interface.
32954 = Error in the generic mailbox interface.
33050 = Driver initialization failed
33051 = Data point not found
33052 = Modbus database could not be created
33053 = Error due to shortage of memory
33054 = Connection configuration not successful
33055 = Internal connection error
33056 = Data block configuration error
33057 = Unknown status during data transfer
33058 = Data packet does not exist
33059 = Error during partial network scan
33060 = Inconsistent configuration of connections
33061 = Inconsistent data block configuration
33062 = Unsupported Modbus code
33063 = No instance is possible for the Modbus driver.
33064 = Error during partial network scan.
33065 = Modbus module will be disabled
33066 = Modbus error number output
33067 = ID conflict: There is no slave with this connection ID
33068 = Configuration error: Incorrect ID
33069 =  
33070 = Overflow: Queue for Modbus packets is full
33071 = Modbus error
33072 = Connection error
33073 = Cycle time error
33074 = Error receiving socket data
33100 = The increase of the current temperature was above the specified increase (delta_dT_sync_cool) during the time frame cnt_wait_cool and the temperature has already risen to the upper temperature limit (Tset + delta_T_sync_stop). The tuning procedure will be executed immediately.
33101 = Temp > Tset + delta_T_sync_stop
33102 = Tf <= dt (=cycle time of the function block call)
33150 = disable_heating = TRUE enable_cooling = FALSE
33151 = disable_heating = TRUE enable_cooling = FALSE
33152 = The time constant t_ignore_dT_heat is greater than the heating time.
33153 = D < 0
33154 = Tf <= 0
33200 = Invalid parameter.
33201 = Buffer too small
33210 = An invalid parameter was transferred to the function block.
33211 = Length of the transferred string is to short.
33212 = The transferred DTStructure contains invalid values.
33213 = Automation Runtime error.
33230 = Wrong parameter specified while using an internal SDM function
33231 = Error when using an internal SDM function
33232 = Resource bottleneck in the system
33233 = Error creating or deleting an OS task
33234 = Error when using an internal SDM function
33235 = Error when using an internal SDM function
33236 = Error when using an internal SDM function
33237 = Error when using an internal SDM function
33238 = Error when using an internal SDM function
33239 = Error when using an internal SDM function
33240 = Error when using an internal SDM function
33281 = Warning: Old revision of the PCI interface module
33282 = Warning: Old CPU revision
33283 = Warning: Old revision of the PCI interface module
33284 = Warning: Old CPU revision
33300 = Error initializing the SNMP service
33301 = Invalid SNMP package received.
33302 = SNMP response package could not be sent.
33303 = Insufficient memory available.
33310 = Simulink fundamental sample time does not match duration of Automation Studio cyclic task class. Simulink fundamental sample time does not match duration of Automation Studio cyclic task class.
33320 = Semaphore could not be created.
33321 = Semaphore could not be deleted.
33322 = Semaphore with the specified ident does not exist.
33323 = Semaphore is being used
33324 = Semaphore is not being used.
33371 = Register could not be inserted.
33372 = A default value is being used.
33380 = An incorrect mode function code was used.
33381 = Invalid station number
33382 = Error writing a Modbus frame
33383 = Checksum error
33384 = Length of the response frame is not correct.
33385 = Modbus response invalid
33386 = 
33387 = An error response was received.
33388 = Cycle time violation
33389 = Connection error
33400 = Error allocating or releasing memory.
33401 = Error linking file device.
33402 = TCP/IP error.
33412 = HTTP request could not be processed.
33701 = Internal error in in the AR OPC server
33702 = Internal error in the AR OPC server
33703 = Internal error in the AR OPC server
33704 = Internal error in the AR OPC server
33705 = Internal error in the AR OPC server
33706 = Internal error in the AR OPC server
33707 = Internal error in the AR OPC server
33708 = Internal error in the AR OPC server
33709 = Internal error in the AR OPC server
33710 = Internal error in the AR OPC server
33711 = Internal error in the AR OPC server
33712 = Internal error in the AR OPC server
33713 = Internal error in the AR OPC server
33714 = Internal error in the AR OPC server
33715 = Internal error in the AR OPC server
33716 = Internal error in the AR OPC server
33717 = Internal error in the AR OPC server
33718 = Invalid DCOM interface
33760 = General fault in the device driver
33761 = No memory available
33762 = Faulty configuration
33763 = Invalid device
33764 = The listener could not be installed.
33780 = General fieldbus fault in the device driver
33799 = Maximum error number of the NetX I/O device driver
33800 = Connection to electronic module lost in send/receive direction.
33801 = Unpermitted buffer change
33802 = Invalid buffer given (null pointer or length = 0)
33803 = Specified buffer too small
33805 = Interner FIFO overrun (FIFO size: 128 bytes)
33806 = The given MTU is invalid (null pointer or length = 0)
33807 = The given pointer "pSequ" is a null pointer
33808 = Error on function block's configuration input "cfg"
33809 = The frame has been completely stored in the receive buffer
33810 = Memory error
33811 = Invalid parameter transferred (e.g. null pointer, empty string
33812 = General error
33813 = No more XML nodes found
33814 = Buffer for name too small
33815 = Buffer for value too small
33816 = Invalid attribute index specified
33817 = Element has no attributes
33818 = XML data not in valid XML format
33819 = Invalid identifier sent
33820 = No open XML element found
33821 = Incorrect position of the XML node
33822 = Error converting texts
33823 = Error converting texts
33824 = unsupported encoding given
33850 = Invalid parameter.
33900 = General fault in the device driver
33901 = Communication error
33902 = General fault in the device driver
33903 = Configuration error
33930 = Failed to configure interface
33931 = Error getting the cyclic data points.
33932 = Error creating the callback.
33933 = Connection error in receive direction.
33934 = Connection error in send direction.
33935 = Receive fifo did not receive all data to be buffered.
33936 = Receive fifo overflow.
33937 = The end of the message/packet could not be set in the receive fifo.
33938 = Error creating the callback.
34200 = Modbus station not configured
34201 = Modbus station not connected
34202 = Invalid number of coils/registers
34203 = Zero pointer transferred
34204 = Specified memory area too small
34205 = Modbus exception
34206 = Modbus response not received in time
34207 = Queue is full
34250 = Null pointer.
34251 = Invalid IP address, host name or port number
34252 = OID of a variable is not set.
34253 = Not enough memory
34254 = Error generating the SNMP request
34255 = Error decoding the SNMP response
34256 = Invalid SNMP response received
34257 = Error status set in the SNMP response
34258 = Null pointer.
34259 = Invalid or unsupported SNMP variable type
34260 = Buffer too small for the variable with the index snmpErrorIdx
34261 = No SNMP response from peer station.
34262 = SNMP package to big
34263 = Invalid variable length
34264 = Unsupported variable type
34265 = Invalid TrapID
34266 = Error generating the TRAP package.
34300 = NETX ODM: Basic error
34301 = NETX ODM: Client connected
34302 = NETX ODM: Client disconnected
34303 = NETX ODM: Driver open
34304 = NETX ODM: Driver closed
34305 = NETX ODM: System device opened
34306 = NETX ODM: System device closed
34307 = NETX ODM: Channel opened
34308 = NETX ODM: Channel closed
34309 = Internal Error
34310 = NETX ODM: Client rejected
34500 = Invalid device
34501 = Could not send message.
34502 = Timeout error.
34503 = CANopen stack error.
34504 = Invalid data length.
34505 = Parameter error
34600 = Invalid name specified for interface.
34601 = Message sent to CANopen stack failed.
34602 = Message sent to CANopen stack timed out.
34603 = The message sent to the CANopen stack was terminated with an error.
34700 = Invalid name specified for interface.
34701 = Message sent to PROFIBUS stack failed.
34702 = Message sent to PROFIBUS stack timed out.
34703 = The message sent to the PROFIBUS stack was terminated with an error.
34704 = A specified parameter is invalid.
34705 = Could not allocate any more memory.
34706 = The listener could not be subscribed.
34707 = No more entries.
34800 = Invalid name specified for interface.
34801 = Message sent to PROFIBUS stack failed.
34802 = Message sent to PROFIBUS stack timed out.
34803 = The message sent to the PROFIBUS stack was terminated with an error.
34804 = A specified parameter is invalid.
34805 = Could not allocate any more memory.
34806 = The listener could not be subscribed.
34807 = No more entries.
34900 = SDM not active
34901 = SDM AR registry: Search KEY not found
34902 = SDM system dump error
34903 = SDM invalid file device
34904 = Null pointer given as data buffer.
34905 = Invalid value
34906 = FBK "Option" parameter invalid.
34930 = Memory error
34931 = Database error
34932 = Invalid identifier
34933 = Invalid column index
34934 = Database not supported
34935 = Buffer too small
34936 = Invalid server name
34937 = Invalid user name
34938 = Invalid password
34939 = Invalid database name
34940 = Invalid SQL statement
34941 = SQL execute statement required
34942 = Invalid data type
34943 = Null pointer
34944 = information not available
34945 = Unsupported encoding specified
34950 = General error.
34951 = Default value is used.
34952 = Invalid Modbus function code
34953 = Error reading data.
34954 = Error writing data.
34955 = Invalid value in Modbus request
34956 = Access denied.
34957 = Error allocating memory
34958 = Error creating a socket
34959 = Driver task error
34960 = Receive error
34961 = Response error
34962 = Error during sending
34963 = Connection Interrupted
34964 = Watchdog error
34965 = Maximum number (3) of client connections exceeded
35001 = Parameter error
35002 = Parameter error
35003 = System error.
35004 = System error.
35005 = System error.
35006 = System error.
35007 = System error.
35008 = System error.
35009 = System error.
35010 = System error.
35011 = System error.
35012 = System error.
35030 = Interface error.
35031 = Internal error.
35032 = Internal error.
35033 = Error message from AS interface stack.
35034 = Parameter error
35035 = Length error.
35050 = There is no driver support for audio
35051 = Invalid parameter(s)
35052 = File not found
35053 = Specified sound source already allocated
35054 = The audio format of the sound source is not supported
35055 = Not enough space available
35056 = Sound source could not be played because the maximum number of sound sources that can be played simultaneously has been reached.
35057 = An exclusive sound source is already being played
35058 = The parameter value is outside the permitted range.
35300 = No response from host.
35301 = Invalid parameter.
35302 = General error sending the echo request.
35320 = Invalid name specified for interface.
35321 = Message sent to Profinet stack failed.
35322 = Message sent to Profinet stack timed out.
35323 = The message sent to the Profinet stack was terminated with an error.
35324 = The specified file length is invalid.
35340 = Invalid name specified for interface.
35341 = Message sent to Profinet stack failed.
35342 = Message sent to Profinet stack timed out.
35343 = The message sent to the Profinet stack was terminated with an error.
35344 = The specified file length is invalid.
35345 = Could not allocate any more memory.
35346 = The listener could not be registered.
35347 = No more entries.
35348 = The specified name is invalid.
35360 = Invalid name specified for interface.
35361 = Message sent to DeviceNet stack failed.
35362 = Message sent to DeviceNet stack timed out.
35363 = The message sent to the DeviceNet stack was terminated with an error.
35364 = A specified parameter is invalid.
35365 = Could not allocate any more memory.
35366 = The listener could not be registered.
35367 = No more entries.
35380 = Invalid name specified for interface.
35381 = Message sent to DeviceNet stack failed.
35382 = Message sent to DeviceNet stack timed out.
35383 = The message sent to the DeviceNet stack was terminated with an error.
35384 = A specified parameter is invalid.
35385 = The specified file length is invalid.
35400 = The DTM Manager is not installed.
35401 = Error in the connection service of the DTM Manager.
35402 = No data received
35403 = No new connection.
35404 = A new connection has been established.
35405 = Connection has been terminated.
35406 = Connection service busy.
35410 = Invalid request string received.
35411 = Request incomplete.
35412 = No resources currently available for request.
35413 = Response string too long.
35414 = General error.
35415 = Memory too small.
35416 = Error in the device driver.
35417 = Inactive CPU.
35420 = Invalid request type
35430 = DTM manager: Client connected
35431 = DTM manager: Client disconnected
35450 = Response string too long.
35451 = Generation of a response to a HART command request failed.
35452 = Invalid X2X module response to a HART command request.
35453 = Error receiving the HART command response.
35454 = Error sending the HART command request.
35455 = Cyclic variable mapping not supported.
35456 = Generation of diagnostics variable list failed.
35457 = Request could not be processed due to unavailable resources.
35458 = Generation of HART command failed.
35459 = Communication timeout between CPU and modem
35460 = Communication timeout between modem and HART device.
35461 = Invalid HART command node address
35462 = The specified buffer is too small for the command response.
35480 = Invalid block address received.
35481 = Received block size doesn't match configured block size.
35482 = FlatStream I/O control call failed.
35483 = Error in the lower driver layer
35485 = Controller redundance ressources init failed.
35550 = Buffer too small.
35551 = Data buffer is too small.
35552 = Header to large.
35553 = A requested header value doesn't fit in the structure.
35554 = Invalid parameter
35555 = No data
35556 = Unsupported request method
35557 = No web server found.
35558 = Web service couldn't be registered on the web server.
35559 = No socket available.
35560 = Too many httpClient instances enabled.
35561 = No error: Connection has been terminated.
35562 = No connection to server possible.
35563 = Name or IP of server couldn't be resolved.
35564 = Connection terminated unexpectedly (None / Incomplete response data received).
35565 = Not found
35566 = Invalid character detected.
35579 = General error
35580 = Invalid syntax for "pDev" parameter
35581 = HART module with this module number not found
35582 = The module is already open.
35583 = Error opening the module driver.
35584 = The ident given is invalid
35585 = The "pCmd" or "pReply" buffer is invalid.
35586 = Error executing the HART command in the module driver
35587 = Waiting queue for HART module
35588 = Error closing the device
35604 = <font FACE="Consolas" SIZE="2">Redundancy support not available
35605 = Project synchronization started
35606 = Project synchronization was completed successfully.
35607 = Project synchronization was not completed successfully.
35608 = A RRAD module could not be installed/uninstalled.
35609 = Manually switching process control is not possible.
35610 = Cold failover - process control switching is not smooth.
35611 = Warm failover - process control switching is not entirely smooth.
35612 = Hot failover - process control switching is smooth.
35613 = Invalid node switch position
35614 = Button pressed briefly
35615 = Button pressed long
35616 = Automatic failover executed
35688 = This function block cannot be used on the standby controller.
35800 = Project successfully transferred
35801 = Error during project transfer
35900 = Error booting the OPC UA server
35901 = Error in how notifications are handled
35902 = Error reading a configuration parameter
35903 = Error parsing an OPC UA configuration module
35904 = Invalid format in OPC UA configuration module
35905 = Multiple object configurations
36100 = Incorrect command structure version
36101 = More than 16 characters are not allowed for password
36102 = No UDID provided for the safety controller
36103 = Error allocating internal memory
36104 = Internal error
36105 = Communication timeout
36106 = No command provided
36107 = Invalid command provided for Enter command
36108 = No password provided for Enter command
36109 = No new password provided for change
36110 = Invalid command for reading back the status
36111 = Incorrect data length for status information returned by system
36112 = No password provided for the download
36113 = Incorrect protocol version or header error
36114 = File already open
36115 = File invalid
36116 = File too large
36117 = Write error
36118 = Error at end of stream
36119 = Incorrect checksum
36120 = The UDID provided does not match the UDID of the safety controller
36121 = Incorrect file size
36122 = No authorization to write - Incorrect password
36123 = Error obtaining file information
36124 = Read error
36125 = Write error
36126 = Constant TRUE signal on a parameter in the command structure
36127 = Comparison failed for the data that was read back
36128 = Unknown or invalid download type
36129 = Incorrect data provided for download
36130 = Unknown or invalid upload type
36131 = Not possible to update from file
36200 =  
36201 =  
36206 =  
36207 =  
36208 =  
36209 =  
36210 =  
36211 =  
36218 =  
36219 =  
36220 =  
36221 =  
36222 =  
36223 =  
36224 =  
36225 =  
36226 =  
36227 =  
36228 =  
36231 =  
36232 =  
36233 =  
36240 = Segment lost.
36241 = Error in the configuration of the "Multiplexing peer station"
36250 = Tuning aborted by user.
36251 = Operating as P element or PT1 / DT1 element since TimeConstant(1) = 0.
36252 = Operating as P element or PT1 / DT1 element since TimeConstant2 = 0.
36260 = Error: MinOut, MaxOut invalid.
36261 = Error: Gain invalid.
36262 = Error: IntegrationTime negative.
36263 = Error: DerivativeTime negative.
36264 = Error: FilterTime negative.
36265 = Error: MinIntegrationPartValue, MaxIntegrationPartValue invalid.
36266 = Error: ThresholdLevel1...ThresholdLevel4 undefined.
36267 = Error: ThresholdLevel1 = ThresholdLevel4 invalid.
36268 = Error: OutputValue1...OutputValue3 undefined.
36269 = Error: MinOut negative.
36270 = Error: Oscillation period too short.
36271 = Error: SetValue negative.
36272 = Error: TimeConstant(1) negative.
36273 = Error: TimeConstant2 negative.
36274 = Error: Gain negative.
36275 = Error: Memory allocation failed.
36276 = Error: DelayTime negative.
36277 = Error: DelayTime too high.
36278 = Error: MaxPosSlewRate negative.
36279 = Error: MaxNegSlewRate negative.
36280 = Error: Highest denominator coefficient Denominator[Order] = 0.
36281 = Error: Order not minimum.
36282 = Order of the transfer function is invalid.
36283 = Error: MinPulseWidth greater than Period.
36284 = Error: MinPulseWidth less than cycle time.
36285 = Error: Period less than cycle time.
36286 = Error: PulseWidth less than cycle time.
36287 = Error: MinPause less than cycle time.
36300 = Warning: MinOut, MaxOut invalid. Retaining the last valid configuration.
36301 = Warning: FilterTime less than cycle time (DerivativePart = 0).
36302 = Warning: Gain invalid. Retaining the last valid configuration.
36303 = Warning: IntegrationTime invalid. Retaining the last valid configuration.
36304 = Warning: DerivativeTime invalid. Retaining the last valid configuration.
36305 = Warning: FilterTime invalid. Retaining the last valid configuration.
36306 = Warning: MinIntegrationPartValue, MaxIntegrationPartValue invalid. Retaining the last valid configuration.
36307 = Warning: ThresholdLevel1...ThresholdLevel4 undefined. Retaining the last valid configuration.
36308 = Warning: ThresholdLevel1 = ThresholdLevel4 invalid. Retaining the last valid configuration.
36309 = Warning: OutputValue1...OutputValue3 undefined. Retaining the last valid configuration.
36310 = Warning: MinOut negative. Retaining the last valid configuration.
36311 = Warning: SetValue negative. Retaining the last valid configuration.
36312 = Warning: Gain = 0.
36313 = Warning: TimeConstant<span style="FONT-FAMILY: Verdana; FONT-SIZE: 10pt" lang="DE">(1) negative. Retaining the last valid configuration.
36314 = Warning: TimeConstant2 negative. Retaining the last valid configuration.
36315 = Warning: Gain negative. Retaining the last valid configuration.
36316 = Warning: Memory allocation failed. Retaining the last valid memory.
36317 = Warning: DelayTime negative. Retaining the last valid configuration.
36318 = Warning: DelayTime too high. Retaining the last valid configuration.
36319 = Warning: MaxPosSlewRate negative. Retaining the last valid configuration.
36320 = Warning: MaxNegSlewRate negative. Retaining the last valid configuration.
36321 = Warning: The highest denominator coefficient Denominator[Order] = 0. Retaining the last valid configuration.
36322 = Warning: Order not minimum. Retaining the last valid configuration.
36323 = Warning: Order invalid. Retaining the last valid configuration.
36324 = Warning: Preset for Out output not possible.
36325 = Warning: MinPulseWidth greater than Period. Retaining the last valid configuration.
36326 = Warning: MinPulseWidth less than cycle time. Retaining the last valid configuration.
36327 = Warning: Period less than cycle time. Retaining the last valid configuration.
36328 = Warning: MinPause less than cycle time. Retaining the last valid configuration.
36329 = Warning: PulseWidth less than cycle time. Retaining the last valid configuration.
36370 = Error: Type invalid.
36371 = Error: Order invalid.
36372 = Error: CutOffFrequency invalid.
36373 = Error: CenterFrequency invalid.
36374 = Error: Bandwidth invalid.
36375 = Error: FrequencyNumerator invalid.
36376 = Error: DampingRatioNumerator invalid.
36377 = Error: FrequencyDenominator invalid.
36378 = Error: DampingRatioDenominator invalid.
36379 = Error: WindowLength invalid.
36380 = Error: An error occurred during memory allocation for the internal ring buffer.
36390 = Warning: Type invalid. Retaining the last valid configuration.
36391 = Warning: Order invalid. Retaining the last valid configuration.
36392 = Warning: CutOffFrequency invalid. Retaining the last valid configuration.
36393 = Warning: CenterFrequency invalid. Retaining the last valid configuration.
36394 = Warning: Bandwidth invalid. Retaining the last valid configuration.
36395 = Warning: FrequencyNumerator invalid. Retaining the last valid configuration.
36396 = Warning: DampingRatioNumerator invalid. Retaining the last valid configuration.
36397 = Warning: FrequencyDenominator invalid. Retaining the last valid configuration.
36398 = Warning: DampingRatioDenominator invalid. Retaining the last valid configuration.
36399 = Warning: WindowLength invalid. Retaining the last valid configuration.
36400 = Warning: An error occurred during memory allocation for the internal ring buffer. Retaining the last valid memory.
36410 = Error: VelocityPosDirection zero or negative.
36411 = Error: VelocityNegDirection zero or negative.
36412 = Error: AccelerationPosDirection zero or negative.
36413 = Error: DecelerationPosDirection zero or negative.
36414 = Error: AccelerationNegDirection zero or negative.
36415 = Error: DecelerationNegDirection zero or negative.
36416 = Error: JoltTime negative.
36417 = Error: Nodes is a null pointer.
36418 = Error: NumberOfNodes less than 2.
36419 = Error: Mode invalid.
36420 = Error: The time coordinates in the array of interpolation points are not sorted.
36421 = Error: Period length of zero.
36430 = Warning: VelocityPosDirection zero or negative. Retaining the last valid configuration.
36431 = Warning: VelocityNegDirection zero or negative. Retaining the last valid configuration.
36432 = Warning: AccelerationPosDirection zero or negative. Retaining the last valid configuration.
36433 = Warning: DecelerationPosDirection zero or negative. Retaining the last valid configuration.
36434 = Warning: AccelerationNegDirection zero or negative. Retaining the last valid configuration.
36435 = Warning: DecelerationNegDirection zero or negative. Retaining the last valid configuration.
36436 = Warning: JoltTime negative. Retaining the last valid configuration.
36437 = Warning: Memory allocation failed.
36438 = Warning: Nodes is a null pointer. Retaining the last valid configuration.
36439 = Warning: NumberOfNodes less than 2. Retaining the last valid configuration.
36440 = Warning: Mode invalid. Retaining the last valid configuration.
36441 = Warning: Time coordinates of the array of interpolation points not sorted. Retaining the last valid configuration.
36442 = Warning: Period length of zero. Retaining the last valid configuration.
36750 = Error allocating I/O library resources
36751 = Error reading the I/O configuration
36752 = Buffer lost
36753 = The specified buffer is invalid.
36754 = Difference between calculated and configured values
36755 = Zero frame received
36770 = Internal SCM error
36771 = Synchronization problem during SCM file access
36772 = SCM cannot open any more files.
36773 = Access to SCM file blocked
36774 = Faulty format of a film in the SCM
36775 = Faulty sequence when transferring an SCM file
36776 = Communication problem between SCM and SLX
36777 = Error accessing SLX registers by SCM
36778 = Incompatible SCM data module found
36780 = Incorrect parameter.
36781 = Invalid ident
36782 = Invalid mode
36783 = FIFO buffer already exists.
36784 = The FIFO buffer does not exist.
36785 = Maximum number of FIFO buffers already reached in the system
36786 = The FIFO buffer is already full.
36787 = The FIFO buffer is empty.
36788 = System error
37300 = A null pointer was transferred.
37301 = General error
37302 = Buffer for array has an incorrect size.
37303 =  <p style="background-color: #C0C0C0">Not enough memory
37304 = Technology Guard not started
37305 = Error accessing license
37306 = Licensing violation
37307 = Licensing violation
37308 = Error creating update context
37309 = Error creating update context file
37310 = Error performing Technology Guard license update
37311 = File not found
37312 = Invalid license ident
37313 = General error
37314 = Specified Technology Guard not found
37315 = Context size too large
37316 = Invalid parameter
37317 = Unsupported license access
37318 = License violation lifted
37319 = License data not yet available
37320 = Unknown dongle
37321 = Invalid user data array size.
37450 = The specified Modbus TCP slave is not configured with a "fixed buffer size".
37451 = A Modbus TCP slave is not running on the specified station.
37452 = The specified address is outside the valid range.
37453 = A null pointer was transferred.
37454 = Invalid number of elements specified
37500 = General internal error
37501 = The command server was not activated.
37502 = Invalid parameters.
37503 = Request queue is full.
37504 = Response buffer too small
37505 = Client connection accepted
37506 = Client closed the connection.
37507 = Could not allocate connection resources
37508 = Maximum number of clients reached
37509 = The command is too long.
37510 = SAFELOGIC doesn't support command access
37511 = SafeLOGIC controller in use
37512 = Connection closed by SafeLOGIC controller
37513 = Unable to establish connection to the SafeLOGIC controller
37514 = General error when opening device driver
37515 = General error calling the device driver (Read)
37516 = General error calling the device driver (Write)
37517 = Client connection close due to an AR-internal client
37530 = Invalid parameters.
37531 = Hardware module doesn't exist
37532 = Register access currently in progress
37533 = Channel doesn't exist
37534 = Unable to access
37540 = General error in DdxxIoIOLink
37541 = Memory too small.
37542 = IO-Link thread was not started.
37543 = Response string is too long.
37544 = 
37545 = IO-Link module communication queue is full.
37546 = Frame error in the response from the IO-Link module.
37547 = Request timeout.
37548 = IO-Link module configuration error.
37549 = Incorrect IO-Link device connected.
37550 = Request type is not supported.
37561 = No IO-Link device connected.
37562 = IO-Link is deactivated.
37563 = Error when communicating with the IO-Link device.
37564 = IO-Link master request queue full
37566 = Request not supported
37567 = Object access failed
37568 = Vendor-specific object access error
37569 = Incorrect interface number
37570 = Write access set to read-only.
37571 = No input data available.
37572 = Frame too short
37573 = Events lost.
37574 = Device has no input data
37575 = Device has no output data
37611 = Text system not yet ready
37612 = Specified buffer size too small
37613 = Invalid event ID
37710 = Text system not yet ready
37711 = Specified buffer size too small
37712 = Invalid event ID
37960 = Invalid parameter
37961 = IO-Link master does not exist or disabled
37962 = Communication error occurred
37963 = Maximum concurrent access count reached
37964 = Communication buffer is full.
37965 = The object access length exceeds the limit.
37966 = The read buffer is too small.
37967 = IO-Link driver error
37968 = Specified data type is invalid.
37969 = Event read
37970 = Event buffer empty
37971 = Vendor-specific error code.
38100 = Could not establish communication between Automation Runtime and I/O firmware
60000 = INFO: Taskclasses synchronous to POWERLINK
65534 = Error: Function block is disabled.
65535 = Busy
65608 = SafeDESIGNER connected
65612 = SafeDESIGNER connected
65621 = SafeDESIGNER connected
69633 = Pointer invalid
69648 = Cross comparision error
69649 = SafeOS cycle counter unequal
69650 = SafePLC state unequal
69651 = SafePLC cycle counter unequal
69652 = SafePLC marker value unequal
69653 = Output checksum data unequal
69654 = Output checksum counter unequal
69655 = Checksums unequal
69656 = Input checksum counter unequal
69657 = Sender ID invalid
69659 = Checksum error
69660 = Checksum error
69661 = Checksum index error
69664 = Invalid pointer
69665 = Invalid pointer
69666 = Invalid pointer
69680 = EMU monitoring error
69681 = EMU monitoring error
69682 = EMU monitoring error
69904 = CRC checksum error
69905 = Invalid request counter
69906 = Invalid service request
69907 = Invalid parameter
69908 = Invalid parameter
69909 = Connection refused
69910 = Logout error
69911 = Logout error
69912 = Timeout error
69913 = Invalid parameter
69914 = Invalid user ID
69915 = User name
69916 = message overrun
69917 = Host name too long
69918 = Invalid parameter count
69919 = Invalid socket ID
69920 = SafeOS error
69921 = Invalid pointer
69922 = Telegram error
69936 = Invalid transfer parameter
69937 = Resource error
69938 = Service request error
69939 = Confirmation message error
69940 = Parameter error
69941 = COM call error
69942 = Reset command error
69943 = CRC checksum error
69944 = User ID error
69952 = Status services error
69953 = Negative COM call
69954 = Failure state error
69955 = Reset failed
69956 = Variable IDs exceeded
69957 = Invalid variable ID
69958 = Variable error
69959 = error setting real time clock
69968 = File services error
69969 = Illegal parameter
69970 = File write error
69971 = File seek error
69972 = File close error
69973 = File open error
69974 = File remove error
69975 = File read error
69976 = Fomatting error
69977 = Action flag error
69978 = File directory error
69979 = Cconflicting directory status
69980 = Invalid directory flag
69981 = Invalid start flag
69982 = Invalid parameter length
69983 = Log file error
69984 = Log file error
69985 = Log file error
69986 = Log file cannot be read
69987 = Log file error
70000 = Reset command
70145 = Invalid Pointer
70146 = Test function called
70160 = INIT_CALL failed
70161 = BOOT_CALL failed
70162 = PRE_SYNC_CALL failed
70163 = S_CALL failed
70164 = POST_SYNC_CALL failed
70177 = Too little program memory
70178 = Invalid stack length
70179 = Invalid file size
70180 = File error
70181 = File error
70192 = SafePLC error
70193 = Safe input error
70194 = Safe output error
70195 = Non-safe input error
70196 = Non-safe output error
70197 = Diagnostic error
70198 = Diagnostic error
70199 = Function block diagnostic error
70208 = SafePLC state has changed
70209 = Variable error
70210 = Force list sent
70211 = Force list: new element
70212 = Force list: element deleted
70213 = Force list deleted
70225 = Invalid pointer
70226 = Invalid I/O item
70227 = Test function called
70228 = Checksum calculation error
70229 = Invalid SafeOS operational state
70230 = Invalid state of the PLC switch
70241 = Invalid number of safe intputs in use
70242 = Invalid number of safe outputs in use
70243 = Invalid number of non safe inputs in use
70244 = Invalid number of non safe outputs in use
70245 = Invalid number of diagnostic inputs in use
70246 = Invalid number of diagnostic outputs in use
70247 = Invalid number of function block diagnostic outputs in use
70401 = Invalid pointer
70402 = Pointer out of range
70403 = Test function called
70416 = Checksum calculation error
70417 = Invalid CRC container version number
70418 = Invalid CRC container length
70419 = Different CRC checksums
70420 = Invalid CRC counter value
70421 = Invalid checksum container
70422 = File checksum entries lacking
70423 = Invalid recursion of CRC containers
70424 = File missing in CRC container
70425 = Referenced file of CRC container not found
70426 = Checksum container validation error
70427 = Checksum container validation error
70428 = Missing standard application files
70429 = Standard application files validation error
70430 = No files in interface file structure
70431 = Too many files in interface file structure
70448 = Invalid file name
70449 = Unequal file sizes
70450 = File index out of range
70451 = CRC checksum error
70452 = Prior file check performed
70453 = Lacking file or CRC container validation
70454 = File state is set to invalid
70657 = Invalid pointer
70658 = Test function called
70672 = Error-stack overflow
70673 = Entering failsafe state not possible
70674 = Writing log book entry not possible
70675 = Interface error stack is full
70676 = SafeOS error stack switching failed
70677 = Interface error stack error
70678 = SafeOS error stack error
70679 = Invalid error stack function call
70704 = Unknown access identification from interface (HNF, I/O stack or communication stack)
70913 = Invalid pointer
73729 = Invalid pointer
73744 = Cross comparision error
73745 = SafeOS cycle counter error
73746 = SafePLC state error
73747 = SafePLC cycle counter error
73748 = SafePLC marker value unequal
73749 = Output checksum data error
73750 = Output checksum counter error
73751 = Input checksum data error
73752 = Input checksum counter error
73753 = Invalid sender ID
73755 = Synchronization structure checksum data error
73756 = Compare structure checksum data unequal
73757 = Checksum index error
73760 = Invalid pointer
73761 = Invalid pointer
73762 = Invalid pointer
73776 = EMU monitoring function error
73777 = EMU monitoring function error
73778 = EMU monitoring function error
74241 = Invalid pointer
74242 = Test function called
74256 = INIT_CALL failed
74257 = application start failed
74259 = S_CALL failed
74273 = Insufficient program memory
74274 = Invalid stack length
74275 = Invalid control structure
74277 = Boot project file error
74288 = SafePLC cycle counter error
74289 = SafePLC status error
74321 = Invalid pointer
74322 = Invalid I/O item
74323 = Test function called
74324 = Invalid I/O item
74337 = Amount of used safe inputs exceeded
74338 = Amount of used safe outputs exceeded
74339 = Amount of used non safe inputs exceeded
74340 = Amount of used non safe outputs exceeded
74341 = Amount of used diagnostic inputs exceeded
74342 = Amount of used diagnostic outputs exceeded
74343 = Amount of used function block diagnostic outputs exceeded
74352 = Invalid C-code function number
74353 = C-code function table version error
74354 = Invalid C-code function ID
74355 = Invalid C-code function's major version number
74356 = Invalid C-code function's minor version number
74357 = Invalid C-code function's stack size
74497 = Invalid pointer
74498 = Calculated pointer error
74499 = Test function called
74512 = Checksum calculation error
74513 = CRC container version error
74514 = Invalid CRC container length
74515 = Checksum container calculation error
74516 = Invalid CRC count value
74517 = Invalid checksum container
74518 = File checksum entries lacking
74519 = CRC container recursion error
74520 = CRC container file search error
74521 = Lacking CRC container file
74522 = Checksum container file validation error
74523 = Checksum container file content error
74524 = Standard application files error
74525 = Standard application files validation error
74526 = Lacking files in interface file structure
74527 = Interface file structure error
74544 = Invalid file name
74545 = Unequal file sizes
74546 = File index out of range
74547 = File data CRC check error
74548 = File already checked earlier on
74549 = Standard CRC container / standard application file validation error
74550 = File state invalidated
74754 = Test function called
74768 = Error-stack overflow
74769 = Entering failsave state not possible
74773 = Copying interface error stack failed
74775 = Interface error-stack full
74800 = Unknown interface access identification
75009 = Invalid pointer
77825 = No module's code available
77826 = Project size exceeded
77827 = Instruction not implemented or incorrect data type
77828 = POU size too big
77829 = Missing label
77830 = Error passing on parameter
77831 = Maximum nesting level of parenthesis exceeded
77832 = Nesting error
77833 = Undefined parameter
77834 = Data type conversion error
77835 = Automatic accumulator data type conversion error
77836 = Maximum amount of errors reached
77837 = POU code generation error(s)
77838 = Parameter passing error
77839 = Operand not implemented or range exceeded
77840 = Invalid accumulator's data type (expected: ANYNUM)
77841 = Invalid accumulator's data type(expected: ANYBIT)
77842 = Invalid accumulator's data type
77843 = Selected index register not valid
77844 = Invalid accumulator's data type
77845 = Accumulator push/pop error
77846 = Accumulator stack error
77847 = Accumulator stack error
77848 = Inline code size exceeded
77849 = Inline byte copy alignment error
77850 = Misaligned data type
77851 = Unknown timer function requested
77852 = Forbidden real function requested
77853 = Forbidden BCD function requested
77854 = Forbidden MEMMAN function requested
77889 = Invalid POU
77890 = POU (info) of unknown POU type
77891 = POU too big
77892 = POU too big
77893 = POU insertion error
77894 = POU insertion error
77895 = Memory management error
77896 = POU inserted (info)
77897 = Invalid POU type (info)
77898 = Memory reorganization error, PLC stopped
77899 = Multiple PG definition (info)
77900 = Multiple SPG definition (info)
77901 = Memory error in initialized POU data
77902 = Internal Error
77903 = Multiple function block definition (info)
77904 = Not all POU's were sent
77905 = Invalid function block number
77906 = Invalid PG number
77907 = Invalid SPG number
77908 = Invalid IEC code range assignment
77909 = Internal Error
77910 = Invalid project header
77953 = Invalid function or function block
77954 = Invalid firmware function or function block
77955 = Invalid program
77956 = Invalid system program
77957 = Invalid change of state
77958 = Unknown system mode! PLC stopped! Reset hardware
77959 = Division by zero
77960 = Bus error! PLC stopped
77961 = Stack overflow! PLC stopped
77962 = Indirect variable access error
77963 = No available project found
77964 = Fatal POU error
77965 = Invalid project version
77966 = WARM start not possible! COLD start carried out instead
77967 = Failed to change SafePCOS1 state
77968 = Safe PLC/HW state invalid
77969 = Failure state! Service execution not possible
77970 = PLC switch is in STOP position, service not possible
77971 = Invalid PLC toggle-command
77972 = arithmetic overflow
77984 = Operand not implemented or range exceeded
77985 = Write access illegitimate for this variable
77986 = Invalid list type
77987 = No force list available
77988 = Not enough memory for force list
77989 = Invalid user ID during online data access
77990 = Null pointer in assignment
77991 = Invalid list-ID while online data access
77992 = Request for communication but no input data available
77993 = Debug watchdog
77994 = The force element searched for is not found in the force list
77995 = In SAFE state no forcing allowed
77996 = Too much data, out of memory
77997 = Invalid debug command
77998 = In SAFE state no overwriting allowed
77999 = Not all elements of the variable status list have been processed
78000 = Invalid module type
78001 = Too many data requests
78002 = Amount of data sent insufficient
78003 = Unexpected online service inquiry
78004 = Invalid memory compare table
78005 = Invalid data type
78006 = Invalid system time
78007 = No project file for booting available
78008 = Invalid logical address
78009 = Invalid boot file
78010 = Invalid address of memory compare variable
78011 = Invalid logical address of safe input
78012 = Invalid logical address of non-safe input
78013 = Invalid logical address of device diagnostic input
78014 = Invalid logical address of safe output
78015 = Invalid logical address of non-safe output
78016 = Invalid logical address of device diagnostic output
78017 = Invalid logical address of function block diagnostic output
78018 = Invalid safe input length from SafeOS
78019 = Invalid non safe input length from SafeOS
78020 = Invalid device diagnostic input length from SafeOS
78021 = Invalid safe output length from SafeOS
78022 = Invalid non safe output length from SafeOS
78023 = Invalid device diagnostic output length from SafeOS
78024 = Project does not match firmware (FBK diag len)
78025 = Internal error
78026 = Internal error
78027 = Synchronization failed
78028 = SafePCOS2 state differs from SafePCOS1 state
78029 = Non interruptable CALL has been interrupted
78030 = Corrupted call order
78031 = Execution of synchronized command failed
78032 = Too much data for synchronization
78033 = Invalid synchronization structure
78034 = Invalid synchronization command
78035 = Invalid memory compare counter
78036 = No or not enough SafeOS stack memory assigned
78037 = No C-function found with this function number
78038 = ID of the C-function differs from installed C-function
78039 = C-function's version differs from installed C-function
78040 = C-function's stack size of differs from installed C-function
78041 = C-function's number already installed
78042 = Invalid C-function number
78043 = Limit of installable C-functions exceeded
78044 = Invalid pointer to C-function's data
78045 = Check of C-function failed
78054 = Additional information
78124 = Pointer to the variable status list is invalid
78125 = Pointer to variable status result list is invalid
78126 = Invalid physical variable address
78127 = The data length of the variable status result list is invalid
78128 = Invalid pointer in internal debug data
78129 = Invalid list length
78389 = invalid MEM address
90113 = Invalid list length
90114 = Invalid list type assignment
90115 = Assigned data length of 0
90116 = Invalid user ID
90117 = Invalid physical address
90118 = Invalid variable status list
90119 = The execution of the requested variable status action failed
90120 = Invalid variable status action
90121 = Variable status list unavailable
90122 = Invalid pointer to the variable status list
90123 = Invalid pointer to the variable status result list
90124 = Insufficient memory for variable status list
90125 = Insufficient memory for variable status result
90126 = Invalid overwrite list
90127 = Invalid pointer to overwrite list's data
90128 = Invalid force list
90129 = No force list available
90130 = Invalid force action
90131 = Execution of requested force action failed
90132 = Force element has not been appended to the force list
90133 = Force element has not been deleted from the force list
90134 = Error deleting existing force list
90135 = Insufficient memory for assigned force list
90136 = Invalid pointer to force list data
90137 = Invalid pointer to received communication data
90138 = Searched force element not found in force list
90139 = Forcing of variables not allowed in SAFE state
90140 = Overwriting of variables not allowed in SAFE state
90177 = Invalid pointer to synchronization structure
90178 = Project file processing failed
90179 = Error requesting memory compare value
90180 = Invalid pointer to memory compare data
90181 = Invalid memory compare data
90182 = Wrong memory compare version
90183 = Invalid global memory compare counter
90184 = No project file assigned
90185 = Invalid project file
90186 = Invalid physical address
90187 = Project does not match firmware (project header)
90188 = Wrong project header version number
90189 = Invalid user program (NULL pointer or no data)
90190 = Invalid type of user program
90191 = Insufficient program memory
90192 = Invalid pointer to code image header
90193 = Invalid function block instance data
90194 = Invalid pointer to data image header
90195 = Invalid pointer to cold start image header
90196 = Invalid pointer to warm start image header
90197 = Too many function calls
90198 = Too many function block instances
90199 = Too many marker variables
90200 = Invalid safe input length
90201 = Invalid non safe input length
90202 = Invalid device diagnostic input length
90203 = Invalid safe output length
90204 = Invalid non safe output length
90205 = Invalid device diagnostic output length
90206 = Project does not match firmware (FBK diag len)
90207 = Internal error
90208 = Internal error
90210 = Invalid safe input start offset
90211 = Invalid safe output start offset
90212 = Invalid non safe input start offset
90213 = Invalid non safe output start offset
90214 = Invalid device diagnostic input start offset
90215 = Invalid device diagnostic output start offset
90216 = Invalid function block diagnostic output start offset
90217 = Internal error
90218 = Internal error
90219 = Internal error
90220 = No C-function found with given function number
90221 = ID of C-function differs from installed C-function
90222 = Version of C-function differs from installed C-function
90223 = Stack size of C-function differs from installed C-function
90225 = Invalid C-function number
90226 = Installable C-functions limit exceeded
90227 = Internal error
90228 = Internal error
90229 = Internal error
90230 = Internal error
90231 = Invalid pointer to C-function data
90232 = Internal error
90233 = Internal error
90234 = Internal error
90235 = Internal error
90236 = Invalid physical I/O start address
90237 = Invalid physical non retain start address
90241 = The requested command could not be executed
90242 = Invalid operational mode
90243 = Invalid temperature at startup
90244 = No cold start init program available
90245 = No warm start init program available
90246 = User program stack overflow
90247 = Division by zero in user program
90248 = Unknown error in user program
90249 = No project available
90250 = Invalid SafePCOS2 status
90251 = modulo division by zero
90252 = arithmetic overflow
90305 = No program memory assigned by SafeOS
90306 = No stack memory assigned by SafeOS
90307 = Insufficient stack memory
90308 = Invalid system time
90309 = Invalid memory compare pointer
98560 = Internal function call error
98561 = Package transmission error
98562 = Memory allocation error
98563 = Memory allocation error
98564 = TX-buffer is used like a RX-buffer or vice-versa
98565 = No TX-buffer available
98566 = Buffer assignment mismatch
98817 = pointer check failed
99329 = Cycle time & Mode info not received
99330 = Cross communication error
99331 = Cross communication error
99332 = Cross communication error
99333 = Interrupt occurred too soon
99334 = Mode change communication error
99335 = interrupt too late
99336 = cycle time error
99337 = internal error 0x8409
99338 = Error in MFW_produce
99339 = Error in MFW_consume
99340 = Error in HNFcyc, EpsTx
99341 = Enabling execution of SafeOS failed
99342 = Upper cycle time violation
99343 = Incomplete unlock request
99344 = Cycle time exceeded
99345 = Maximum allowed quarz deviation violated
99346 = Error while sending C-library data
99347 = Error while receiving C-Library Data
99348 = Cross communication error (uP1)
99350 = Safety cycle time changed while in operational mode (µP1)
99351 = error storing local parameter data (uP1)
99456 = Execution time warning
99457 = firmware not certified
99458 = NULL pointer while unlocking
99584 = Invalid failsafe ID
99585 = Wrong processor ID
99586 = Event ID error
99587 = Unsupported event's component ID
99588 = access to NULL pointer in HNFevt_Fifo
99600 = SafeDESIGNER user info
99601 = SafeDESIGNER login
99602 = SafeDESIGNER logout
99605 = generic string message
99712 = Event FIFO full
99840 = Internal hardware test error (uP1)
99841 = Memory test failed
99842 = CPU test failed
99843 = init of MFW tests failed
99844 = register test failed
99845 = register test failed
99846 = error voltage monitoring
99847 = Stack or CRC test error
99848 = External hardware test error
99849 = Supply voltage error
99850 = Temperature error
99851 = internal error cross communication HWT
99852 = Supply voltage reached warning level.
99854 = MMU test detected an error
100097 = Module failsafe flags differ!
100098 = logger data synchronized
100099 = LogFile conversion on uPC activated
100100 = Real time set
100101 = Module restarted
100102 = Not yet used!
100103 = Error in SPI-communication
100104 = Error with external ADCs
100105 = Unknown command
100106 = error flash write
100352 = HNF firmware executed on wrong processor
100353 = SafeOS init call failed
100354 = Unable to open file for SafeOS init call
100355 = Unable to read file for SafeOS init call
100356 = init error
100357 = Init error loading library
100358 = Failure while executing MmuProtect
100368 = SDN mismatch
100369 = Task start failed
100374 = Program mismatch
100865 = Error encountered while closing file
100866 = Error encountered while opening file
100867 = Error encountered while reading from file
100868 = Error encountered while requesting file length
100869 = Error encountered while writing to file
100870 = Error encountered while accessing file system on uPC
100871 = Error encountered while reading directory
101120 = data or prefetch abort
101121 = Undefined opcode or irq or processor fault
101122 = Error while init of the protected C-functions
101123 = data abort
101124 = prefetch abort
101136 = Error at internal test interface
101360 = Dummy logbook entry
101377 = Communication buffer error
101378 = Malloc after init
101379 = Memory allocation error
101380 = Frame transfer to the processors API failed
101381 = Command execution error
101382 = Parameter length deceeded
101383 = Start of write command failed.
101384 = Parameters of write block are wrong
101385 = Accumulated block length doesn't match start info
101386 = invalid Firmware
101387 = Address of firmware is possibly invalid
101388 = Confirmation package buffer allocation error
101389 = Confirmation package buffer could'nt be sent
101390 = firmware check failed
101391 = Firmware not started
101392 = Bootloader sequencer state differs from expected value
101393 = Inconsistent parameters of send function
101394 = Invalid Flash ID
101395 = Invalid Flash RDID
101396 = BS IDENT check failed
101397 = Invalid Firmware startadress
101398 = Invalid Firmware endadress
101399 = Firmware is not valid
101400 = Fault during boot sequence
101401 = Error during firmware start
101408 = Wrong processor number
101409 = Wrong hardwareversion
101410 = Watchdog elapsed
101505 = Requested command not defined
102656 = Internal function call error
102657 = Package transmission error
102658 = Memory allocation error
102659 = Memory allocation error
102660 = TX-buffer is used like a RX-buffer or vice-versa
102661 = No TX-buffer available
102662 = Buffer assignment mismatch
103425 = Cycle time & Mode info not received
103426 = Cross communication error
103427 = Cross communication error
103428 = Cross communication error
103429 = Interrupt occurred too soon
103430 = Unable to send Modus switch!
103431 = interrupt too late
103432 = cycle time error
103433 = internal error 0x9409
103434 = Error in MFW_produce!
103435 = Error in MFW_consume
103436 = Error in HNFcyc, EpsTx
103438 = Upper cycle time violation (uP2)
103441 = Maximum allowed quarz deviation violated
103442 = Error while sending C-library data
103443 = Error while receiving C-Library Data
103444 = cross communication error (uP2)
103446 = safety cycle time changed while in operational (uP2)
103447 = error storing local parameter data (uP2)
103552 = execution time warning
103680 = Invalid failsafe ID
103681 = Wrong processor ID
103682 = Event ID error
103683 = Unsupported event's component ID
103684 = access to NULL pointer in HNFevt_Fifo
103808 = Event FIFO full
103936 = Internal hardware test error (uP2)
103937 = Memory test failed
103938 = CPU test failed
103939 = init of MFW tests failed
103940 = register tests failed
103941 = register test failed
103942 = error voltage monitoring
103943 = Stack or CRC test error (uP2)
103944 = External hardware test error
103945 = Supply voltage error
103946 = Temperature error
103947 = internal error cross communication HWT
103948 = Supply voltage reached warning level.
103950 = MMU test detected an error (uP2)
104193 = Module-Fail-Safe flags differ!
104194 = logger data synchronized
104195 = LogFile conversion on uPC activated!
104196 = Real Time set!
104197 = Module restarted
104198 = Not yet used!
104199 = Error in SPI-communication
104200 = Error with external ADCs
104201 = Unknown command
104202 = error flash write
104448 = HNF firmware executed on wrong processor
104449 = SafeOS init call failed (uP2)
104450 = Unable to open file for SafeOS init call
104451 = Unable to read file for SafeOS init call
104452 = init error
104453 = init error loading library (uP2)
104454 = Failure while executing MmuProtect
104961 = Error encountered while closing file
104962 = Error encountered while opening file!
104963 = Error encountered while red from file!
104964 = Error encountered while getting file len!
104965 = Error encountered while write into file!
104966 = Error encountered while access file system on uPC (uP2)
104967 = Error encountered while read directory!
105216 = data or prefetch abort
105217 = Undefined opcode or irq or processor fault (uP2)
105218 = Error while init of the protected C-functions
105219 = data abort (uP2)
105220 = pefetch abort (uP2)
105232 = Error at internal test interface
105456 = Dummy logbook entry
105473 = Communication buffer error
105474 = Malloc after init
105475 = Memory allocation error
105476 = Frame transfer to the processors API failed
105477 = Command execution error
105478 = Parameter length deceeded
105479 = Start of write command failed.
105480 = Parameters of write block are wrong
105481 = Accumulated block length doesn't match start info
105482 = invalid Firmware
105483 = Address of firmware is possibly invalid
105484 = Confirmation package buffer allocation error
105485 = Confirmation package buffer could'nt be sent
105486 = firmware check failed
105487 = Firmware not started
105488 = Bootloader sequencer state differs from expected value
105489 = Inconsistent parameters of send function
105490 = Invalid Flash ID
105491 = Invalid Flash RDID
105492 = BS IDENT check failed
105493 = Invalid Firmware startadress
105494 = Invalid Firmware endadress
105495 = Firmware is not valid
105496 = Fault during boot sequence
105497 = Error during firmware start
105504 = Wrong processor number
105505 = Wrong hardwareversion
105506 = Watchdog elapsed
105601 = Requested command not defined
106753 = Invalid parameter 'w_hdl' (0).
106754 = Invalid FSM state (0).
106755 = Invalid parameter 'w_hdl' (0).
106756 = Invalid FSM state (0).
106757 = Invalid event occurred (0h).
106758 = FSM state error (0).
106759 = SOD read error. SafeKEY empty?
106760 = SOD write error in function
106761 = Invalid precondition (0).
106762 = Invalid SNMT State (0) received from SNMTM.
106763 = Invalid SNMT State (0) received from SNMTM.
106766 = SDO abort received
106767 = SDO abort received from node
106768 = Additional parameters with invalid version found
106769 = Additional parameters for wrong SADR found
106770 = Additional parameter set is too short
106771 = Requested additional parameters are not available
107009 = Object 0x1200, 0x01 (SDN) was accessed with attribute <SOD_k_ATTR_BEF_RD>. This attribute is illegal object SDN.
107265 = Inconsistence between data length (00 bytes) and frame length (00 bytes), if the frame uses CRC8.
107266 = Inconsistence between data length (00 bytes) and frame length (00 bytes), if the frame uses CRC16.
107267 = The value in the LE field (00)of the received frame exceed valid range.
107268 = The received EPLS frame contains different frame Id's in sub frame ONE (0) and in sub frame TWO (0).
107269 = The value in the LE field (00) of the received frame exceeds valid range (<= k_MAX_DATA_LEN).
107270 = The payload data of sub frame one and two is not equal.
107271 = The checksum (CRC8) of sub frame one (00) is NOT correct.
107272 = The checksum (CRC16) of sub frame one (0000) is NOT correct.
107273 = The checksum (CRC8) of sub frame two (00) is NOT correct.
107274 = The checksum (CRC16) of sub frame two (0000) is NOT correct.
107275 = The type of data (00) to be copied is NOT defined.
107276 = The received frame length (0000) is NOT correct.
107277 = The received address (00) in the ADR field of EPLS sub frame one is invalid.
107278 = The received domain number (0000) in the ADR field of EPLS sub frame two is invalid.
107279 = The value in the ADR field (0000) of the frame to be transmitted is NOT correct.
107280 = The frame ID (0000) of the frame to be transmitted is NOT correct.
107281 = The domain number (0000) of the frame to be transmitted is NOT correct.
107282 = The payload data length (0000) of the frame to be transmitted is NOT correct.
107283 = The time request address (0000) of the frame to be transmitted is NOT correct.
107284 = The time request distinctive number (00) of the frame to be transmitted is NOT correct.
107285 = The frame length (0000) provided by the application is an even number, which is NOT possible.
107286 = No memory block for frame transmission available from unit SHNF.
107287 = Memory block for frame transmission cannot be passed to unit SHNF.
107288 = The received address (00) in the TADR field of EPLS sub frame one is invalid.
107289 = Before read callback is registered for the UDID of the SCM SOD object with index 0x1200 and sub-index 0x04
107459 = -
107475 = -
107715 = -
107731 = -
107777 = Unexpected FSM event (00) occurred.
107778 = An Invalid transition into SN state 00 is requested.
107779 = NULL pointer passed instead of reference to <UDID>.
107780 = Function call with invalid additional SADR (0000).
107781 = Function call with invalid SPDO number (0000).
107782 = No FSM available to process the SNMT Request, actually.
107783 = No FSM available to process the SNMT Request, actually.
107784 = No FSM available to process the SNMT Request, actually.
107785 = No FSM available to process the SNMT Request, actually.
107786 = No FSM available to process the SNMT Request, actually.
107787 = Maximum number of SNMT Service Request repetitions of service (00) reached.
107788 = The received SNMT Service Response with ID 00 could NOT be assigned.
107789 = The received SNMT Service Response contains an invalid frame ID (00).
107790 = The received SNMT Service Response was rejected by SNMTM filter - target address: 0000.
107791 = The value in TR field (00) of the received frame is NOT zero.
107792 = The value in CT field (0000) of the received frame is NOT zero.
107793 = FSM was called with invalid event in state <wait for requets>.
107794 = No FSM available to process the SNMT Request, actually.
108033 = The provided instance number (00) is bigger than the maximum value.
108034 = NULL pointer passed instead of reference to <number of free management frames>.
108035 = NO management frames available to build and transmit.
108036 = The provided instance number (00) is bigger than the maximum value.
108037 = The provided instance number (00) is bigger than the maximum value.
108038 = Error group 4 was passed by the application.(Reserved for EPLS Stack internal errors).
108039 = The provided instance number (00) is bigger than the maximum value.
108040 = The value in LE field (00) of the received Service <UDID Request> is NOT valid.
108041 = Payload length of the extended SNMT service request is 0.
108042 = The frame ID (00) of the received SNMT Service is NOT defined.
108043 = The value in LE field (00) of the received Service <SN set to PRE-OP> is NOT valid.
108044 = The value in LE field (00) of the received Service <SN set to OP> is NOT valid.
108045 = The value in LE field (00) of the received Service <SCM set to STOP> is NOT valid.
108046 = The value in LE field (00) of the received Service <SCM set to OP> is NOT valid.
108047 = The value in LE field (00) of the received Service <Node Guarding> is NOT valid.
108048 = The value in LE field (00) of the received Service <Add. SADR Assignment> is NOT valid.
108049 = It is only one transmit SPDO configurable. Assignment of the additional SADR can not be accomplished
108050 = The value in LE field (00) of the received Service <Error Acknowledge> is NOT valid.
108051 = The value in LE field (00) of the received Service <UDID of SCM assignment> is NOT valid.
108052 = The extended service type (00) of the received SNMT Service is NOT defined.
108053 = The value in CT field (0000) of the received frame is NOT zero.
108054 = The value in TR field (00) of the received frame is NOT zero.
108055 = The received SNMT Service was rejected by SNMTS filter - target address: 0 safety domain number: 0
108056 = The value in LE field (00) of the received Service <SADR Assignment> is NOT valid.
108057 = Received UDID is NOT equal to the UDID of this SN.
108058 = The provided instance number (00) is bigger than the maximum value.
108059 = The provided state pointer is NULL.
108060 = Undefined FSM state (00) occurred.
108061 = Unexpected FSM event (00) occurred.
108062 = k_EVT_RX_SET_TO_OP event is unexpected.
108063 = k_EVT_RX_UDID_SCM event is unexpected.
108064 = k_EVT_RX_SADR_ADD event is unexpected.
108065 = k_EVT_SN_ACK event is unexpected.
108066 = k_EVT_RX_SET_TO_PREOP event is unexpected.
108067 = Unexpected FSM event (00) occurred.
108068 = k_EVT_RX_SADR_ADD event is unexpected.
108069 = Unexpected FSM event (00) occurred.
108070 = k_EVT_RX_SET_TO_PREOP event is unexpected.
108071 = k_EVT_SN_ACK event is unexpected.
108072 = k_EVT_RX_SET_TO_OP event is unexpected.
108073 = k_EVT_RX_SADR_ADD event is unexpected.
108074 = Unexpected FSM event (00) occurred.
108075 = k_EVT_RX_UDID_SCM event is unexpected.
108076 = Unexpected FSM event (00) occurred.
108077 = k_EVT_RX_UDID_SCM event is unexpected.
108078 = Unexpected FSM event (00) occurred.
108079 = k_EVT_RX_SADR_ADD event is unexpected.
108080 = k_EVT_RX_SET_TO_PREOP event is unexpected.
108081 = k_EVT_RX_UDID_SCM event is unexpected.
108082 = Unexpected FSM event (00) occurred.
108083 = k_EVT_RX_SADR_ADD event is unexpected.
108084 = k_EVT_RX_SET_TO_PREOP event is unexpected.
108085 = k_EVT_RX_UDID_SCM event is unexpected.
108086 = Unexpected FSM event (00) occurred.
108087 = k_EVT_RX_SADR_ADD event is unexpected.
108088 = k_EVT_RX_SET_TO_PREOP event is unexpected.
108089 = k_EVT_RX_UDID_SCM event is unexpected.
108090 = Unexpected FSM event (00) occurred.
108091 = k_EVT_RX_SADR_ADD event is unexpected.
108092 = k_EVT_RX_SET_TO_PREOP event is unexpected.
108093 = k_EVT_RX_UDID_SCM event is unexpected.
108094 = Unexpected FSM event (00) occurred.
108095 = k_EVT_RX_SADR_ADD event is unexpected.
108096 = k_EVT_SN_ACK event is unexpected.
108097 = Unexpected FSM event (00) occurred.
108098 = Unexpected FSM event (00) occurred.
108099 = The rx and the tx buffer pointer must not be NULL with the (00) calling event.
108100 = The received SPDO number (00) is NOT in valid range.
108101 = No SOD index can be found for the SPDO number (00).
108102 = The received checksum (0000) is NOT equal to calculated checksum (0000).
108103 = The received parameter timestamp (00000000) is wrong.
108104 = The guard timer was not started but checked.
108105 = The lifetime elapsed.
108106 = The refresh time elapsed.
108107 = Unexpected error group and/or error code were received Exp. error group : (00) error code : (00) Rec. error group : (00) error code : (00)
108108 = Unexpected SN ack received (no SN FAIL was sent).
108289 = Instance number is invalid. SSDO abort code : 0
108290 = The object with standard data type (UINT8/16/32, INT8/16/32, REAL32, BOOLEAN), must not be accessed segmented (offset and size must be 0). SSDO abort code : 0
108291 = The byte position is outside of the object data range (offset or/and size are wrong). SSDO abort code : 0
108292 = The SAPL_SOD_ReadClbk() application callback function has signaled error SSDO abort code : 0
108293 = Instance number is invalid SSDO abort code : 0
108294 = Pointer to the data to be written is NULL SSDO abort code : 0
108295 = The SOD write access is disabled by the application SSDO abort code : 0
108296 = The object with standard data type (UINT8/16/32, INT8/16/32, REAL32, BOOLEAN), must not be accessed segmented (offset and size must be 0) SSDO abort code : 0
108297 = The byte position is outside of the object data range (offset or/and size are wrong) SSDO abort code : 0
108298 = The SAPL_SOD_WriteClbk() application callback function has signaled error SSDO abort code : 0
108299 = The object is not writeable SSDO abort code : 0
108300 = Invalid visible string. SSDO abort code : 0
108301 = The value to be written is too high SSDO abort code : 0
108302 = The value to be written is too low. SSDO abort code : 0
108303 = The value to be written is not BOOLEAN value (0 or 1) SSDO abort code : 0
108304 = Data type is unknown SSDO abort code : 0
108305 = Before Read SOD Callback was aborted. SSDO abort code : 0
108306 = Before Write SOD Callback was aborted SSDO abort code : 0
108307 = After Write SOD Callback was aborted SSDO abort code : 0
108308 = Instance number is invalid SSDO abort code : 0
108309 = Actual length of the SOD entry can not be set by the application SSDO abort code : 0
108310 = Actual length to be set is larger than the maximum length of the object SSDO abort code : 0
108311 = Actual length is tried to set for an object with standard data type. Actual length can be set only for the objects with data type DOMAIN, OCTET STRING or VISIBLE STRING SSDO abort code : 0
108312 = Instance number is invalid. SSDO abort code : 0
108313 = Pointer to the actual length is NULL. SSDO abort code : 0
108314 = Actual length of the SOD entry can not be get by the application. SSDO abort code : 0
108315 = Reference to the object dictionary is NULL.
108316 = Object dictionary is empty at the instance (0).
108317 = Instance number is invalid. SSDO abort code : 0
108318 = Pointer to the object handle is NULL. SSDO abort code : 0
108319 = Pointer to the application object is NULL. SSDO abort code : 0
108320 = The SAPL_SOD_AttrGetClbk() application callback function has signaled error. SSDO abort code : 0
108321 = The SOD object was not found. SSDO abort code : 0
108322 = Instance number is invalid. SSDO abort code : 0
108323 = Pointer to the object handle is NULL. SSDO abort code : 0
108324 = Object handle address does not point to a SOD object. SSDO abort code : 0
108325 = Instance number is invalid. SSDO abort code : 0
108326 = Access to the SOD object is locked. SSDO abort code : 0
108327 = Application object is not able to be locked. SSDO abort code : 0
108328 = Instance number is invalid. SSDO abort code : 0
108329 = SOD_Unlock() was called without SOD_Lock(). SSDO abort code : 0
108330 = Application object is not able to be unlocked. SSDO abort code : 0
108331 = Instance number is invalid. SSDO abort code : 0
108332 = SOD_EnableSodWrite() was called without SOD_DisableSodWrite(). SSDO abort code : 0
108333 = Instance number is invalid. SSDO abort code : 0
108334 = SOD write access is already disabled. SSDO abort code : 0
108335 = The SAPL_SOD_DefaultValueSetClbk() application callback function has signaled error.
108336 = Range checking is not supported for the object with SOD index (0) sub-index (0).
108337 = No object data pointer has been defined for the object with SOD index (0) sub-index(0).
108338 = No pointer to pointer to object data has been defined for the object with SOD index (0) sub-index (0).
108339 = The object with SOD index (0) sub-index (0) is not sorted by SOD index.
108340 = The object with SOD index (0) sub-index (0) is not sorted by SOD sub-index.
108341 = The attribute of the object with SOD index (0) sub-index (0) is invalid.
108342 = No access flag (RO_CONST,RO,WO) in the attribute of the object with SOD index (0) sub-index (0) is set.
108343 = Access flags (RO_CONST,RO,WO) in the attribute of the object with SOD index (0) sub-index (0) is set.
108344 = No default value has been given for the object with SOD index (0) sub-index (0).
108345 = Flag to call a callback function is set in the attribute of the object with SOD index (0) sub-index (0) but no callback function pointer is given.
108346 = Callback function pointer is given for the object with SOD index (0) sub-index (0) but no flag to call a callback function is set in the attribute entry.
108347 = The given range for the object with SOD index (0) sub-index (0) is wrong, because the maximum value is smaller the minimum value.
108348 = Data type is (UINT8 or INT8 or BOOLEAN) of the object with SOD index (0) sub-index (0) but the data length is not 1.
108349 = Data type is (UINT16 or INT16) of the object with SOD index (0) sub-index (0) but the data length is not 2.
108350 = Data type is (UINT32 or INT32 or REAL32) of the object with SOD index (0) sub-index (0) but the data length is not 4.
108351 = Data type is (DOMAIN or VISIBLE/OCTET STRING) of the object with SOD index (0) sub-index (0) but the maximum data length is 0.
108352 = Data type is (UINT64 or INT64 or REAL64) of the object with SOD index (0) sub-index (0) but the data length is not 8.
108353 = Data type of the object with SOD index (0) sub-index (0) is not supported .
108354 = Data type of the object with SOD index (0) sub-index (0) is not supported .
108545 = (0) instance number is invalid.
108546 = (0) instance number is invalid.
108547 = Pointer to the number of free frames counter is NULL.
108548 = (0) instance number is invalid.
108549 = Pointer to the received frame is NULL.
108550 = The received safety domain number (0) is unknown.
108551 = The received frame identifier (0) is invalid.
108552 = The length of the received frame (0) is invalid.
108553 = Instance number (000) is invalid.
108554 = Tx SPDO (0) is invalid.
108555 = There is a gap before the Tx SPDO with SOD index (0).
108556 = No Tx SPDO communication parameter is defined with SOD index (0) sub-index (0) for the Tx SPDO mapping parameter with SOD index (0) sub-index (0).
108557 = No mandatory Tx SPDO is defined.
108558 = Too many Tx SPDOs are defined.
108559 = Before write flag is not set in the Tx SPDO attribute with SOD index (0) sub-index (0).
108560 = There is a gap before the Rx SPDO with SOD index (0).
108561 = No Rx SPDO communication parameter is defined with SOD index (0) sub-index (0) for the Tx SPDO mapping parameter with SOD index (0) sub-index (0).
108562 = Too many Rx SPDOs are defined.
108563 = Before write flag is not set in the Rx SPDO attribute with SOD index (0) sub-index (0).
108564 = Target Address is already used or invalid. Tx SPDO number (0x1).
108565 = Tx SPDO with SPDO number (1) is used only for sending SPDO Time Request and not for sending SPDO Time Response.
108566 = Sending request type (k_SENDING_FREE) is invalid.
108567 = Sending request type (0) is invalid.
108568 = Pointer to the counter of the free frames is NULL.
108569 = Before read attribute must not be set for the object with SOD index (0) sub-index (0).
108570 = Tx SPDO object with SOD index (0) sub-index (0) is not supported.
108571 = Source Address is already used or invalid. Rx SPDO number (0x1).
108572 = SPDO Time Response was received without sending a SPDO Time Request (late SPDO time response) on the Rx SPDO with SPDO number (1).
108573 = Number of not answered TR expired at the Rx SPDO with SPDO number (1)
108574 = SPDO Time Request Cycle time is expired for the Rx SPDO with SPDO number (1) in the k_STATE_WF_TRES state.
108575 = SPDO Time Request Cycle time is expired for the Rx SPDO with SPDO number (1) in the k_STATE_WF_NEXT_TREQ_BLOCK state.
108576 = Late SPDO Time Response was received on the Rx SPDO with SPDO number (1)
108577 = The time synchronization consumer state machine of the Rx SPDO with SPDO number (1) is in unknown state
108578 = SCT timer is expired for the Rx SPDO with SPDO number (1)
108579 = The SPDO propagation delay (0) received on the Rx SPDO with SPDO number (1) is too short.
108580 = The SPDO propagation delay (0) received on the Rx SPDO with SPDO number (1) is too long.
108581 = Before read attribute must not be set for the object with SOD index (0) sub-index (0).
108582 = Rx SPDO object with SOD index (0) sub-index (0) is not supported.
108583 = SPDO time synchronization propagation delay (0) is too short.
108584 = SPDO time synchronization propagation delay (0) is too long.
108585 = TR (0) in the SPDO Time Response received on the Rx SPDO number (1) is invalid.
108586 = Before write flag is not set for the Tx SPDO object with SOD index (0) sub-index (0).
108587 = Too many Tx SPDO mapping entries are defined for the Tx SPDO with SOD index (0) sub-index (0).
108588 = SOD object is not mappable for the Tx SPDO. SSDO abort code (0).
108589 = Before write flag is not set for the Rx SPDO object with SOD index (0) sub-index (0).
108590 = Too many Rx SPDO mapping entries are defined for the Rx SPDO with number (0x1) sub-index (0).
108591 = SOD object is not mappable for the Rx SPDO. SSDO abort code (0).
108592 = Rx SPDO received with wrong payload size (0) for the Rx SPDO with SPDO number (1).
108593 = Payload size is too large for the Tx SPDO with SPDO number (1).
108594 = SOD mapping entry at SOD sub-index (0) for the Tx SPDO with SPDO number (1) is not mappable because of a SOD error.
108595 = Number of the mapped entries is too large for the Tx SPDO with SPDO number (1).
108596 = Payload size is too large for the Rx SPDO with SPDO number (1).
108597 = SOD mapping entry at SOD sub-index (0) for the Rx SPDO with SPDO number (1) is not mappable because of a SOD error.
108598 = Number of the mapped entries is too large for the Rx SPDO with SPDO number (1).
108599 = SOD service (0) is ignored.
108600 = SOD service (0) is ignored.
108601 = Tx SPDO (0) is not configured.
108602 = Tx SPDO (0) is not defined in the SOD.
108603 = Tx SPDO (0) is invalid.
108604 = The RxSPDO cannot get connected to its TxSPDO
108605 = Invalid instance number.
108606 = Invalid RxSPDO number
108607 = Zero pointer.
108801 = The delivered instance (00) is bigger than <EPLS_cfg_MAX_INSTANCES>!
108802 = Pointer to number of free management frames refers to NULL!
108803 = Telegram type (00) of received EPLS frame is not defined!
108804 = No SCM present, not able to process SSDO Service Request with ID (00)!
108805 = No SCM present, not able to process SNMT Service Request with ID (00)!
108806 = Stack called without EPLS frame to process!
108807 = The length of the received frame (0) is invalid.
108808 = New EPLS frame cannot be processed, Stack is busy!
108809 = The SSC FSM switched into an undefined state (00)!
108810 = The delivered instance (00) is bigger than <EPLS_cfg_MAX_INSTANCES>!
109057 = NULL pointer passed instead of reference to <request struct of transfer data>.
109058 = Function call with invalid target address (SADR) of SSDO Service Request (0000).
109059 = NULL pointer passed instead of reference to <data to be written into a SOD>.
109060 = Function call with invalid maximum payload data length (00).
109061 = NULL pointer passed instead of reference to <Response callback function>.
109062 = NULL pointer passed instead of reference to <request struct of transfer data>.
109063 = Function call with invalid target address (SADR) of SSDO Service Request (0000).
109064 = Reference to the response buffer is NULL.
109065 = Function call with invalid maximum payload data length (00).
109066 = NULL pointer passed instead of reference to <Response callback function>.
109067 = Length of the response buffer size (0000) is invalid.
109068 = The b_payloadLen is smaller then 12 byte and the UINT64, INT64 and REAL64 data type must not be segmented.
109069 = Function call with invalid data type of SSDO Service Request (00).
109070 = The received SSDO Service Response with ID 00 could NOT be assigned.
109071 = The protocol FSM was called in the k_ST_WF_REQ_TRANS state
109072 = The data length (00) of the expedited init upload response frame is invalid. Frame is ignored.
109073 = The object size (00) in the init segmented upload response frame is invalid. Frame is ignored.
109074 = The data length (00) of the init segmented upload response frame is invalid. Frame is ignored.
109075 = The data length (00) of the middle segmented upload response frame is invalid. Frame is ignored.
109076 = The data length (00) of the end segmented upload response frame is invalid. Frame is ignored.
109077 = Upload end segment response (k_UPLD_SEG_END) received in the state 'wait for middle segment' (k_ST_WF_UPLD_RESP_MID_SEG).
109078 = The rest raw data length (00) in the end segmented upload response is wrong. Frame is ignored.
109079 = The data length (00) of the end segmented upload response frame is invalid. Frame is ignored.
109080 = The data length (00) of the expedited download response frame is invalid. Frame is ignored.
109081 = The data length (00) of the init segmented download response frame is invalid. Frame is ignored.
109082 = The data length (00) of the middle segmented download response frame is invalid. Frame is ignored.
109083 = The data length (00) of the end segmented download response frame is invalid. Frame is ignored.
109084 = Undefined Protocol FSM state (00).
109085 = NO Protocol FSM is available, actually.
109086 = SSDO Service Response with invalid toggle bit in SOD Access Command (SACmd) received.
109087 = SSDO Service Response with invalid object index received.
109088 = SSDO Service Response with invalid object sub index received.
109089 = The data length (00) of the response frame is invalid (< k_DATA_HDR_LEN). Frame is ignored.
109090 = The data length (00) of the abort response frame is invalid. Frame is ignored.
109091 = SSDO Service Response with invalid SOD Access Command (SACmd) received.
109092 = The rest raw data length (00) in the end segmented upload response is wrong. Frame is ignored.
109093 = Undefined FSM event (00) in Service FSM call.
109094 = Undefined FSM event (00) in Service FSM call.
109095 = SSDO transfer is already running with the SN (source address = 00).
109096 = The value in TR field (00) of the received SSDO frame is NOT zero.
109097 = SSDO Service Response with invalid SOD Access Request number (SANo) received (exp : 00 rec : 00).
109313 = The received SSDO Service was rejected by SSDOS filter - target address: 0 safety domain number: 0
109314 = The TR field (0) in the received SSDO Service is invalid.
109315 = Undefined FSM state (00) in FSM call.
109316 = Abort frame received from the SSDOC with abort code : (00).
109317 = The payload length (00) in the initiate upload request frame received from the SSDOC is wrong.
109318 = The payload length (00) in the abort frame received from the SSDOC is wrong.
109319 = Wrong SOD access command (00) received from the SSDOC.
109320 = The payload length (00) in the SSDO frame received from the SSDOC is wrong.
109321 = Invalid SOD access command (00) was set by the EPLS SW.
109322 = The payload length (00) in the SSDO frame received from the SSDOC is wrong.
109323 = Invalid SOD access command (00) was set by the EPLS SW.
109324 = The payload length (00) in the SSDO frame received from the SSDOC is wrong.
109325 = The payload length (00) in the SSDO frame received from the SSDOC is not equal to 4.
109326 = The addressed SOD entry is not matching to the number of payload bytes of the requested expedited transfer.
109327 = The maximum length of the addressed SOD entry is smaller than the length of the data to be written.
109328 = The addressed SOD entry is not matching to the number of payload bytes of the requested segmented transfer.
109329 = The SSDOC request payload length is too small.
109330 = Raw data length in the download middle segment is wrong
109331 = Raw data length in the download end segment is wrong
109332 = SOD_Write() was called to write a segment without locking the SOD
109333 = SSDO Service Request received with inconsistant index or sub index.
109334 = SSDO Service Request with invalid toggle bit received.
109335 = SSDO Service Request for download received, because the write access is disabled.
109336 = SSDO Service Request for download received, because the SOD is locked.
109337 = SSDO Service Request for download received, because the active instance is not in PRE_OPERATIONAL state.
109338 = SSDO Service Request for download received, because an other instance is in OPERATIONAL state.
110337 = internal cross communication error EPS
110338 = Checksum comparison buffer is full
110339 = Checksum send buffer is full
110340 = No checksum send buffer available
110341 = No checksum receive buffer available
110342 = Received crc buffer length is not equal to the sent crc buffer length
110343 = Received crc data is not equal to sent crc data
110344 = Wrong CTB got inserted into the SOD
110345 = Error during crc calculation
110346 = Invalid tx frame
110347 = Invalid instance should go to operational
110348 = Module initialization failed
110349 = SPDO tx telegram allocation failed
110350 = SSDO tx telegram allocation failed
110354 = Insufficient data length in parameter string
110355 = Invalid data type in parameter string
110356 = Invalid object in parameter string
110357 = Zero pointer in cyclic function
110358 = Zero pointer for CT in SOD
110359 = Zero pointer for parameters in SOD
110360 = Error while loading the parameter file.
110361 = Info internal file conversion
110362 = Invalid parameter CRC
110363 = Error while loading the additional parameter file.
110364 = state change - pre operational to operational
110365 = state change - operational to pre operational
110400 = SNfail received
110401 = storing the SADR-DVI list did not work
110402 = zero ptr in SOD machine option callback
110403 = state change to operational
110404 = state change to pre-operational
110405 = same input field byte was mapped twice
110406 = same output field byte was mapped twice
110407 = invalid mapping entry
110408 = SPDO tx queue is full
110409 = Invalid instance should calculate the CRC
110410 = No program flow counter send buffer available
110411 = No CRC calc done bits send buffer available
110412 = Ptr to crc shadow buffer is wrong
110414 = internal error (nilptr check)
110432 = counter of invalid safety frames has increased
110433 = counter for SPDO errors has increased (uP1)
110434 = Connection statistic counter has changed.
110435 = Error when initializing the external machine options.
110436 = Input area of machine options already reserved.
110437 = external machine options data available but not needed
110438 = external machine options missing
110439 = status error external machine options
110440 = Error concerning the SafeModuleOk channels
110849 = Invalid parameter 'w_hdl' (0).
110850 = Invalid FSM state (0).
110851 = Invalid parameter 'w_hdl' (0).
110852 = Invalid FSM state (0).
110853 = Invalid event occurred (0h).
110854 = FSM state error (0).
110855 = SOD read error. SafeKEY empty?
110856 = SOD write error in function
110857 = Invalid precondition (0).
110858 = Invalid SNMT State (0) received from SNMTM.
110859 = Invalid SNMT State (0) received from SNMTM.
111105 = Object 0x1200, 0x01 (SDN) was accessed with attribute <SOD_k_ATTR_BEF_RD>. This attribute is illegal object SDN.
111361 = Inconsistence between data length (00 bytes) and frame length (00 bytes), if the frame uses CRC8.
111362 = Inconsistence between data length (00 bytes) and frame length (00 bytes), if the frame uses CRC16.
111363 = The value in the LE field (00)of the received frame exceed valid range.
111364 = The received EPLS frame contains different frame Id's in sub frame ONE (0) and in sub frame TWO (0).
111365 = The value in the LE field (00) of the received frame exceeds valid range (<= k_MAX_DATA_LEN).
111366 = The payload data of sub frame one and two is not equal.
111367 = The checksum (CRC8) of sub frame one (00) is NOT correct.
111368 = The checksum (CRC16) of sub frame one (0000) is NOT correct.
111369 = The checksum (CRC8) of sub frame two (00) is NOT correct.
111370 = The checksum (CRC16) of sub frame two (0000) is NOT correct.
111371 = The type of data (00) to be copied is NOT defined.
111372 = The received frame length (0000) is NOT correct.
111373 = The received address (00) in the ADR field of EPLS sub frame one is invalid.
111374 = The received domain number (0000) in the ADR field of EPLS sub frame two is invalid.
111375 = The value in the ADR field (0000) of the frame to be transmitted is NOT correct.
111376 = The frame ID (0000) of the frame to be transmitted is NOT correct.
111377 = The domain number (0000) of the frame to be transmitted is NOT correct.
111378 = The payload data length (0000) of the frame to be transmitted is NOT correct.
111379 = The time request address (0000) of the frame to be transmitted is NOT correct.
111380 = The time request distinctive number (00) of the frame to be transmitted is NOT correct.
111381 = The frame length (0000) provided by the application is an even number, which is NOT possible.
111382 = No memory block for frame transmission available from unit SHNF.
111383 = Memory block for frame transmission cannot be passed to unit SHNF.
111384 = The received address (00) in the TADR field of EPLS sub frame one is invalid.
111385 = Before read callback is registered for the UDID of the SCM SOD object with index 0x1200 and sub-index 0x04
111873 = Unexpected FSM event (00) occurred.
111874 = An Invalid transition into SN state 00 is requested.
111875 = NULL pointer passed instead of reference to <UDID>.
111876 = Function call with invalid additional SADR (0000).
111877 = Function call with invalid SPDO number (0000).
111878 = No FSM available to process the SNMT Request, actually.
111879 = No FSM available to process the SNMT Request, actually.
111880 = No FSM available to process the SNMT Request, actually.
111881 = No FSM available to process the SNMT Request, actually.
111882 = No FSM available to process the SNMT Request, actually.
111883 = Maximum number of SNMT Service Request repetitions of service (00) reached.
111884 = The received SNMT Service Response with ID 00 could NOT be assigned.
111885 = The received SNMT Service Response contains an invalid frame ID (00).
111886 = The received SNMT Service Response was rejected by SNMTM filter - target address: 0000.
111887 = The value in TR field (00) of the received frame is NOT zero.
111888 = The value in CT field (0000) of the received frame is NOT zero.
111889 = FSM was called with invalid event in state <wait for requets>.
111890 = No FSM available to process the SNMT Request, actually.
112129 = The provided instance number (00) is bigger than the maximum value.
112130 = NULL pointer passed instead of reference to <number of free management frames>.
112131 = NO management frames available to build and transmit.
112132 = The provided instance number (00) is bigger than the maximum value.
112133 = The provided instance number (00) is bigger than the maximum value.
112134 = Error group 4 was passed by the application.(Reserved for EPLS Stack internal errors).
112135 = The provided instance number (00) is bigger than the maximum value.
112136 = The value in LE field (00) of the received Service <UDID Request> is NOT valid.
112137 = Payload length of the extended SNMT service request is 0.
112138 = The frame ID (00) of the received SNMT Service is NOT defined.
112139 = The value in LE field (00) of the received Service <SN set to PRE-OP> is NOT valid.
112140 = The value in LE field (00) of the received Service <SN set to OP> is NOT valid.
112141 = The value in LE field (00) of the received Service <SCM set to STOP> is NOT valid.
112142 = The value in LE field (00) of the received Service <SCM set to OP> is NOT valid.
112143 = The value in LE field (00) of the received Service <Node Guarding> is NOT valid.
112144 = The value in LE field (00) of the received Service <Add. SADR Assignment> is NOT valid.
112145 = It is only one transmit SPDO configurable. Assignment of the additional SADR can not be accomplished
112146 = The value in LE field (00) of the received Service <Error Acknowledge> is NOT valid.
112147 = The value in LE field (00) of the received Service <UDID of SCM assignment> is NOT valid.
112148 = The extended service type (00) of the received SNMT Service is NOT defined.
112149 = The value in CT field (0000) of the received frame is NOT zero.
112150 = The value in TR field (00) of the received frame is NOT zero.
112151 = The received SNMT Service was rejected by SNMTS filter - target address: 0 safety domain number: 0
112152 = The value in LE field (00) of the received Service <SADR Assignment> is NOT valid.
112153 = Received UDID is NOT equal to the UDID of this SN.
112154 = The provided instance number (00) is bigger than the maximum value.
112155 = The provided state pointer is NULL.
112156 = Undefined FSM state (00) occurred.
112157 = Unexpected FSM event (00) occurred.
112158 = k_EVT_RX_SET_TO_OP event is unexpected.
112159 = k_EVT_RX_UDID_SCM event is unexpected.
112160 = k_EVT_RX_SADR_ADD event is unexpected.
112161 = k_EVT_SN_ACK event is unexpected.
112162 = k_EVT_RX_SET_TO_PREOP event is unexpected.
112163 = Unexpected FSM event (00) occurred.
112164 = k_EVT_RX_SADR_ADD event is unexpected.
112165 = Unexpected FSM event (00) occurred.
112166 = k_EVT_RX_SET_TO_PREOP event is unexpected.
112167 = k_EVT_SN_ACK event is unexpected.
112168 = k_EVT_RX_SET_TO_OP event is unexpected.
112169 = k_EVT_RX_SADR_ADD event is unexpected.
112170 = Unexpected FSM event (00) occurred.
112171 = k_EVT_RX_UDID_SCM event is unexpected.
112172 = Unexpected FSM event (00) occurred.
112173 = k_EVT_RX_UDID_SCM event is unexpected.
112174 = Unexpected FSM event (00) occurred.
112175 = k_EVT_RX_SADR_ADD event is unexpected.
112176 = k_EVT_RX_SET_TO_PREOP event is unexpected.
112177 = k_EVT_RX_UDID_SCM event is unexpected.
112178 = Unexpected FSM event (00) occurred.
112179 = k_EVT_RX_SADR_ADD event is unexpected.
112180 = k_EVT_RX_SET_TO_PREOP event is unexpected.
112181 = k_EVT_RX_UDID_SCM event is unexpected.
112182 = Unexpected FSM event (00) occurred.
112183 = k_EVT_RX_SADR_ADD event is unexpected.
112184 = k_EVT_RX_SET_TO_PREOP event is unexpected.
112185 = k_EVT_RX_UDID_SCM event is unexpected.
112186 = Unexpected FSM event (00) occurred.
112187 = k_EVT_RX_SADR_ADD event is unexpected.
112188 = k_EVT_RX_SET_TO_PREOP event is unexpected.
112189 = k_EVT_RX_UDID_SCM event is unexpected.
112190 = Unexpected FSM event (00) occurred.
112191 = k_EVT_RX_SADR_ADD event is unexpected.
112192 = k_EVT_SN_ACK event is unexpected.
112193 = Unexpected FSM event (00) occurred.
112194 = Unexpected FSM event (00) occurred.
112195 = The rx and the tx buffer pointer must not be NULL with the (00) calling event.
112196 = The received SPDO number (00) is NOT in valid range.
112197 = No SOD index can be found for the SPDO number (00).
112198 = The received checksum (0000) is NOT equal to calculated checksum (0000).
112199 = The received parameter timestamp (00000000) is wrong.
112200 = The guard timer was not started but checked.
112201 = The lifetime elapsed.
112202 = The refresh time elapsed.
112203 = Unexpected error group and/or error code were received Exp. error group : (00) error code : (00) Rec. error group : (00) error code : (00)
112204 = Unexpected SN ack received (no SN FAIL was sent).
112385 = Instance number is invalid. SSDO abort code : 0
112386 = The object with standard data type (UINT8/16/32, INT8/16/32, REAL32, BOOLEAN), must not be accessed segmented (offset and size must be 0). SSDO abort code : 0
112387 = The byte position is outside of the object data range (offset or/and size are wrong). SSDO abort code : 0
112388 = The object is not readable SSDO abort code : 0
112389 = The SAPL_SOD_ReadClbk() application callback function has signaled error SSDO abort code : 0
112390 = Instance number is invalid SSDO abort code : 0
112391 = Pointer to the data to be written is NULL SSDO abort code : 0
112392 = The SOD write access is disabled by the application SSDO abort code : 0
112393 = The object with standard data type (UINT8/16/32, INT8/16/32, REAL32, BOOLEAN), must not be accessed segmented (offset and size must be 0) SSDO abort code : 0
112394 = The byte position is outside of the object data range (offset or/and size are wrong) SSDO abort code : 0
112395 = The SAPL_SOD_WriteClbk() application callback function has signaled error SSDO abort code : 0
112396 = The object is not writeable SSDO abort code : 0
112397 = Invalid visible string. SSDO abort code : 0
112398 = The value to be written is too high SSDO abort code : 0
112399 = The value to be written is too low. SSDO abort code : 0
112400 = The value to be written is not BOOLEAN value (0 or 1) SSDO abort code : 0
112401 = Data type is unknown SSDO abort code : 0
112402 = Before Read SOD Callback was aborted. SSDO abort code : 0
112403 = Before Write SOD Callback was aborted SSDO abort code : 0
112404 = After Write SOD Callback was aborted SSDO abort code : 0
112405 = Instance number is invalid SSDO abort code : 0
112406 = Actual length of the SOD entry can not be set by the application SSDO abort code : 0
112407 = Actual length to be set is larger than the maximum length of the object SSDO abort code : 0
112408 = Actual length is tried to set for an object with standard data type. Actual length can be set only for the objects with data type DOMAIN, OCTET STRING or VISIBLE STRING SSDO abort code : 0
112409 = Instance number is invalid. SSDO abort code : 0
112410 = Pointer to the actual length is NULL. SSDO abort code : 0
112411 = Actual length of the SOD entry can not be get by the application. SSDO abort code : 0
112412 = Reference to the object dictionary is NULL.
112413 = Object dictionary is empty at the instance (0).
112414 = Instance number is invalid. SSDO abort code : 0
112415 = Pointer to the object handle is NULL. SSDO abort code : 0
112416 = Pointer to the application object is NULL. SSDO abort code : 0
112417 = The SAPL_SOD_AttrGetClbk() application callback function has signaled error. SSDO abort code : 0
112418 = The SOD object was not found. SSDO abort code : 0
112419 = Instance number is invalid. SSDO abort code : 0
112420 = Pointer to the object handle is NULL. SSDO abort code : 0
112421 = Object handle address does not point to a SOD object. SSDO abort code : 0
112422 = Instance number is invalid. SSDO abort code : 0
112423 = Access to the SOD object is locked. SSDO abort code : 0
112424 = Application object is not able to be locked. SSDO abort code : 0
112425 = Instance number is invalid. SSDO abort code : 0
112426 = SOD_Unlock() was called without SOD_Lock(). SSDO abort code : 0
112427 = Application object is not able to be unlocked. SSDO abort code : 0
112428 = Instance number is invalid. SSDO abort code : 0
112429 = SOD_EnableSodWrite() was called without SOD_DisableSodWrite(). SSDO abort code : 0
112430 = Instance number is invalid. SSDO abort code : 0
112431 = SOD write access is already disabled. SSDO abort code : 0
112432 = The SAPL_SOD_DefaultValueSetClbk() application callback function has signaled error.
112433 = Range checking is not supported for the object with SOD index (0) sub-index (0).
112434 = SOD object: data pointer undefined
112435 = No pointer to pointer to object data has been defined for the object with SOD index (0) sub-index (0).
112436 = The object with SOD index (0) sub-index (0) is not sorted by SOD index.
112437 = The object with SOD index (0) sub-index (0) is not sorted by SOD sub-index.
112438 = The attribute of the object with SOD index (0) sub-index (0) is invalid.
112439 = No access flag (RO_CONST,RO,WO) in the attribute of the object with SOD index (0) sub-index (0) is set.
112440 = Access flags (RO_CONST,RO,WO) in the attribute of the object with SOD index (0) sub-index (0) is set.
112441 = No default value has been given for the object with SOD index (0) sub-index (0).
112442 = Flag to call a callback function is set in the attribute of the object with SOD index (0) sub-index (0) but no callback function pointer is given.
112443 = Callback function pointer is given for the object with SOD index (0) sub-index (0) but no flag to call a callback function is set in the attribute entry.
112444 = The given range for the object with SOD index (0) sub-index (0) is wrong, because the maximum value is smaller the minimum value.
112445 = Data type is (UINT8 or INT8 or BOOLEAN) of the object with SOD index (0) sub-index (0) but the data length is not 1.
112446 = Data type is (UINT16 or INT16) of the object with SOD index (0) sub-index (0) but the data length is not 2.
112447 = Data type is (UINT32 or INT32 or REAL32) of the object with SOD index (0) sub-index (0) but the data length is not 4.
112448 = Data type is (DOMAIN or VISIBLE/OCTET STRING) of the object with SOD index (0) sub-index (0) but the maximum data length is 0.
112449 = Data type is (UINT64 or INT64 or REAL64) of the object with SOD index (0) sub-index (0) but the data length is not 8.
112450 = Data type of the object with SOD index (0) sub-index (0) is not supported .
112641 = (0) instance number is invalid.
112642 = (0) instance number is invalid.
112643 = Pointer to the number of free frames counter is NULL.
112644 = (0) instance number is invalid.
112645 = Pointer to the received frame is NULL.
112646 = The received safety domain number (0) is unknown.
112647 = The received frame identifier (0) is invalid.
112648 = The length of the received frame (0) is invalid.
112649 = Instance number (000) is invalid.
112650 = Tx SPDO (0) is invalid.
112651 = There is a gap before the Tx SPDO with SOD index (0).
112652 = No Tx SPDO communication parameter is defined with SOD index (0) sub-index (0) for the Tx SPDO mapping parameter with SOD index (0) sub-index (0).
112653 = No mandatory Tx SPDO is defined.
112654 = Too many Tx SPDOs are defined.
112655 = Before write flag is not set in the Tx SPDO attribute with SOD index (0) sub-index (0).
112656 = There is a gap before the Rx SPDO with SOD index (0).
112657 = No Rx SPDO communication parameter is defined with SOD index (0) sub-index (0) for the Tx SPDO mapping parameter with SOD index (0) sub-index (0).
112658 = Too many Rx SPDOs are defined.
112659 = Before write flag is not set in the Rx SPDO attribute with SOD index (0) sub-index (0).
112660 = Target Address is already used or invalid. Tx SPDO number (0x1).
112661 = Tx SPDO with SPDO number (1) is used only for sending SPDO Time Request and not for sending SPDO Time Response.
112662 = Sending request type (k_SENDING_FREE) is invalid.
112663 = Sending request type (0) is invalid.
112664 = Pointer to the counter of the free frames is NULL.
112665 = Before read attribute must not be set for the object with SOD index (0) sub-index (0).
112666 = Tx SPDO object with SOD index (0) sub-index (0) is not supported.
112667 = Source Address is already used or invalid. Rx SPDO number (0x1).
112668 = SPDO Time Response was received without sending a SPDO Time Request (late SPDO time response) on the Rx SPDO with SPDO number (1).
112669 = Number of not answered TR expired at the Rx SPDO with SPDO number (1)
112670 = SPDO Time Request Cycle time is expired for the Rx SPDO with SPDO number (1) in the k_STATE_WF_TRES state.
112671 = SPDO Time Request Cycle time is expired for the Rx SPDO with SPDO number (1) in the k_STATE_WF_NEXT_TREQ_BLOCK state.
112672 = Late SPDO Time Response was received on the Rx SPDO with SPDO number (1)
112673 = The time synchronization consumer state machine of the Rx SPDO with SPDO number (1) is in unknown state
112674 = SCT timer is expired for the Rx SPDO with SPDO number (1)
112675 = The SPDO propagation delay (0) received on the Rx SPDO with SPDO number (1) is too short.
112676 = The SPDO propagation delay (0) received on the Rx SPDO with SPDO number (1) is too long.
112677 = Before read attribute must not be set for the object with SOD index (0) sub-index (0).
112678 = Rx SPDO object with SOD index (0) sub-index (0) is not supported.
112679 = SPDO time synchronization propagation delay (0) is too short.
112680 = SPDO time synchronization propagation delay (0) is too long.
112681 = TR (0) in the SPDO Time Response received on the Rx SPDO number (1) is invalid.
112682 = Before write flag is not set for the Tx SPDO object with SOD index (0) sub-index (0).
112683 = Too many Tx SPDO mapping entries are defined for the Tx SPDO with SOD index (0) sub-index (0).
112684 = SOD object is not mappable for the Tx SPDO. SSDO abort code (0).
112685 = Before write flag is not set for the Rx SPDO object with SOD index (0) sub-index (0).
112686 = Too many Rx SPDO mapping entries are defined for the Rx SPDO with number (0x1) sub-index (0).
112687 = SOD object is not mappable for the Rx SPDO. SSDO abort code (0).
112688 = Rx SPDO received with wrong payload size (0) for the Rx SPDO with SPDO number (1).
112689 = Payload size is too large for the Tx SPDO with SPDO number (1).
112690 = SOD mapping entry at SOD sub-index (0) for the Tx SPDO with SPDO number (1) is not mappable because of a SOD error.
112691 = Number of the mapped entries is too large for the Tx SPDO with SPDO number (1).
112692 = Payload size is too large for the Rx SPDO with SPDO number (1).
112693 = SOD mapping entry at SOD sub-index (0) for the Rx SPDO with SPDO number (1) is not mappable because of a SOD error.
112694 = Number of the mapped entries is too large for the Rx SPDO with SPDO number (1).
112695 = SOD service (0) is ignored.
112696 = SOD service (0) is ignored.
112697 = Tx SPDO (0) is not configured.
112698 = Tx SPDO (0) is not defined in the SOD.
112699 = Tx SPDO (0) is invalid.
112700 = The RxSPDO cannot get connected to its TxSPDO
112701 = Invalid instance number.
112702 = Invalid RxSPDO number
112703 = Zero pointer.
112897 = The delivered instance (00) is bigger than <EPLS_cfg_MAX_INSTANCES>!
112898 = Pointer to number of free management frames refers to NULL!
112899 = Telegram type (00) of received EPLS frame is not defined!
112900 = No SCM present, not able to process SSDO Service Request with ID (00)!
112901 = No SCM present, not able to process SNMT Service Request with ID (00)!
112902 = Stack called without EPLS frame to process!
112903 = The length of the received frame (0) is invalid.
112904 = New EPLS frame cannot be processed, Stack is busy!
112905 = The SSC FSM switched into an undefined state (00)!
112906 = The delivered instance (00) is bigger than <EPLS_cfg_MAX_INSTANCES>!
113153 = NULL pointer passed instead of reference to <request struct of transfer data>.
113154 = Function call with invalid target address (SADR) of SSDO Service Request (0000).
113155 = NULL pointer passed instead of reference to <data to be written into a SOD>.
113156 = Function call with invalid maximum payload data length (00).
113157 = NULL pointer passed instead of reference to <Response callback function>.
113158 = NULL pointer passed instead of reference to <request struct of transfer data>.
113159 = Function call with invalid target address (SADR) of SSDO Service Request (0000).
113160 = Reference to the response buffer is NULL.
113161 = Function call with invalid maximum payload data length (00).
113162 = NULL pointer passed instead of reference to <Response callback function>.
113163 = Length of the response buffer size (0000) is invalid.
113164 = The b_payloadLen is smaller then 12 byte and the UINT64, INT64 and REAL64 data type must not be segmented.
113165 = Function call with invalid data type of SSDO Service Request (00).
113166 = The received SSDO Service Response with ID 00 could NOT be assigned.
113167 = The protocol FSM was called in the k_ST_WF_REQ_TRANS state
113168 = The data length (00) of the expedited init upload response frame is invalid. Frame is ignored.
113169 = The object size (00) in the init segmented upload response frame is invalid. Frame is ignored.
113170 = The data length (00) of the init segmented upload response frame is invalid. Frame is ignored.
113171 = The data length (00) of the middle segmented upload response frame is invalid. Frame is ignored.
113172 = The data length (00) of the end segmented upload response frame is invalid. Frame is ignored.
113173 = Upload end segment response (k_UPLD_SEG_END) received in the state 'wait for middle segment' (k_ST_WF_UPLD_RESP_MID_SEG).
113174 = The rest raw data length (00) in the end segmented upload response is wrong. Frame is ignored.
113175 = The data length (00) of the end segmented upload response frame is invalid. Frame is ignored.
113176 = The data length (00) of the expedited download response frame is invalid. Frame is ignored.
113177 = The data length (00) of the init segmented download response frame is invalid. Frame is ignored.
113178 = The data length (00) of the middle segmented download response frame is invalid. Frame is ignored.
113179 = The data length (00) of the end segmented download response frame is invalid. Frame is ignored.
113180 = Undefined Protocol FSM state (00).
113181 = NO Protocol FSM is available, actually.
113182 = SSDO Service Response with invalid toggle bit in SOD Access Command (SACmd) received.
113183 = SSDO Service Response with invalid object index received.
113184 = SSDO Service Response with invalid object sub index received.
113185 = The data length (00) of the response frame is invalid (< k_DATA_HDR_LEN). Frame is ignored.
113186 = The data length (00) of the abort response frame is invalid. Frame is ignored.
113187 = SSDO Service Response with invalid SOD Access Command (SACmd) received.
113188 = The rest raw data length (00) in the end segmented upload response is wrong. Frame is ignored.
113189 = Undefined FSM event (00) in Service FSM call.
113190 = Undefined FSM event (00) in Service FSM call.
113191 = SSDO transfer is already running with the SN (source address = 00).
113192 = The value in TR field (00) of the received SSDO frame is NOT zero.
113193 = SSDO Service Response with invalid SOD Access Request number (SANo) received (exp : 00 rec : 00).
113409 = The received SSDO Service was rejected by SSDOS filter - target address: 0 safety domain number: 0
113410 = The TR field (0) in the received SSDO Service is invalid.
113411 = Undefined FSM state (00) in FSM call.
113412 = Abort frame received from the SSDOC with abort code : (00).
113413 = The payload length (00) in the initiate upload request frame received from the SSDOC is wrong.
113414 = The payload length (00) in the abort frame received from the SSDOC is wrong.
113415 = Wrong SOD access command (00) received from the SSDOC.
113416 = The payload length (00) in the SSDO frame received from the SSDOC is wrong.
113417 = Invalid SOD access command (00) was set by the EPLS SW.
113418 = The payload length (00) in the SSDO frame received from the SSDOC is wrong.
113419 = Invalid SOD access command (00) was set by the EPLS SW.
113420 = The payload length (00) in the SSDO frame received from the SSDOC is wrong.
113421 = The payload length (00) in the SSDO frame received from the SSDOC is not equal to 4.
113422 = The addressed SOD entry is not matching to the number of payload bytes of the requested expedited transfer.
113423 = The maximum length of the addressed SOD entry is smaller than the length of the data to be written.
113424 = The addressed SOD entry is not matching to the number of payload bytes of the requested segmented transfer.
113425 = The SSDOC request payload length is too small.
113426 = Raw data length in the download middle segment is wrong
113427 = Raw data length in the download end segment is wrong
113428 = SOD_Write() was called to write a segment without locking the SOD
113429 = SSDO Service Request received with inconsistant index or sub index.
113430 = SSDO Service Request with invalid toggle bit received.
113431 = SSDO Service Request for download received, because the write access is disabled.
113432 = SSDO Service Request for download received, because the SOD is locked.
113433 = SSDO Service Request for download received, because the active instance is not in PRE_OPERATIONAL state.
113434 = SSDO Service Request for download received, because an other instance is in OPERATIONAL state.
114433 = internal cross communication error EPS
114434 = Checksum comparison buffer is full
114435 = Checksum send buffer is full
114436 = No checksum send buffer available
114437 = No checksum receive buffer available
114438 = Received crc buffer length is not equal to the sent crc buffer length
114439 = Received crc data is not equal to sent crc data
114440 = Wrong CTB got inserted into the SOD
114441 = Error during crc calculation
114442 = Invalid tx frame
114443 = Invalid instance should go to operational
114444 = Module initialization failed
114445 = SPDO tx telegram allocation failed
114446 = SSDO tx telegram allocation failed
114450 = Insufficient data length in parameter string
114451 = Invalid data type in parameter string
114452 = Invalid object in parameter string
114453 = Zero pointer in cyclic function
114454 = Zero pointer for CT in SOD
114455 = Zero pointer for parameters in SOD
114456 = Error loading parameter file
114459 = Error while loading the additional parameter file.
114460 = state change - pre operational to operational
114461 = state change - operational to pre operational
114493 = Invalid instance number.
114496 = SNfail received (uP2)
114497 = storing the SADR-DVI list did not work
114498 = zero ptr in SOD machine option callback
114499 = state change to operational
114500 = state change to pre-operational
114501 = same input field byte was mapped twice
114502 = same output field byte was mapped twice
114503 = invalid mapping entry
114504 = SPDO tx queue is full
114505 = Invalid instance should calculate the CRC
114506 = No program flow counter send buffer available
114507 = No CRC calc done bits send buffer available
114508 = Ptr to crc shadow buffer is wrong
114528 = counter of invalid safety frames has increased (uP2)
114529 = counter for SPDO errors has increased (uP2)
114530 = Connection statistic counter has changed.
114531 = Error when initializing the external machine options. (uP2)
114532 = Input area of machine options already reserved. (uP2)
114533 = external machine options data available but not needed (uP2)
114534 = external machine options missing (uP2)
114535 = status error external machine options (uP2)
114536 = Error concerning the SafeModuleOk channels
114688 = function called in wrong state of the state machine
114689 = undefined value for selection switch, info: invalid value
114690 = number of UDID mismatches becomes negative, info: SADR
114691 = number of erroneous modules becomes negative, info: SADR
114692 = EPLS stack posted an invalid state of a module, info: state, sadr
114693 = interface function to EPLS was not called from timer task, info: 0
114694 = wrong internal module state for detection of encoder mismatch. info2: module flags, info1: saddr
114695 = wrong internal module state for detection of encoder mismatch
114696 = signaling equivalent states at the same time
114697 = SOD read access returned a NULL pointer, info: object index, sub-index
114698 = SOD attribute access returned invalid information, info: object index, sub-index
114699 = SOD read access returned an invalid saddr, info: object index, sub-index
114700 = EPLS posts invalid information for a module state, info2: saddr
114701 = error UDID ack
114702 = invalid state of cross communication
114703 = error at reading confirmed revision number
114704 = 2 Revisions for 1 SAddr, info: saddr, revision
114705 = internal error UDID-ACK
114706 = error external configuration file
114707 = error external UDIDs (flag)
114708 = error auto confirmation (SN)
114709 = error external UDID (Parameter)
114710 = error SOD write
114711 = error external machine options
114712 = external machine options discrepancy
114713 = error external startup flags
114714 = error remote control
114715 = error in SOD entry for BIT machine options
114716 = zero pointer in function call UDID-read
114717 = interface to get module flags was called with wrong saddr
114718 = Error technology guarding
114719 = Error loading the extended external machine options
114720 = error initializing SMC
114721 = Motion function error
114722 = Error loading or linking a libraryfile
114723 = Error of a User CFunction Library
114724 = Error of a firmware CFunction
114725 = Table function error
114726 = Error loading the external tables
114727 = NULL Pointer check failed
114816 = confirmation of a single module mismatch
114817 = confirmation of 2 module mismatches
114818 = confirmation of 3 module mismatches
114819 = confirmation of 4 module mismatches
114820 = confirmation of >4 module mismatches
114821 = confirmation of a new firmware version
114822 = Revision file is incompatible
114823 = safe key file is incompatible
114824 = info auto confirmation file
114825 = safety module missing or nodeguarding failed
114826 = Module is not started due to firmware revision mismatch
114827 = info user action
114828 = info SD communication
114829 = error FW version, vendor or module type
114830 = safety module parameter error
114831 = additional information technology guarding
114832 = Initializing the motion functions failed
114833 = internal error revision number
114834 = internal SLX command channel failed
114835 = SLX in inaccessible state
114848 = Warning of an User CFunction Library
114849 = Warning of a firmware CFunction
114943 = internal product test message
114962 = internal error: FBK input is 0 (µP1)
114976 = max. frequency exceeded
114979 = internal error exchange data FBK (µP1)
114980 = internal error exchange data results (µP1)
114981 = internal error exchange data testpulse values (µP1)
114982 = execution difference uP1/uP2 (uP2 in failsafe?)
114994 = 2-channel evaluation: discrepancy time elapsed
115009 = input error state has changed (uP1)
115010 = internal hardware error at input channel (uP1)
115011 = input error state has changed
115106 = internal error MFW_PreOp (µP1)
115107 = EPS parameter struct (uP1)
115108 = internal error: invalid cycle time (µP1)
115109 = parameter error: PLCopen-FBK mode (datapoint usage!) (µP1)
115110 = parameter error: periode of parametric testpulses (µP1)
115111 = parameter error: lowtime of parametric testpulses (µP1)
115112 = parameter error: input filter time (uP1)
115113 = parameter error: discrepancy time (µP1)
115114 = internal error: checkpoints PreOp (µP1)
115115 = internal error: MFW_Init not finished successfully (µP1)
115116 = parameter error: pulse mode (µP1)
115117 = parameter error: pulse source (µP1)
115118 = two-channel evaluation not activated
115119 = parameter error: doorlock FUB (µP1)
115216 = Parameter error in MFW_Cycle_f1()
115217 = Parameter error MFW_Cycle_f2()
115218 = internal error Xchange data FBK states (µP1)
115219 = Error XchangeData: different gate signals
115220 = Error XchangeData: different feedback signals
115221 = execution difference uP1/uP2 (uP2 in failsafe?)
115222 = Parameter error in MFW_Cycle_f3()
115223 = internal error (default step) in MFW_OutControl()
115224 = Error in function MFW_Cycle_f4()
115225 = internal error: Wrong checkpoint counter value
115232 = output channel test errors cleared (uP1)
115234 = Output teststate has changed
115235 = inconsistent output data
115236 = Output teststate has changed
115237 = overcurrent error
115238 = Error XchangeData: different feedback signals (µP1)
115239 = internal error feedback high (µP1)
115240 = wrong switching sequence of SafeCtrl and Release
115362 = internal error MFW_PreOp (µP1)
115363 = EPS parameter struct (uP1)
115364 = internal error: invalid cycle time (µP1)
115370 = internal error: checkpoints PreOp (µP1)
115372 = output stuck at high detected at PreOp state
115373 = internal error feedback high during PreOp (µP1)
115374 = internal error feedback high during PreOp (µP1)
115458 = internal parameter error (uP1)
115459 = internal parameter error (uP1)
115472 = internal error during hardwaretest (uP1)
115473 = internal error not used channel is set (uP1)
115474 = internal error (default step) in MFW_OutControl() (uP1)
115475 = internal error crosscommunication (uP1)
115476 = internal error at feedback evaluation (uP1)
115477 = max. switching frequency exceeded (uP1)
115478 = internal error voltage measurement out of range (µP1)
115479 = internal parameter error (uP1)
115480 = Backfeed voltage at the output (uP1)
115488 = max. switching frequency exceeded (uP1)
115489 = channel output state has changed (µP1)
115490 = wrong switching sequence of SafeCtrl and Release
115619 = Internal error in function MFW_PreOp (uP1)
115620 = internal error Feedbacks not 0 at startup (uP1)
115621 = internal error in EPS parameter struct (uP1)
115622 = internal error: invalid cycle time (µP1)
115712 = SMC Fail Safe: Internal error, Program flow
115713 = SMC Fail Safe: Internal error, NULL pointer access
115714 = SMC Fail Safe: Internal error, SPI transfer
115715 = SMC Fail Safe: Internal error, MFW NVM data memory
115716 = SMC Fail Safe: Internal error, Communication EnDat Master
115717 = SMC Fail Safe: Internal error, Communication ACOPOS
115718 = SMC Fail Safe: Internal error, Communication Encoder
115719 = SMC Fail Safe: Module/compensation data is incompatible!
115720 = SMC Fail Safe: CRC of the module/compensation data is not correct!
115721 = SMC Fail Safe: SOS and STO not connected but needed for RSP
115728 = SMC Fail Safe: Internal error, Cross communication of checkpoints
115729 = SMC Fail Safe: Internal error, Cross communication of status word
115730 = SMC Fail Safe: Internal error, Cross communication of output state
115731 = SMC Fail Safe: Internal error, Cross communication of EnDat position
115732 = SMC Fail Safe: Internal error, Cross communication of EnDat error register
115733 = SMC Fail Safe: Internal error, Cross communication of Encoder state machine
115734 = SMC Fail Safe: Internal error, Cross communication of EnDat state machine
115735 = SMC Fail Safe: Internal error, Cross communication of EnDat state machine
115736 = SMC Fail Safe: Encoder configuration - Units per number of revolution invalid
115737 = SMC Fail Safe: Encoder configuration - Normalized maximal speed invalid
115738 = SMC Fail Safe: Encoder configuration - Encoder resolution too low
115739 = SMC Fail Safe: Encoder configuration - Encoder resolution too high
115740 = SMC Fail Safe: Encoder configuration - Units resolution too high
115741 = SMC Fail Safe: Encoder configuration - One unit is shorter than one nm
115742 = SMC Fail Safe: Encoder mismatch - Configuration data changed several times
115743 = SMC Fail Safe: Encoder mismatch - Configuration data changed
115744 = SMC Fail Safe: Wrong parameterization
115745 = SMC Fail Safe: Module cycle time is not valid
115746 = SMC Fail Safe: Parameterization - Deceleration ramp is too steep
115747 = SMC Fail Safe: Internal state machine is in Fail Safe State
115748 = SMC Fail Safe: Deactivated safety function was requested
115749 = SMC Fail Safe: SMS - Speed limit is out of range
115750 = SMC Fail Safe: SLS1 - Speed limit is out of range
115751 = SMC Fail Safe: SLS2 - Speed limit is out of range
115752 = SMC Fail Safe: SLS3 - Speed limit is out of range
115753 = SMC Fail Safe: SLS4 - Speed limit is out of range
115754 = SMC Fail Safe: Standstill speed limit is out of range
115755 = SMC Fail Safe: SLS1 - Speed limit violates the configuration instruction
115756 = SMC Fail Safe: SLS2 - Speed limit violates the configuration instruction
115757 = SMC Fail Safe: SLS3 - Speed limit violates the configuration instruction
115758 = SMC Fail Safe: SLS4 - Speed limit violates the configuration instruction
115759 = SMC Fail Safe: Standstill Speed limit violates the configuration instruction
115760 = SMC Fail Safe: Violation of parameter limits
115761 = SMC Fail Safe: SMP is used but Homing was not configured
115762 = SMC Fail Safe: SMP - Lower position limit is greater or equal than upper limit
115763 = SMC Fail Safe: SLP is used but Homing was not configured
115764 = SMC Fail Safe: SLP - Lower position limit is greater or equal than upper limit
115765 = SMC Fail Safe: SLP - Position window outside SMP position window
115766 = SMC Fail Safe: SMP - Tolerance is greater than SMP position window
115767 = SMC Fail Safe: SLP - Tolerance is greater than SLP position window
115768 = SMC Fail Safe: Value of Deceleration ramp is out of range
115780 = SMC Fail Safe: Homing - Max. trigger speed is out of range
115781 = SMC Fail Safe: Homing - Ref Switch: No reference switch connected
115782 = SMC Fail Safe: Homing - Home Offset: No absolute encoder connected
115783 = SMC Fail Safe: Homing - Home Offset with Correction: SMP not configured
115784 = SMC Fail Safe: Homing - SMP window is greater than safe absolute encoder range
115785 = SMC Fail Safe: Homing - SLP window is greater than safe absolute encoder range
115786 = SMC Fail Safe: Homing - Encoder doesn't support a safe reference pulse
115787 = SMC Fail Safe: Homing - Speed tolerance is out of range
115788 = SMC Fail Safe: Homing - reference pulse : Max. trigger speed is too big
115789 = SMC Fail Safe: Homing - Function is requested but not configured
115790 = SMC Fail Safe: Homing - RefSwitch bit is set but not configured
115791 = SMC Fail Safe: Homing - Position is out of SMP window
115792 = SMC Fail Safe: Homing - Direct with reference pulse: Not supported
115793 = SMC Fail Safe: Internal error, Cross communication of output signals
115794 = SMC Fail Safe: Internal error, Cross communication of output state machine
115796 = SMC Fail Safe: Program error in PreOperational state
115797 = SMC Fail Safe: Safe output - Stuck at high detected
115798 = SMC Fail Safe: Safe output - Test state has changed
115799 = SMC Fail Safe: Encoder - Speed limit exceeded
115800 = SMC Fail Safe: Encoder - Acceleration limit exceeded
115801 = -
115802 = -
115803 = SMC Fail Safe: Encoder mismatch detected
115804 = SMC Fail Safe: Internal error, Lockbit set
115805 = SMC Fail Safe: Velocity error tolerance too large
115806 = SMC Fail Safe: Lag error tolerance too large
115807 = SMC Fail Safe: Encoder - Configuration error
115808 = SMC Fail Safe: Homing - Configuration error
115809 = SMC Fail Safe: Internal error, Invalid current sensor resolution
115810 = SMC Fail Safe: Internal error, Invalid current sensor measurement range
115811 = SMC Fail Safe: Internal error, Current values sum not plausible
115812 = SMC Fail Safe: Internal error, Cross communication of stator current vector
115813 = SMC Fail Safe: Internal error, Cross communication of current vector angle
115814 = SMC Fail Safe: Internal error, Cross communication of the status register IPWM
115815 = SMC Fail Safe: Internal error, Cross communication FPGACom state machine
115816 = SMC Fail Safe: Internal error, FPGA communication
115817 = SMC Fail Safe: Internal error, FPGA SinCos - Reference voltage Channel A
115818 = SMC Fail Safe: Internal error, FPGA SinCos - Reference voltage Channel B
115819 = SMC Fail Safe: Internal error, FPGA SinCos - Configuration
115820 = SMC Fail Safe: Internal error, Hardware tests - Voltage monitoring
115821 = SMC Fail Safe: Internal error, ADC compensation data - Flash validation
115822 = SMC Fail Safe: Internal error, FPGA current measurement - ADC processing
115823 = SMC Fail Safe: Internal error, FPGA current measurement - Reference monitoring
115824 = SMC Fail Safe: Internal error, FPGA current measurement - Efficiency test
115825 = SMC Fail Safe: Internal error, FPGA current measurement - Configuration
115826 = SMC Fail Safe: Internal error, FPGA SinCos - Efficiency test
115827 = SMC Fail Safe: SBT Parameterization - Current threshold too high
115828 = SMC Fail Safe: SBT Parameterization - External load greater than threshold
115829 = SMC Fail Safe: SBT Parameterization - External load too small
115831 = SMC Fail Safe: SBT Parameterization - External load too high
115832 = SMC FS: Homing - S_SwitchHomingMode is set but not connected
115833 = SMC FS: Homing - S_SwitchHomingMode is connected but ReqHoming not
115834 = SMC FS: Homing - S_SwitchHomingMode connection and configuration not conform
115835 = SMC Fail Safe: Internal error, Cross communication of RSP receive data frame
115836 = SMC Fail Safe: Internal error, Cross communication of RSP send data frame
115837 = SMC Fail Safe: RSP - Save operation failed
115838 = SMC Fail Safe: RSP - Homing, SOS position tolerance too big
115863 = SMC Fail Safe: Additional safety parameters: Placeholder enable bit is set
115864 = SMC Fail Safe: Additional safety parameters: Invalid payload size
115865 = SMC: Interner error, CUnit test
115866 = SMC Fail Safe: Additional safety parameters: Invalid structure size
115867 = SMC Fail Safe: Received data for additional safety parameters too big
115868 = SMC Fail Safe: CRC chekc of the additional safety parameters failed
115873 = SMC Fail Safe: Incompatible parameter structure
115874 = SMC Fail Safe: Incompatible axis type
115875 = SMC Fail Safe: Error in PreOperational function
115876 = SMC Fail Safe: Cross communication SinCos status during FPGA boot phase
115877 = SMC Fail Safe: Encoder not configured but needed for safety functions
115878 = SMC Fail Safe: Squared vector length too large
115879 = SMC Fail Safe: Cross communication vector control trigger counter
115880 = SMC Fail Safe: Value of SinCos status register not plausible
115881 = SMC Fail Safe: Internal error, Vector length is not equal to 1Vpp after reset
115882 = SMC Fail Safe: SBT Current threshold too small
115883 = SMC Fail Safe: Internal error while processing the additional paramters
115884 = SMC Fail Safe: Homing - RefSwitch is connected but ReqHoming not
115885 = SMC Fail Safe: Additional safety parameters: Invalid axis type ID
115886 = SMC Fail Safe: Additional safety parameters: Invalid structure version
115887 = SMC: Safely Limited Acceleration - Violation of the acceleration monitoring
115888 = SMC: Safe Brake Test - SBT: Timeout
115889 = SMC: Safe Brake Test - SBT: SBC is active
115890 = SMC: Safe Brake Test - Illegal sector change
115891 = SMC: additional parameters - Error during download
115892 = SMC FFS: RSP - Homing, stored position invalid
115893 = SMC: Safe Brake Test - Rho has left the actual sector too erly
115894 = SMC: Safe Brake Test - Measured and parametrized external load differ
115895 = SMC: Safe Brake Test - Current fell below parametrized test current threshold
115896 = SMC Functional Fail Safe: Drift of raw positions between õP1 and õP2 to big
115897 = SMC Functional Fail Safe: internal error
115898 = SMC Functional Fail Safe: Encoder not ready
115899 = SMC: Safe Brake Test - Test current direction not correct
115900 = SMC: Safe Brake Test - Parametrized test current threshold not reached
115901 = SMC: Safe Brake Test - Violation of the position tolerance
115902 = SMC Functional Fail Safe: Encoder error SinCos processing
115903 = SMC: Safe Brake Test - Test interval elapsed, test required
115904 = SMC: Current sum exeeded tolerance range
115905 = SMC: Current sensor range exceeded phase U
115906 = SMC: Current sensor range exceeded phase V
115907 = SMC: Current sensor range exceeded phase W
115908 = SMC: Compensation data incomplete
115909 = SMC Functional Fail Safe: SS2, SOS Violation of standstill position tolerance
115910 = SMC Functional Fail Safe: Encoder error was detected
115911 = SMC Functional Fail Safe: SDI - Violations of the safe direction
115912 = SMC Functional Fail Safe: SDI - Violation of the positive direction
115913 = SMC Functional Fail Safe: SDI - Violation of the negative direction
115914 = SMC Functional Fail Safe: SLI - Violation of standstill speed limit
115915 = SMC Functional Fail Safe: SLI - Violation of position window (increments)
115916 = SMC Functional Fail Safe: Violation of the actual speed limit
115917 = SMC Functional Fail Safe: Violation of the deceleration ramp
115918 = SMC Functional Fail Safe: SMS - Violation of the speed limit
115919 = SMC Functional Fail Safe: SOS - Violation of the speed limit
115920 = SMC Functional Fail Safe: SS2 - Violation of the speed limit
115921 = SMC Functional Fail Safe: SLS1 - Violation of the speed limit
115922 = SMC Functional Fail Safe: SLS2 - Violation of the speed limit
115923 = SMC Functional Fail Safe: SLS3 - Violation of the speed limit
115924 = SMC Functional Fail Safe: SLS4 - Violation of the speed limit
115925 = SMC Functional Fail Safe: Alive test of set position was not executed
115926 = SMC Functional Fail Safe: Warning on output was not acknowledged
115927 = SMC Functional Fail Safe: Alive test - Monitoring timeout
115928 = SMC Functional Fail Safe: SMP - Homing timeout exceeded
115929 = SMC Functional Fail Safe: SMP - Violation of the deceleration ramp
115930 = SMC Functional Fail Safe: SLP - Violation of the deceleration ramp
115931 = SMC Functional Fail Safe: SMP - Violation of lower SMP limit
115932 = SMC Functional Fail Safe: SMP - Violation of upper SMP limit
115933 = SMC Functional Fail Safe: SLP - Violation of lower SLP limit
115934 = SMC Functional Fail Safe: SLP - Violation of upper SLP limit
115935 = SMC Functional Fail Safe: SMP - Movement in neg. direction outside SMP limit
115936 = SMC Functional Fail Safe: SMP - Movement in pos. direction outside SMP limit
115937 = SMC Functional Fail Safe: SLP requested, axis is not homed yet
115938 = SMC Functional Fail Safe: SMP, SLP - Internal error
115939 = SMC Functional Fail Safe: SMP, SLP - INT32 overflow of S_SafePosition
115940 = SMC Functional Fail Safe: Homing - Timeout elapsed
115941 = SMC Functional Fail Safe: Homing - Standstill Speed tolerance violated
115942 = SMC Functional Fail Safe: Homing reference pulse - Max. trigger speed exceeded
115943 = SMC Functional Fail Safe: Homing - Movement invalid
115944 = SMC Functional Fail Safe: Homing offset - Position outside INT32 range
115945 = SMC Functional Fail Safe: Homing offset - Violation of safe encoder range
115946 = SMC: Encoder mismatch - Length of encoder configuration data changed
115947 = SMC: Encoder mismatch - Serial number of encoder changed
115948 = SMC: Encoder mismatch - Version changed or no encoder data stored
115949 = SMC: Encoder mismatch - EnDat master data or encoder data changed
115950 = SMC: Encoder - EnDat Master state error register is set
115951 = SMC Functional Fail Safe: Homing failed
115952 = SMC Functional Fail Safe: Violation of safety function
115953 = SMC Functional Fail Safe: Function block switched back into IDLE state
115954 = Channel test errors cleared. (uP1)
115955 = SMC Functional Fail Safe: Safe output - Teststate has changed
115956 = SMC: Encoder - Received position not valid
115957 = SMC: Encoder mismatch detected
115958 = SMC: Encoder - Initialization error
115959 = SMC: Encoder - Debug information
115960 = SMC: Internal warning, Lockbit set
115961 = SMC: Encoder - SafeSpeed exceeded INT16 range
115962 = SMC: Encoder - EnDat Master encoder error register is set
115963 = SMC: Velocity error limit exceeded
115964 = SMC: Position lag error limit exceeded
115965 = SMC: Encoder - Rounding error due to parametrization
115966 = SMC: Encoder - Length of physical reference system too large
115967 = SMC Fail Safe: Encoder - Acceleration limit exceeded
115969 = internal parameter error (uP1)
115970 = internal parameter error (uP1)
115984 = internal hardware error (driver) (uP1)
115985 = inconsistent output data (uP1)
115987 = internal X-com error (uP2 in failsafe?)
115988 = internal error test pattern (uP1)
115989 = max. switching frequency exceeded (uP1)
116000 = relay stuck at low (uP1)
116001 = relay stuck at high (uP1)
116131 = EPS parameter struct (uP1)
116132 = internal hardware error (init) (uP1)
116133 = EPS parameter struct (uP1)
116134 = internal error: invalid cycle time (µP1)
116212 = Error in Crosscommunikation
116213 = Reference-input doesn't match actual input state
116226 = internal error (µP1)
116227 = internal error (µP1)
116228 = internal error (µP1)
116229 = error in voltagemonitoring (µP1)
116243 = internal error exchange data (µP1)
116244 = internal error during hardwaretests (µP1)
116245 = internal error (µP1)
116248 = conversiontime of AD-converter to big (µP1)
116249 = state of channel error evaluation has changed
116256 = internal error testingtime exceeded (µP1)
116257 = state of two-channel evaluation has changed
116258 = state of threshold evaluation has changed
116259 = internal error PreOpStep to long (µP1)
116260 = internal error modul not calibrated (µP1)
116261 = internal error incorrect CRC of calibration data (µP1)
116262 = output current for sensor feed exceeded (µP1)
116263 = No sensor connected
116264 = error during shunttest (µP1)
116387 = internal error MFW_PreOp (µP1)
116388 = -
116389 = EPS parameter struct (uP1)
116390 = internal error: invalid cycle time (µP1)
116391 = wrong sensortyp
116392 = thresholdparamter out of range
116393 = internal error MFW_PreOp (µP1)
116480 = Warning message from customized library
116481 = Error message from customized library.
116482 = Error message from RoboticCtrl_SF library
116483 = Warning message from RoboticCtrl_SF library
116484 = Error message from RoboticCtrl_SF library
116485 = Warning message from RoboticCtrl_SF library
116486 = Error message from RoboticCtrl_SF library
116487 = Warning message from RoboticCtrl_SF library
116488 = Error message from RoboticCtrl_SF library
116489 = Warning message from RoboticCtrl_SF library
116490 = Error message from RoboticCtrl_SF library
116491 = Warning message from RoboticCtrl_SF library
116492 = Error Utilities library: out of range
116493 = Library function is not supported on the specific SL
116494 = Error message from RoboticCtrl_SF_2 library
116495 = Warning message from RoboticCtrl_SF_2 library
116496 = Error message from RoboticCtrl_SF_2 library
116497 = Warning message from RoboticCtrl_SF_2 library
116498 = Error message from RoboticCtrl_SF_2 library
116499 = Warning message from RoboticCtrl_SF_2 library
116500 = Error message from RoboticCtrl_SF_2 library
116501 = Warning message from RoboticCtrl_SF_2 library
116502 = Error message from RoboticCtrl_SF_2 library
116503 = Warning message from RoboticCtrl_SF_2 library
116504 = Error message from RoboticCtrl_SF_2 library
116505 = Warning message from RoboticCtrl_SF_2 library
116506 = Error message from RoboticCtrl_SF_2 library
116507 = Warning message from RoboticCtrl_SF_2 library
116508 = Error message from RoboticCtrl_SF_2 library
116509 = Warning message from RoboticCtrl_SF_2 library
116510 = Error message from RoboticCtrl_SF_2 library
116511 = Warning message from RoboticCtrl_SF_2 library
116512 = Error message from RoboticCtrl_SF_2 library
116513 = Warning message from RoboticCtrl_SF_2 library
116514 = Error message from RoboticCtrl_SF_2 library
116515 = Warning message from RoboticCtrl_SF_2 library
116516 = Undefined state in C function code detected
116517 = Nullpointer in a Library C function detected
116518 = FParameters Build info
116519 = FParameters configuration info
116520 = Get FOutput Data info
116521 = Send FInput Telegram info
116528 = Run psd Data exchange info
116529 = Stop psd Data exchange info
116533 = System path invalid back value
116534 = PNIO-Stack communication info
116535 = FUB initializing info
116536 = read FParameters from GPDO
116537 = PSD Initializing invalid back value
116544 = PSD FParameters back values not valid
116545 = PSD FOutTelegram/Data back value not valid
116546 = PSD FInData/Telegram back value not valid
116547 = PSD run back value not valid
116548 = PSD stop back value not valid
116984 = SMC FFS: RSP - Homing, INT32 overflow of S_SafePosition
116986 = SMC FFS: RSP - Homing, Positional change during power off too big
116987 = SMC FFS: RSP - Homing, Config changed
116989 = SMC FFS: RSP - Homing, CRC error while receiving the remanent safe position
116990 = SMC FFS: RSP - Homing, Homing already done without RSP
116991 = SMC: RSP - State RSP Valid changed during safe operation
116993 = Interner Fehler (µP1)
116994 = internal error (µP1)
116995 = internal error (µP1)
116996 = internal error exchange data (µP1)
116997 = internal error (µP1)
116999 = internal error (µP1)
117000 = internal error (µP1)
117008 = simultaneous edges on channel A and B
117011 = countervalue differs between two channels
117012 = countervalue differs between two channels
117013 = Input A and Ai or input B and Bi are FALSE at the same time
117015 = Overflow of the SafeFrequency-Channel
117016 = max. acceleration exceeded
117024 = Input frequency out of range
117025 = second µP detected channelerror
117026 = Channelerror not acknowledged
117027 = Channelerror acknowledged
117028 = frequency value differs between two µPs
117154 = internal error MFW_PreOp (µP1)
117157 = EPS parameter struct (uP1)
117158 = internal error: invalid cycle time (µP1)
117250 = error on call of safe application
117253 = initial parameter check failed
117254 = error cross communication
117255 = internal error I/O mapping
117256 = error in input mapping of SD application
117257 = error in output mapping of SD application
117258 = invalid domain download
117259 = error domain download into flash
117260 = error importing application files
117261 = SD application download finished
117262 = error external machine options
117263 = cyclic CRC check failed (uP2)
117264 = error SLX command channel
117266 = error additional parameter set download
117267 = reset due to SCMar restart
117268 = -
117269 = excessive X2X input data errors
117270 = flash test executed after SafeKEY format
117271 = error execution monitoring
117272 = SPDO synchronization failed
118784 = function called in wrong state of the state machine
118785 = undefined value for selection switch, info: invalid value
118786 = number of UDID mismatches becomes negative, info: SADR
118787 = number of erroneous modules becomes negative, info: SADR
118788 = EPLS stack posted an invalid state of a module, info: state, sadr
118789 = interface function to EPLS was not called from timer task, info: 0
118790 = wrong internal module state for detection of encoder mismatch.
118791 = wrong internal module state for detection of encoder mismatch
118792 = signaling equivalent states at the same time
118793 = SOD read access returned a NULL pointer, info: object index, sub-index
118794 = SOD attribute access returned invalid information, info: object index, sub-index
118795 = SOD read access returned an invalid saddr, info: object index, sub-index
118796 = EPLS posts invalid information for a module state, info2: saddr
118797 = error UDID ack
118798 = invalid state of cross communication
118799 = error at reading confirmed revision number
118800 = 2 Revisions for 1 SAddr, info: saddr, revision
118801 = internal error UDID-ACK
118802 = error external configuration file
118803 = error external UDIDs (flag)
118804 = error auto confirmation (SN) (uP2)
118805 = error external UDID (Parameter)(uP2)
118806 = error SOD write
118807 = error external machine options
118808 = external machine options discrepancy
118809 = error external startup flags
118811 = error in SOD entry for BIT machine options
118813 = interface to get module flags was called with wrong saddr
118814 = Error technology guarding (uP2)
118815 = Error loading the extended external machine options
118816 = error initializing SMC (uP2)
118817 = Motion function error
118818 = Error loading or linking a libraryfile
118819 = Error of a User CFunction Library
118820 = Error of a firmware CFunction
118821 = Table function error
118822 = Error loading the external tables
118823 = NULL Pointer check failed
118912 = confirmation of a single module mismatch
118913 = confirmation of 2 module mismatches
118914 = confirmation of 3 module mismatches
118915 = confirmation of 4 module mismatches
118916 = confirmation of >4 module mismatches
118917 = confirmation of a new firmware version
118918 = Revision file is incompatible
118919 = safe key file is incompatible
118920 = info auto confirmation file
118921 = safety module missing or nodeguarding failed (uP2)
118922 = Module is not started due to firmware revision mismatch (uP2)
118925 = error FW version, vendor or module type
118926 = safety module parameter error
118927 = additional information technology guarding
118928 = Initializing the motion functions failed
118944 = Warning of an User CFunction Library
118945 = Warning of a firmware CFunction
119058 = internal error: FBK input is 0 (µP2)
119072 = max. frequency exceeded
119075 = internal error exchange data FBK (µP2)
119076 = internal error exchange data results (µP2)
119077 = internal error exchange data testpulse values (µP2)
119078 = execution difference uP2/uP1 (uP1 in failsafe?)
119090 = 2-channel evaluation: discrepancy time elapsed (uP2)
119105 = input error state has changed (uP2)
119106 = internal hardware error at input channel (uP2)
119107 = input error state has changed (uP2)
119202 = internal error MFW_PreOp (µP2)
119203 = EPS parameter struct (uP2)
119204 = internal error: invalid cycle time (µP2)
119205 = parameter error: PLCopen-FBK mode (datapoint usage!) (µP2)
119206 = parameter error: periode of parametric testpulses (µP2)
119207 = parameter error: lowtime of parametric testpulses (µP2)
119208 = parameter error: input filter time (uP2)
119209 = parameter error: discrepancy time (µP2)
119210 = internal error: checkpoints PreOp (µP2)
119211 = internal error: MFW_Init not finished successfully (µP2)
119212 = parameter error: pulse mode (µP2)
119213 = parameter error: pulse source (µP2)
119214 = two-channel evaluation not activated (uP2)
119312 = Parameter error in MFW_Cycle_f1()
119313 = Parameter error MFW_Cycle_f2()
119314 = internal error Xchange data FBK states (µP2)
119315 = Error XchangeData: different gate signals
119316 = Error XchangeData: different feedback signals
119317 = execution difference uP2/uP1 (uP1 in failsafe?)
119318 = Parameter error in MFW_Cycle_f3()
119319 = internal error (default step) in MFW_OutControl()
119320 = Error in function MFW_Cycle_f4()
119321 = internal error: Wrong checkpoint counter value
119328 = output channel test errors cleared (uP2)
119330 = Output teststate has changed (uP2)
119331 = inconsistent output data
119332 = Output teststate has changed (uP2)
119333 = overcurrent error
119334 = Error XchangeData: different feedback signals (µP2)
119335 = internal error feedback high (µP2)
119336 = wrong switching sequence of SafeCtrl and Release (uP2)
119458 = internal error MFW_PreOp (µP2)
119459 = EPS parameter struct (uP2)
119460 = internal error: invalid cycle time (µP2)
119466 = internal error: checkpoints PreOp (µP2)
119468 = output stuck at high detected at PreOp state (uP2)
119469 = internal error feedback high during PreOp (µP2)
119470 = internal error feedback high during PreOp (µP2)
119554 = internal parameter error (uP2)
119555 = internal parameter error (µP2)
119568 = internal error during hardwaretest (uP2)
119569 = internal error not used channel is set (uP2)
119570 = internal error (default step) in MFW_OutControl() (uP2)
119571 = internal error crosscommunication (uP2)
119572 = internal error at feedback evaluation (uP2)
119573 = max. switching frequency exceeded (uP2)
119574 = internal error voltage measurement out of range (µP2)
119575 = internal parameter error (uP2)
119576 = Backfeed voltage at the output (uP2)
119584 = max. switching frequency exceeded (uP2)
119585 = channel outputstate has changed (µP2)
119586 = wrong switching sequence of SafeCtrl and Release
119715 = Internal error in function MFW_PreOp (uP2)
119716 = internal error Feedbacks not 0 at startup (uP2)
119717 = internal error in EPS parameter struct (uP2)
119718 = internal error: invalid cycle time (µP2)
119808 = SMC Fail Safe: Internal error, Program flow
119809 = SMC Fail Safe: Internal error, NULL pointer access
119810 = SMC Fail Safe: Internal error, SPI transfer
119811 = SMC Fail Safe: Internal error, MFW NVM data memory
119812 = SMC Fail Safe: Internal error, Communication EnDat Master
119813 = SMC Fail Safe: Internal error, Communication ACOPOS
119814 = SMC Fail Safe: Internal error, Communication Encoder
119815 = SMC Fail Safe: Module/compensation data is incompatible!
119816 = SMC Fail Safe: CRC of the module/compensation data is not correct!
119817 = SMC Fail Safe: SOS and STO not connected but needed for RSP
119824 = SMC Fail Safe: Internal error, Cross communication of checkpoints
119825 = SMC Fail Safe: Internal error, Cross communication of status word
119826 = SMC Fail Safe: Internal error, Cross communication of output state
119827 = SMC Fail Safe: Internal error, Cross communication of EnDat position
119828 = SMC Fail Safe: Internal error, Cross communication of EnDat error register
119829 = SMC Fail Safe: Internal error, Cross communication of Encoder state machine
119830 = SMC Fail Safe: Internal error, Cross communication of EnDat state machine
119831 = SMC Fail Safe: Internal error, Cross communication of EnDat state machine
119832 = SMC Fail Safe: Encoder configuration - Units per number of revolution invalid
119833 = SMC Fail Safe: Encoder configuration - Normalized maximal speed invalid
119834 = SMC Fail Safe: Encoder configuration - Encoder resolution too low
119835 = SMC Fail Safe: Encoder configuration - Encoder resolution too high
119836 = SMC Fail Safe: Encoder configuration - Units resolution too high
119837 = SMC Fail Safe: Encoder configuration - One unit is shorter than one nm
119838 = SMC Fail Safe: Encoder mismatch - Configuration data changed several times
119839 = SMC Fail Safe: Encoder mismatch - Configuration data changed
119840 = SMC Fail Safe: Wrong parameterization
119841 = SMC Fail Safe: Module cycle time is not valid
119842 = SMC Fail Safe: Parameterization - Deceleration ramp is too steep
119843 = SMC Fail Safe: Internal state machine is in Fail Safe State
119844 = SMC Fail Safe: Deactivated safety function was requested
119845 = SMC Fail Safe: SMS - Speed limit is out of range
119846 = SMC Fail Safe: SLS1 - Speed limit is out of range
119847 = SMC Fail Safe: SLS2 - Speed limit is out of range
119848 = SMC Fail Safe: SLS3 - Speed limit is out of range
119849 = SMC Fail Safe: SLS4 - Speed limit is out of range
119850 = SMC Fail Safe: Standstill speed limit is out of range
119851 = SMC Fail Safe: SLS1 - Speed limit violates the configuration instruction
119852 = SMC Fail Safe: SLS2 - Speed limit violates the configuration instruction
119853 = SMC Fail Safe: SLS3 - Speed limit violates the configuration instruction
119854 = SMC Fail Safe: SLS4 - Speed limit violates the configuration instruction
119855 = SMC Fail Safe: Standstill Speed limit violates the configuration instruction
119856 = SMC Fail Safe: Violation of parameter limits
119857 = SMC Fail Safe: SMP is used but Homing was not configured
119858 = SMC Fail Safe: SMP - Lower position limit is greater or equal than upper limit
119859 = SMC Fail Safe: SLP is used but Homing was not configured
119860 = SMC Fail Safe: SLP - Lower position limit is greater or equal than upper limit
119861 = SMC Fail Safe: SLP - Position window outside SMP position window
119862 = SMC Fail Safe: SMP - Tolerance is greater than SMP position window
119863 = SMC Fail Safe: SLP - Tolerance is greater than SLP position window
119864 = SMC Fail Safe: Value of Deceleration ramp is out of range
119876 = SMC Fail Safe: Homing - Max. trigger speed is out of range
119877 = SMC Fail Safe: Homing - Ref Switch: No reference switch connected
119878 = SMC Fail Safe: Homing - Home Offset: No absolute encoder connected
119879 = SMC Fail Safe: Homing - Home Offset with Correction: SMP not configured
119880 = SMC Fail Safe: Homing - SMP window is greater than safe absolute encoder range
119881 = SMC Fail Safe: Homing - SLP window is greater than safe absolute encoder range
119882 = SMC Fail Safe: Homing - Encoder doesn't support a safe reference pulse
119883 = SMC Fail Safe: Homing - Speed tolerance is out of range
119884 = SMC Fail Safe: Homing - reference pulse : Max. trigger speed is too big
119885 = SMC Fail Safe: Homing - Function is requested but not configured
119886 = SMC Fail Safe: Homing - RefSwitch bit is set but not configured
119887 = SMC Fail Safe: Homing - Position is out of SMP window
119888 = SMC Fail Safe: Homing - Direct with reference pulse: Not supported
119889 = SMC Fail Safe: Internal error, Cross communication of output signals
119890 = SMC Fail Safe: Internal error, Cross communication of output state machine
119892 = SMC Fail Safe: Program error in PreOperational state
119893 = SMC Fail Safe: Safe output - Stuck at high detected
119894 = SMC Fail Safe: Safe output - Test state has changed
119895 = SMC Fail Safe: Encoder - Speed limit exceeded
119896 = SMC Fail Safe: Encoder - Acceleration limit exceeded
119897 = -
119898 = -
119899 = SMC Fail Safe: Encoder mismatch detected
119900 = SMC Fail Safe: Internal error, Lockbit set
119901 = SMC Fail Safe: Velocity error tolerance too large
119902 = SMC Fail Safe: Lag error tolerance too large
119903 = SMC Fail Safe: Encoder - Configuration error
119904 = SMC Fail Safe: Homing - Configuration error
119905 = SMC Fail Safe: Internal error, Invalid current sensor resolution
119906 = SMC Fail Safe: Internal error, Invalid current sensor measurement range
119907 = SMC Fail Safe: Internal error, Current values sum not plausible
119908 = SMC Fail Safe: Internal error, Cross communication of stator current vector
119909 = SMC Fail Safe: Internal error, Cross communication of current vector angle
119910 = SMC Fail Safe: Internal error, Cross communication of the status register IPWM
119911 = SMC Fail Safe: Internal error, Cross communication FPGACom state machine
119912 = SMC Fail Safe: Internal error, FPGA communication
119913 = SMC Fail Safe: Internal error, FPGA SinCos - Reference voltage Channel A
119914 = SMC Fail Safe: Internal error, FPGA SinCos - Reference voltage Channel B
119915 = SMC Fail Safe: Internal error, FPGA SinCos - Configuration
119916 = SMC Fail Safe: Internal error, Hardware tests - Voltage monitoring
119917 = SMC Fail Safe: Internal error, ADC compensation data - Flash validation
119918 = SMC Fail Safe: Internal error, FPGA current measurement - ADC processing
119919 = SMC Fail Safe: Internal error, FPGA current measurement - Reference monitoring
119920 = SMC Fail Safe: Internal error, FPGA current measurement - Efficiency test
119921 = SMC Fail Safe: Internal error, FPGA current measurement - Configuration
119922 = SMC Fail Safe: Internal error, FPGA SinCos - Efficiency test
119923 = SMC Fail Safe: SBT Parameterization - Current threshold too high
119924 = SMC Fail Safe: SBT Parameterization - External load greater than threshold
119925 = SMC Fail Safe: SBT Parameterization - External load too small
119927 = SMC Fail Safe: SBT Parameterization - External load too high
119928 = SMC FS: Homing - S_SwitchHomingMode is set but not connected
119929 = SMC FS: Homing - S_SwitchHomingMode is connected but ReqHoming not
119930 = SMC FS: Homing - S_SwitchHomingMode connection and configuration not conform
119931 = SMC Fail Safe: Internal error, Cross communication of RSP receive data frame
119932 = SMC Fail Safe: Internal error, Cross communication of RSP send data frame
119933 = SMC Fail Safe: RSP - Save operation failed
119934 = SMC Fail Safe: RSP - Homing, SOS position tolerance too big
119959 = SMC Fail Safe: Additional safety parameters: Placeholder enable bit is set
119960 = SMC Fail Safe: Additional safety parameters: Invalid payload size
119961 = SMC: Interner error, CUnit test
119962 = SMC Fail Safe: Additional safety parameters: Invalid structure size
119963 = SMC Fail Safe: Received data for additional safety parameters too big
119964 = SMC Fail Safe: CRC chekc of the additional safety parameters failed
119969 = SMC Fail Safe: Incompatible parameter structure
119970 = SMC Fail Safe: Incompatible axis type
119971 = SMC Fail Safe: Error in PreOperational function
119972 = SMC Fail Safe: Cross communication SinCos status during FPGA boot phase
119973 = SMC Fail Safe: Encoder not configured but needed for safety functions
119974 = SMC Fail Safe: Squared vector length too large
119975 = SMC Fail Safe: Cross communication vector control trigger counter
119976 = SMC Fail Safe: Value of SinCos status register not plausible
119977 = SMC Fail Safe: Internal error, Vector length is not equal to 1Vpp after reset
119978 = SMC Fail Safe: SBT Current threshold too small
119979 = SMC Fail Safe: Internal error while processing the additional paramters
119980 = SMC Fail Safe: Homing - RefSwitch is connected but ReqHoming not
119981 = SMC Fail Safe: Additional safety parameters: Invalid axis type ID
119982 = SMC Fail Safe: Additional safety parameters: Invalid structure version
119983 = SMC: Safely Limited Acceleration - Violation of the acceleration monitoring
119984 = SMC: Safe Brake Test - SBT: Timeout
119985 = SMC: Safe Brake Test - SBT: SBC is active
119986 = SMC: Safe Brake Test - Illegal sector change
119987 = SMC: additional parameters - Error during download
119988 = SMC FFS: RSP - Homing, stored position invalid
119989 = SMC: Safe Brake Test - Rho has left the actual sector too erly
119990 = SMC: Safe Brake Test - Measured and parametrized external load differ
119991 = SMC: Safe Brake Test - Current fell below parametrized test current threshold
119992 = SMC Functional Fail Safe: Drift of raw positions between õP1 and õP2 to big
119993 = SMC Functional Fail Safe: internal error
119994 = SMC Functional Fail Safe: Encoder not ready
119995 = SMC: Safe Brake Test - Test current direction not correct
119996 = SMC: Safe Brake Test - Parametrized test current threshold not reached
119997 = SMC: Safe Brake Test - Violation of the position tolerance
119998 = SMC Functional Fail Safe: Encoder error SinCos processing
119999 = SMC: Safe Brake Test - Test interval elapsed, test required
120000 = SMC: Current sum exeeded tolerance range
120001 = SMC: Current sensor range exceeded phase U
120002 = SMC: Current sensor range exceeded phase V
120003 = SMC: Current sensor range exceeded phase W
120004 = SMC: Compensation data incomplete
120005 = SMC Functional Fail Safe: SS2, SOS Violation of standstill position tolerance
120006 = SMC Functional Fail Safe: Encoder error was detected
120007 = SMC Functional Fail Safe: SDI - Violations of the safe direction
120008 = SMC Functional Fail Safe: SDI - Violation of the positive direction
120009 = SMC Functional Fail Safe: SDI - Violation of the negative direction
120010 = SMC Functional Fail Safe: SLI - Violation of standstill speed limit
120011 = SMC Functional Fail Safe: SLI - Violation of position window (increments)
120012 = SMC Functional Fail Safe: Violation of the actual speed limit
120013 = SMC Functional Fail Safe: Violation of the deceleration ramp
120014 = SMC Functional Fail Safe: SMS - Violation of the speed limit
120015 = SMC Functional Fail Safe: SOS - Violation of the speed limit
120016 = SMC Functional Fail Safe: SS2 - Violation of the speed limit
120017 = SMC Functional Fail Safe: SLS1 - Violation of the speed limit
120018 = SMC Functional Fail Safe: SLS2 - Violation of the speed limit
120019 = SMC Functional Fail Safe: SLS3 - Violation of the speed limit
120020 = SMC Functional Fail Safe: SLS4 - Violation of the speed limit
120021 = SMC Functional Fail Safe: Alive test of set position was not executed
120022 = SMC Functional Fail Safe: Warning on output was not acknowledged
120023 = SMC Functional Fail Safe: Alive test - Monitoring timeout
120024 = SMC Functional Fail Safe: SMP - Homing timeout exceeded
120025 = SMC Functional Fail Safe: SMP - Violation of the deceleration ramp
120026 = SMC Functional Fail Safe: SLP - Violation of the deceleration ramp
120027 = SMC Functional Fail Safe: SMP - Violation of lower SMP limit
120028 = SMC Functional Fail Safe: SMP - Violation of upper SMP limit
120029 = SMC Functional Fail Safe: SLP - Violation of lower SLP limit
120030 = SMC Functional Fail Safe: SLP - Violation of upper SLP limit
120031 = SMC Functional Fail Safe: SMP - Movement in neg. direction outside SMP limit
120032 = SMC Functional Fail Safe: SMP - Movement in pos. direction outside SMP limit
120033 = SMC Functional Fail Safe: SLP requested, axis is not homed yet
120034 = SMC Functional Fail Safe: SMP, SLP - Internal error
120035 = SMC Functional Fail Safe: SMP, SLP - INT32 overflow of S_SafePosition
120036 = SMC Functional Fail Safe: Homing - Timeout elapsed
120037 = SMC Functional Fail Safe: Homing - Standstill Speed tolerance violated
120038 = SMC Functional Fail Safe: Homing reference pulse - Max. trigger speed exceeded
120039 = SMC Functional Fail Safe: Homing - Movement invalid
120040 = SMC Functional Fail Safe: Homing offset - Position outside INT32 range
120041 = SMC Functional Fail Safe: Homing offset - Violation of safe encoder range
120042 = SMC: Encoder mismatch - Length of encoder configuration data changed
120043 = SMC: Encoder mismatch - Serial number of encoder changed
120044 = SMC: Encoder mismatch - Version changed or no encoder data stored
120045 = SMC: Encoder mismatch - EnDat master data or encoder data changed
120046 = SMC: Encoder - EnDat Master state error register is set
120047 = SMC Functional Fail Safe: Homing failed
120048 = SMC Functional Fail Safe: Violation of safety function
120049 = SMC Functional Fail Safe: Function block switched back into IDLE state
120050 = Channel test errors cleared. (uP2)
120051 = SMC Functional Fail Safe: Safe output - Teststate has changed
120052 = SMC: Encoder - Received position not valid
120053 = SMC: Encoder mismatch detected
120054 = SMC: Encoder - Initialization error
120055 = SMC: Encoder - Debug information
120056 = SMC: Internal warning, Lockbit set
120057 = SMC: Encoder - SafeSpeed exceeded INT16 range
120058 = SMC: Encoder - EnDat Master encoder error register is set
120059 = SMC: Velocity error limit exceeded
120060 = SMC: Position lag error limit exceeded
120061 = SMC: Encoder - Rounding error due to parametrization
120062 = SMC: Encoder - Length of physical reference system too large
120063 = SMC Fail Safe: Encoder - Acceleration limit exceeded
120065 = internal parameter error (uP2)
120066 = internal parameter error (uP2)
120080 = internal hardware error (driver) (uP2)
120081 = inconsistent output data (uP2)
120083 = internal X-com error (uP1 in failsafe?)
120084 = internal error test pattern (uP2)
120085 = max. switching frequency exceeded (uP2)
120096 = relay stuck at low (uP2)
120097 = relay stuck at high (uP2)
120227 = EPS parameter struct (uP2)
120228 = internal hardware error (init) (uP2)
120229 = EPS parameter struct (uP2)
120230 = internal error: invalid cycle time (µP2)
120308 = Error in Crosscommunikation
120309 = Reference-input doesn't match actual input state
120322 = internal error (µP1)
120323 = internal error (µP1)
120324 = internal error (µP2)
120325 = error in voltagemonitoring (µP2)
120339 = internal error exchange data (µP2)
120340 = internal error during hardwaretests (µP2)
120341 = internal error (µP1)
120344 = conversiontime of AD-converter to big (µP2)
120345 = state of channel error evaluation has changed
120352 = internal error testingtime exceeded (µP2)
120353 = state of threshold evaluation has changed
120354 = state of threshold evaluation has changed
120355 = internal error PreOpStep to long (µP2)
120356 = internal error modul not calibrated (µP2)
120357 = internal error incorrect CRC of calibration data (µP2)
120358 = output current for sensor feed exceeded (µP2)
120359 = No sensor connected
120360 = error during shunttest (µP2)
120483 = internal error MFW_PreOp (µP2)
120484 = -
120485 = EPS parameter struct (uP2)
120486 = internal error: invalid cycle time (µP2)
120487 = wrong sensortyp
120488 = thresholdparamter out of range
120489 = internal error MFW_PreOp (µP1)
120576 = Warning message from customized library
120577 = Error message from customized library.
120588 = Error Utilities library: out of range
120589 = Library function is not supported on the specific SL
120612 = Undefined state in Library C function code detected
120613 = Nullpointer in a Library C function detected
120614 = FParameters Build info
120615 = FParameters configuration info.
120616 = Get FOutput Data info
120617 = Send FInput Telegram info
120624 = Run psd Data exchange info
120625 = Stop psd Data exchange info
120629 = System path invalid back value
120630 = PNIO-Stack communication info
120631 = FUB intializing info
120632 = read FParameters from GPDO 
120633 = PSD Initializing invalid back value
120640 = PSD FParameters back values not valid
120641 = PSD FOutTelegram/Data back value not valid
120642 = PSD FInData/Telegram back value not valid
120643 = PSD run back value not valid
120644 = PSD stop back value not valid
121080 = SMC FFS: RSP - Homing, INT32 overflow of S_SafePosition
121082 = SMC FFS: RSP - Homing, Positional change during power off too big
121083 = SMC FFS: RSP - Homing, Config changed
121085 = SMC FFS: RSP - Homing, CRC error while receiving the remanent safe position
121086 = SMC FFS: RSP - Homing, Homing already done without RSP
121087 = SMC: RSP - State RSP Valid changed during safe operation
121089 = internal error (µP2)
121090 = internal error (µP2)
121091 = internal error (µP2)
121092 = internal error exchange data (µP2)
121093 = internal error (µP2)
121095 = internal error (µP2)
121096 = internal error (µP2)
121104 = simultaneous edges on channel A and B
121107 = countervalue differs between two channels
121108 = countervalue differs between two channels
121109 = Input A and Ai or input B and Bi are FALSE at the same time
121111 = Overflow of the SafeFrequency-Channel
121112 = max. acceleration exceeded
121120 = Input frequency out of range
121121 = second µP detected channelerror
121122 = Channelerror not acknowledged
121123 = Channelerror acknowledged
121124 = frequency value differs between two µPs
121250 = internal error MFW_PreOp (µP2)
121253 = EPS parameter struct (uP2)
121254 = internal error: invalid cycle time (µP2)
121346 = error on call of safe application (uP2)
121349 = initial parameter check failed (uP2)
121350 = error cross communication (uP2)
121351 = internal error I/O mapping (uP2)
121352 = error in input mapping of SD application
121353 = error in output mapping of SD application (uP2)
121354 = invalid domain download (uP2)
121355 = error domain download into flash (uP2)
121356 = error importing application files (uP2)
121358 = error external machine options (uP2)
121359 = cyclic CRC check failed
121366 = flash test executed after SafeKEY format
121367 = error execution monitoring (uP2)
122885 = start bootup
122886 = powerfail message
122887 = reset after user operation
122888 = time/date changed
122889 = time/date changed
122890 = new firmware received
122891 = date/time changed (PME)
122892 = firmwaredownload error uP1
122893 = firmwaredownload error uP2
122894 = SafeKEY missing
122895 = Mapping CRC error.
122896 = Mapping CRC error.
122897 = File has changed
122898 = Error during file transfer
122899 = File transfer successful
122901 = Filetransfer authorization ok
122902 = File transfer authorization not ok
122903 = Reboot OK
122904 = Reboot not authorized
122905 = Restart of safe processors delayed.
122906 = Remote control access
122907 = invalid file on SafeKEY
122908 = error asynchronous communication
122909 = Invalid mapping
122910 = Invalid SafeKEY
122911 = Error in the TCP channel
123392 = Program error
123395 = Program mismatch
123396 = Could not start task
123397 = Excessive task delay
123398 = Could not open semaphore
123401 = Could not start task
123402 = Could not read time
123403 = Inconsistent frame copies
123404 = Lock reset failed
123405 = Unlock reset failed
123406 = Unlock timeout exceeded
123410 = Inconsistent safe-key files
123411 = Inconsistent safe-key files
123412 = Inconsistent safe-key files
123413 = Inconsistent safe-key files
123414 = Invalid safe-key id received
123415 = Inconsistent UDID files
123416 = Inconsistent UDID files
123417 = Inconsistent UDID files
123418 = Inconsistent UDID files
123419 = Inconsistent firmware revision files
123420 = Inconsistent firmware revision files
123421 = Inconsistent firmware revision files
123422 = Inconsistent firmware revision files
123423 = Inconsistent firmware revision files
123424 = Inconsistent firmware revision files
123425 = Inconsistent firmware revision files
123426 = Inconsistent firmware revision files
123427 = Inconsistent firmware revision files
123428 = Inconsistent firmware revision files
123429 = Inconsistent firmware revision files
123430 = Inconsistent firmware revision files
123431 = Inconsistent firmware revision files
123440 = File buffer to short
123441 = File open failed
123442 = Get file length failed
123443 = Read file failed
123444 = Write file failed
123445 = Close file failed
123448 = Communication with SLX not possible
123449 = Open channel failed
123450 = Receive response failed
123451 = Send request failed
123452 = Close channel failed
123453 = Invalid response received
123454 = Received response to long
123458 = Queue open failed
123459 = Queue statistics failed
123460 = Receive from queue failed
123461 = Send to queue failed
123462 = SNMT/SSDO frames dropped
123465 = Safe-key not acknowledged
123469 = Program CRC mismatch
123471 = Safe-key data incomplete
123472 = Wrong safe-key version
123475 = Parameter file incomplete
123476 = Parameter file header length invalid
123477 = Parameter header version invalid
123478 = Parameter file length invalid
123479 = SCM section version of parameter file invalid
123480 = Parameter file header CRC invalid
123481 = Data section of parameter file invalid
123482 = Data section of parameter file invalid
123483 = CRC section of parameter file invalid
123484 = CRC section of parameter file invalid
123485 = CRC section of parameter file invalid
123486 = Data CRC of parameter file invalid
123491 = UDID file incomplete
123492 = UDID file length invalid
123493 = UDID file header length invalid
123494 = UDID file version invalid
123495 = UDID file length invalid
123496 = UDID file header CRC invalid
123497 = Data section of UDID file invalid
123498 = Data section of UDID file invalid
123499 = CRC section of UDID file invalid
123500 = CRC section of UDID file invalid
123501 = CRC section of UDID file invalid
123502 = Data CRC of UDID file invalid
123507 = Firmware file incomplete
123508 = Data section of firmware file invalid
123509 = Auhentification of firmware file invalid
123510 = Too many entries in firmware file
123511 = Invalid length of firmware file entries
123512 = Wrong firmware file version
123513 = Data section of firmware file invalid
123514 = Data CRC of firmware file invalid
123515 = Auhentification of firmware file invalid
123516 = Auhentification of firmware file invalid
123517 = Feature flags of firmware file invalid
123518 = Authentification CRC of firmware file invalid
123523 = Configuration file invalid
123524 = Configuration file length invalid
123525 = Configuration file section count invalid
123526 = Configuration file header length invalid
123527 = Configuration file version invalid
123528 = UDID section of configuration file invalid
123529 = UDID section of configuration file invalid
123530 = UDID section of configuration file invalid
123531 = Machine option section of configuration file invalid
123532 = Machine option section of configuration file invalid
123533 = Machine option section of configuration file invalid
123534 = Module flag section of configuration file invalid
123535 = Module flag section of configuration file invalid
123536 = Module flag section of configuration file invalid
123537 = Configuration file header CRC invalid
123550 = UDID section of configuration file incomplete
123551 = Too many UDIDs in configuration file
123552 = UDID section of configuration file incomplete
123553 = UDID entries in configuration file invalid
123554 = UDID section version in configuration file invalid
123555 = UDID section of configuration file invalid
123556 = UDID CRC in configuration file invalid
123557 = CRC of configuration file invalid
123562 = Parameter data incomplete
123564 = Parameter data incomplete
123566 = Invalid address in data
123569 = Write buffer full
123570 = Write invalid address
123572 = Parameter length invalid
123573 = Parameter missing
123574 = Invalid address in parameter
123576 = Write invalid address
123577 = Invalid parameter header length
123578 = Invalid parameter header address
123579 = Invalid parameter header number
123582 = Frame incomplete
123583 = Frame length invalid
123584 = Frame CRC invalid
123585 = Sub-frames inconsistent
123586 = SPDO frame discovered
123587 = Invalid frame discovered
123590 = SCM command incomplete
123594 = SCM response incomplete
123597 = SLX channel message incomplete
123598 = SLX channel variable incomplete
123601 = SLX channel message incomplete
123604 = Invalid module address
123605 = No encoder for module address
123606 = Invalid UDID
123607 = Duplicate UDIDs
123608 = Set-to-operational for unacknowledged UDID
123612 = Invalid module address
123613 = Invalid parameter data
123614 = Invalid firmware revision
123615 = Set-to-operational for unacknowledged firmware
123619 = Invalid module address
123620 = Checksum length too long
123621 = Invalid checksum
123622 = Set-to-operational for incompatible parameter
123626 = Invalid module address
123627 = Invalid additional parameter
123628 = Invalid additional parameter
123629 = Invalid additional parameter
3155778 = Verification error for the certificate
